Долгая загрузка после обновления

Ответить
Аватара пользователя
Vochatrak
Сообщения: 805
Зарегистрирован: 22 сен 2014, 01:21
Operating system: Rosa fresh R5

Долгая загрузка после обновления

Сообщение Vochatrak » 04 фев 2018, 21:20

В общем после недавнего обновления, при загрузке появляется надпись о каком-то x2duuid и отсчет 1.5 минуты.
URL пробы: https://linux-hardware.org/?probe=d6185dbb7c

Вот dmesg:

Код: Выделить всё

[    0.000000] Linux version 4.13.16-nrj-desktop-1rosa-x86_64 (mockbuild@rosa2012.1-base) (gcc version 5.4.1 20170404 (ROSA) (Linaro GCC 5.4-2017.05)) #1 SMP PREEMPT Wed Dec 6 11:33:19 UTC 2017
[    0.000000] Command line: BOOT_IMAGE=/@/boot/vmlinuz-4.13.16-nrj-desktop-1rosa-x86_64 root=UUID=26627f12-1dcf-4c14-8aab-e54a6840b07e ro rootflags=subvol=@ splash=silent logo.nologo quiet zswap.enabled=1 zswap.max_pool_percent=70 scsi_mod.use_blk_mq=1 nomodeset resume=UUID=fb779e20-2919-4c92-a13c-af5bcbe7848b
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cfedffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cfee0000-0x00000000cfee2fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000cfee3000-0x00000000cfeeffff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000cfef0000-0x00000000cfefffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f4000000-0x00000000f7ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] random: fast init done
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: Gigabyte Technology Co., Ltd. EP45-DS3L/EP45-DS3L, BIOS F11b 09/03/2009
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x230000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CDFFF write-protect
[    0.000000]   CE000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-through
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask 0F00000000 write-back
[    0.000000]   1 base 00E0000000 mask 0FE0000000 uncachable
[    0.000000]   2 base 00D0000000 mask 0FF0000000 uncachable
[    0.000000]   3 base 0100000000 mask 0F00000000 write-back
[    0.000000]   4 base 0200000000 mask 0FC0000000 write-back
[    0.000000]   5 base 0230000000 mask 0FF0000000 uncachable
[    0.000000]   6 base 00CFF00000 mask 0FFFF00000 uncachable
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] mtrr: your BIOS has configured an incorrect mask, fixing it.
[    0.000000] mtrr: your BIOS has configured an incorrect mask, fixing it.
[    0.000000] mtrr: your BIOS has configured an incorrect mask, fixing it.
[    0.000000] mtrr: your BIOS has configured an incorrect mask, fixing it.
[    0.000000] mtrr: your BIOS has configured an incorrect mask, fixing it.
[    0.000000] mtrr: your BIOS has configured an incorrect mask, fixing it.
[    0.000000] mtrr: your BIOS has configured an incorrect mask, fixing it.
[    0.000000] e820: update [mem 0xcff00000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xcfee0 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f5750-0x000f575f] mapped at [ffff8800000f5750]
[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[    0.000000] BRK [0x13125d000, 0x13125dfff] PGTABLE
[    0.000000] BRK [0x13125e000, 0x13125efff] PGTABLE
[    0.000000] BRK [0x13125f000, 0x13125ffff] PGTABLE
[    0.000000] BRK [0x131260000, 0x131260fff] PGTABLE
[    0.000000] BRK [0x131261000, 0x131261fff] PGTABLE
[    0.000000] BRK [0x131262000, 0x131262fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x31398000-0x349c3fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F7150 000014 (v00 GBT   )
[    0.000000] ACPI: RSDT 0x00000000CFEE3040 000038 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: FACP 0x00000000CFEE30C0 000074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: DSDT 0x00000000CFEE3180 004B3E (v01 GBT    GBTUACPI 00001000 MSFT 0100000C)
[    0.000000] ACPI: FACS 0x00000000CFEE0000 000040
[    0.000000] ACPI: HPET 0x00000000CFEE7E00 000038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
[    0.000000] ACPI: MCFG 0x00000000CFEE7E80 00003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: TAMG 0x00000000CFEE7EC0 00667A (v01 GBT    GBT   B0 5455312E BG?? 00020101)
[    0.000000] ACPI: APIC 0x00000000CFEE7D00 000084 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000022fffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x22fff6000-0x22fff9fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000022fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000cfedffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000022fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000022fffffff]
[    0.000000] On node 0 totalpages: 2096764
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 13244 pages used for memmap
[    0.000000]   DMA32 zone: 847584 pages, LIFO batch:31
[    0.000000]   Normal zone: 19456 pages used for memmap
[    0.000000]   Normal zone: 1245184 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcfee0000-0xcfee2fff]
[    0.000000] PM: Registered nosave memory: [mem 0xcfee3000-0xcfeeffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcfef0000-0xcfefffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcff00000-0xf3ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
[    0.000000] e820: [mem 0xcff00000-0xf3ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 39 pages/cpu @ffff88022fc00000 s119256 r8192 d32296 u524288
[    0.000000] pcpu-alloc: s119256 r8192 d32296 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 2063979
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/@/boot/vmlinuz-4.13.16-nrj-desktop-1rosa-x86_64 root=UUID=26627f12-1dcf-4c14-8aab-e54a6840b07e ro rootflags=subvol=@ splash=silent logo.nologo quiet zswap.enabled=1 zswap.max_pool_percent=70 scsi_mod.use_blk_mq=1 nomodeset resume=UUID=fb779e20-2919-4c92-a13c-af5bcbe7848b
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 8114920K/8387056K available (9469K kernel code, 1524K rwdata, 4016K rodata, 1580K init, 1232K bss, 272136K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] ftrace: allocating 38133 entries in 149 pages
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.001000] tsc: Detected 3612.332 MHz processor
[    0.001000] Calibrating delay loop (skipped), value calculated using timer frequency.. 7224.66 BogoMIPS (lpj=3612332)
[    0.001000] pid_max: default: 32768 minimum: 301
[    0.001000] ACPI: Core revision 20170531
[    0.003126] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.003149] Security Framework initialized
[    0.003150] SELinux:  Disabled at boot.
[    0.005827] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.007532] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.007601] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.007656] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.007876] CPU: Physical Processor ID: 0
[    0.007876] CPU: Processor Core ID: 0
[    0.007878] mce: CPU supports 6 MCE banks
[    0.007883] CPU0: Thermal monitoring enabled (TM2)
[    0.007886] process: using mwait in idle threads
[    0.007890] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[    0.007890] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[    0.008004] Freeing SMP alternatives memory: 36K
[    0.009111] smpboot: Max logical packages: 1
[    0.009472] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.020000] smpboot: CPU0: Intel(R) Xeon(R) CPU           E5440  @ 2.83GHz (family: 0x6, model: 0x17, stepping: 0xa)
[    0.023008] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[    0.023016] ... version:                2
[    0.023016] ... bit width:              40
[    0.023017] ... generic registers:      2
[    0.023017] ... value mask:             000000ffffffffff
[    0.023018] ... max period:             000000007fffffff
[    0.023018] ... fixed-purpose events:   3
[    0.023019] ... event mask:             0000000700000003
[    0.025002] Hierarchical SRCU implementation.
[    0.029072] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.031002] smp: Bringing up secondary CPUs ...
[    0.039012] x86: Booting SMP configuration:
[    0.039013] .... node  #0, CPUs:      #1
[    0.040000] TSC synchronization [CPU#0 -> CPU#1]:
[    0.040000] Measured 3517576 cycles TSC warp between CPUs, turning off TSC clock.
[    0.040000] tsc: Marking TSC unstable due to check_tsc_sync_source failed
[    0.048008]  #2 #3
[    0.056753] smp: Brought up 1 node, 4 CPUs
[    0.056753] smpboot: Total of 4 processors activated (28898.65 BogoMIPS)
[    0.057452] devtmpfs: initialized
[    0.057452] x86/mm: Memory block size: 128MB
[    0.058368] PM: Registering ACPI NVS region [mem 0xcfee0000-0xcfee2fff] (12288 bytes)
[    0.058368] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.058368] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.058368] xor: measuring software checksum speed
[    0.068001]    prefetch64-sse: 20772.000 MB/sec
[    0.078001]    generic_sse: 17564.000 MB/sec
[    0.078001] xor: using function: prefetch64-sse (20772.000 MB/sec)
[    0.078004] pinctrl core: initialized pinctrl subsystem
[    0.078041] RTC time: 17:49:05, date: 02/04/18
[    0.078118] NET: Registered protocol family 16
[    0.079013] cpuidle: using governor ladder
[    0.080003] cpuidle: using governor menu
[    0.080003] PCCT header not found.
[    0.080051] ACPI: bus type PCI registered
[    0.080053] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.080103] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000)
[    0.080105] PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820
[    0.080111] pmd_set_huge: Cannot satisfy [mem 0xf4000000-0xf4200000] with a huge-page mapping due to MTRR override.
[    0.080187] PCI: Using configuration type 1 for base access
[    0.082142] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.099009] raid6: sse2x1   gen()  6058 MB/s
[    0.116001] raid6: sse2x1   xor()  6224 MB/s
[    0.133009] raid6: sse2x2   gen()  6679 MB/s
[    0.150004] raid6: sse2x2   xor()  7623 MB/s
[    0.167003] raid6: sse2x4   gen() 10742 MB/s
[    0.184002] raid6: sse2x4   xor()  8546 MB/s
[    0.184003] raid6: using algorithm sse2x4 gen() 10742 MB/s
[    0.184004] raid6: .... xor() 8546 MB/s, rmw enabled
[    0.184005] raid6: using ssse3x2 recovery algorithm
[    0.184060] ACPI: Added _OSI(Module Device)
[    0.184060] ACPI: Added _OSI(Processor Device)
[    0.184061] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.184062] ACPI: Added _OSI(Processor Aggregator Device)
[    0.186289] ACPI: Interpreter enabled
[    0.186306] ACPI: (supports S0 S3 S4 S5)
[    0.186308] ACPI: Using IOAPIC for interrupt routing
[    0.186336] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.187068] ACPI: Enabled 11 GPEs in block 00 to 3F
[    0.190599] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[    0.190603] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.190606] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.190759] PCI host bridge to bus 0000:00
[    0.190761] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.190762] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.190763] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.190764] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.190765] pci_bus 0000:00: root bus resource [mem 0xcff00000-0xfebfffff window]
[    0.190766] pci_bus 0000:00: root bus resource [bus 00-3f]
[    0.190773] pci 0000:00:00.0: [8086:2e20] type 00 class 0x060000
[    0.190790] DMAR: Forcing write-buffer flush capability
[    0.190790] DMAR: Disabling IOMMU for graphics on this chipset
[    0.190847] pci 0000:00:01.0: [8086:2e21] type 01 class 0x060400
[    0.190873] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.190942] pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300
[    0.190976] pci 0000:00:1a.0: reg 0x20: [io  0xff00-0xff1f]
[    0.191062] pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300
[    0.191095] pci 0000:00:1a.1: reg 0x20: [io  0xfe00-0xfe1f]
[    0.191176] pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300
[    0.191209] pci 0000:00:1a.2: reg 0x20: [io  0xfd00-0xfd1f]
[    0.191293] pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320
[    0.191308] pci 0000:00:1a.7: reg 0x10: [mem 0xfdfff000-0xfdfff3ff]
[    0.191419] pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300
[    0.191434] pci 0000:00:1b.0: reg 0x10: [mem 0xfdff8000-0xfdffbfff 64bit]
[    0.191486] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.191549] pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400
[    0.191600] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.191666] pci 0000:00:1c.4: [8086:3a48] type 01 class 0x060400
[    0.191720] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.191784] pci 0000:00:1c.5: [8086:3a4a] type 01 class 0x060400
[    0.191837] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.191900] pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300
[    0.191933] pci 0000:00:1d.0: reg 0x20: [io  0xfc00-0xfc1f]
[    0.192016] pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300
[    0.192048] pci 0000:00:1d.1: reg 0x20: [io  0xfb00-0xfb1f]
[    0.192129] pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300
[    0.192162] pci 0000:00:1d.2: reg 0x20: [io  0xfa00-0xfa1f]
[    0.192248] pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320
[    0.192263] pci 0000:00:1d.7: reg 0x10: [mem 0xfdffe000-0xfdffe3ff]
[    0.192371] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[    0.192462] pci 0000:00:1f.0: [8086:3a18] type 00 class 0x060100
[    0.192596] pci 0000:00:1f.2: [8086:3a22] type 00 class 0x010601
[    0.192609] pci 0000:00:1f.2: reg 0x10: [io  0xf900-0xf907]
[    0.192614] pci 0000:00:1f.2: reg 0x14: [io  0xf800-0xf803]
[    0.192619] pci 0000:00:1f.2: reg 0x18: [io  0xf700-0xf707]
[    0.192624] pci 0000:00:1f.2: reg 0x1c: [io  0xf600-0xf603]
[    0.192629] pci 0000:00:1f.2: reg 0x20: [io  0xf500-0xf51f]
[    0.192634] pci 0000:00:1f.2: reg 0x24: [mem 0xfdffd000-0xfdffd7ff]
[    0.192663] pci 0000:00:1f.2: PME# supported from D3hot
[    0.192718] pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500
[    0.192731] pci 0000:00:1f.3: reg 0x10: [mem 0xfdffc000-0xfdffc0ff 64bit]
[    0.192745] pci 0000:00:1f.3: reg 0x20: [io  0x0500-0x051f]
[    0.192833] pci 0000:01:00.0: [10de:0fc6] type 00 class 0x030000
[    0.192847] pci 0000:01:00.0: reg 0x10: [mem 0xfb000000-0xfbffffff]
[    0.192855] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.192863] pci 0000:01:00.0: reg 0x1c: [mem 0xee000000-0xefffffff 64bit pref]
[    0.192869] pci 0000:01:00.0: reg 0x24: [io  0xef00-0xef7f]
[    0.192874] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
[    0.192947] pci 0000:01:00.1: [10de:0e1b] type 00 class 0x040300
[    0.192959] pci 0000:01:00.1: reg 0x10: [mem 0xfcffc000-0xfcffffff]
[    0.193065] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.193066] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.193068] pci 0000:00:01.0:   bridge window [mem 0xfb000000-0xfcffffff]
[    0.193070] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xefffffff 64bit pref]
[    0.193097] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.193158] pci 0000:03:00.0: [197b:2368] type 00 class 0x010185
[    0.193193] pci 0000:03:00.0: reg 0x10: [io  0xdf00-0xdf07]
[    0.193204] pci 0000:03:00.0: reg 0x14: [io  0xde00-0xde03]
[    0.193215] pci 0000:03:00.0: reg 0x18: [io  0xdd00-0xdd07]
[    0.193226] pci 0000:03:00.0: reg 0x1c: [io  0xdc00-0xdc03]
[    0.193237] pci 0000:03:00.0: reg 0x20: [io  0xdb00-0xdb0f]
[    0.193345] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.193352] pci 0000:00:1c.4: PCI bridge to [bus 03]
[    0.193355] pci 0000:00:1c.4:   bridge window [io  0xd000-0xdfff]
[    0.193357] pci 0000:00:1c.4:   bridge window [mem 0xfde00000-0xfdefffff]
[    0.193399] pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
[    0.193422] pci 0000:04:00.0: reg 0x10: [io  0xce00-0xceff]
[    0.193444] pci 0000:04:00.0: reg 0x18: [mem 0xfdcff000-0xfdcfffff 64bit pref]
[    0.193458] pci 0000:04:00.0: reg 0x20: [mem 0xfdce0000-0xfdceffff 64bit pref]
[    0.193468] pci 0000:04:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    0.193534] pci 0000:04:00.0: supports D1 D2
[    0.193535] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.196020] pci 0000:00:1c.5: PCI bridge to [bus 04]
[    0.196022] pci 0000:00:1c.5:   bridge window [io  0xc000-0xcfff]
[    0.196025] pci 0000:00:1c.5:   bridge window [mem 0xfdd00000-0xfddfffff]
[    0.196028] pci 0000:00:1c.5:   bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
[    0.196078] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
[    0.196084] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.196085] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.196086] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.196087] pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[    0.196088] pci 0000:00:1e.0:   bridge window [mem 0xcff00000-0xfebfffff window] (subtractive decode)
[    0.196468] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[    0.196508] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
[    0.196546] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[    0.196585] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[    0.196623] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.196662] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[    0.196700] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 *14 15)
[    0.196739] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[    0.196873] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[    0.196873] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.196873] pci 0000:01:00.0: vgaarb: bridge control possible
[    0.196873] vgaarb: loaded
[    0.197068] SCSI subsystem initialized
[    0.197107] libata version 3.00 loaded.
[    0.197107] ACPI: bus type USB registered
[    0.197107] usbcore: registered new interface driver usbfs
[    0.197107] usbcore: registered new interface driver hub
[    0.197107] usbcore: registered new device driver usb
[    0.197107] EDAC MC: Ver: 3.0.0
[    0.197107] PCI: Using ACPI for IRQ routing
[    0.198374] PCI: pci_cache_line_size set to 64 bytes
[    0.198414] e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff]
[    0.198415] e820: reserve RAM buffer [mem 0xcfee0000-0xcfffffff]
[    0.198499] NetLabel: Initializing
[    0.198500] NetLabel:  domain hash size = 128
[    0.198501] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.198516] NetLabel:  unlabeled traffic allowed by default
[    0.198528] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[    0.198528] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.198528] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[    0.200024] clocksource: Switched to clocksource hpet
[    0.213538] VFS: Disk quotas dquot_6.6.0
[    0.213561] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.213660] pnp: PnP ACPI init
[    0.213820] system 00:00: [io  0x04d0-0x04d1] has been reserved
[    0.213821] system 00:00: [io  0x0290-0x029f] has been reserved
[    0.213825] system 00:00: [io  0x0800-0x087f] has been reserved
[    0.213826] system 00:00: [io  0x0290-0x0294] has been reserved
[    0.213827] system 00:00: [io  0x0880-0x088f] has been reserved
[    0.213831] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.213891] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.213979] pnp 00:02: [dma 2]
[    0.214000] pnp 00:02: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.214141] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.214274] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.214370] system 00:05: [io  0x0400-0x04cf] has been reserved
[    0.214371] system 00:05: [io  0x04d2-0x04ff] has been reserved
[    0.214373] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.214511] system 00:06: [mem 0xf4000000-0xf7ffffff] has been reserved
[    0.214513] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.214626] system 00:07: [mem 0x000d2a00-0x000d3fff] has been reserved
[    0.214628] system 00:07: [mem 0x000f0000-0x000f7fff] could not be reserved
[    0.214629] system 00:07: [mem 0x000f8000-0x000fbfff] could not be reserved
[    0.214630] system 00:07: [mem 0x000fc000-0x000fffff] could not be reserved
[    0.214631] system 00:07: [mem 0xcfee0000-0xcfefffff] could not be reserved
[    0.214633] system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.214634] system 00:07: [mem 0x00100000-0xcfedffff] could not be reserved
[    0.214635] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.214636] system 00:07: [mem 0xfed10000-0xfed1dfff] has been reserved
[    0.214637] system 00:07: [mem 0xfed20000-0xfed8ffff] has been reserved
[    0.214639] system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.214640] system 00:07: [mem 0xffb00000-0xffb7ffff] has been reserved
[    0.214641] system 00:07: [mem 0xfff00000-0xffffffff] has been reserved
[    0.214642] system 00:07: [mem 0x000e0000-0x000effff] has been reserved
[    0.214644] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.214648] pnp: PnP ACPI: found 8 devices
[    0.220639] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.220653] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
[    0.220655] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[    0.220656] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
[    0.220662] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[    0.220677] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf0000000-0xf01fffff]
[    0.220680] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf0200000-0xf03fffff 64bit pref]
[    0.220683] pci 0000:00:1c.4: BAR 15: assigned [mem 0xf0400000-0xf05fffff 64bit pref]
[    0.220684] pci 0000:00:1c.0: BAR 13: assigned [io  0x1000-0x1fff]
[    0.220687] pci 0000:01:00.0: BAR 6: assigned [mem 0xfc000000-0xfc07ffff pref]
[    0.220689] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.220690] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.220692] pci 0000:00:01.0:   bridge window [mem 0xfb000000-0xfcffffff]
[    0.220694] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xefffffff 64bit pref]
[    0.220696] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.220698] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
[    0.220701] pci 0000:00:1c.0:   bridge window [mem 0xf0000000-0xf01fffff]
[    0.220703] pci 0000:00:1c.0:   bridge window [mem 0xf0200000-0xf03fffff 64bit pref]
[    0.220706] pci 0000:00:1c.4: PCI bridge to [bus 03]
[    0.220708] pci 0000:00:1c.4:   bridge window [io  0xd000-0xdfff]
[    0.220711] pci 0000:00:1c.4:   bridge window [mem 0xfde00000-0xfdefffff]
[    0.220713] pci 0000:00:1c.4:   bridge window [mem 0xf0400000-0xf05fffff 64bit pref]
[    0.220717] pci 0000:04:00.0: BAR 6: assigned [mem 0xfdd00000-0xfdd0ffff pref]
[    0.220718] pci 0000:00:1c.5: PCI bridge to [bus 04]
[    0.220720] pci 0000:00:1c.5:   bridge window [io  0xc000-0xcfff]
[    0.220723] pci 0000:00:1c.5:   bridge window [mem 0xfdd00000-0xfddfffff]
[    0.220725] pci 0000:00:1c.5:   bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
[    0.220729] pci 0000:00:1e.0: PCI bridge to [bus 05]
[    0.220736] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.220737] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.220738] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.220739] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
[    0.220740] pci_bus 0000:00: resource 8 [mem 0xcff00000-0xfebfffff window]
[    0.220741] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.220742] pci_bus 0000:01: resource 1 [mem 0xfb000000-0xfcffffff]
[    0.220743] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xefffffff 64bit pref]
[    0.220744] pci_bus 0000:02: resource 0 [io  0x1000-0x1fff]
[    0.220745] pci_bus 0000:02: resource 1 [mem 0xf0000000-0xf01fffff]
[    0.220746] pci_bus 0000:02: resource 2 [mem 0xf0200000-0xf03fffff 64bit pref]
[    0.220747] pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
[    0.220748] pci_bus 0000:03: resource 1 [mem 0xfde00000-0xfdefffff]
[    0.220749] pci_bus 0000:03: resource 2 [mem 0xf0400000-0xf05fffff 64bit pref]
[    0.220750] pci_bus 0000:04: resource 0 [io  0xc000-0xcfff]
[    0.220751] pci_bus 0000:04: resource 1 [mem 0xfdd00000-0xfddfffff]
[    0.220752] pci_bus 0000:04: resource 2 [mem 0xfdc00000-0xfdcfffff 64bit pref]
[    0.220753] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7 window]
[    0.220754] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff window]
[    0.220755] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.220756] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff window]
[    0.220757] pci_bus 0000:05: resource 8 [mem 0xcff00000-0xfebfffff window]
[    0.220811] NET: Registered protocol family 2
[    0.220960] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.221165] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.221513] TCP: Hash tables configured (established 65536 bind 65536)
[    0.221558] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.221606] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.221677] NET: Registered protocol family 1
[    0.222501] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.222511] PCI: CLS 4 bytes, default 64
[    0.222554] Trying to unpack rootfs image as initramfs...
[    0.731679] Freeing initrd memory: 55472K
[    0.731685] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.731688] software IO TLB [mem 0xcbee0000-0xcfee0000] (64MB) mapped at [ffff8800cbee0000-ffff8800cfedffff]
[    0.731780] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3411d4b0238, max_idle_ns: 440795217497 ns
[    0.732122] audit: initializing netlink subsys (disabled)
[    0.732473] workingset: timestamp_bits=40 max_order=21 bucket_order=0
[    0.733618] zbud: loaded
[    0.733935] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.734061] fuse init (API version 7.26)
[    0.735453] Key type asymmetric registered
[    0.735454] Asymmetric key parser 'x509' registered
[    0.735486] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    0.735513] io scheduler noop registered
[    0.735514] io scheduler deadline registered
[    0.735536] io scheduler cfq registered (default)
[    0.735536] io scheduler mq-deadline registered
[    0.735537] io scheduler kyber registered
[    0.735558] io scheduler bfq registered
[    0.735804] pcieport 0000:00:1c.0: enabling device (0000 -> 0003)
[    0.736139] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
[    0.736140] vesafb: scrolling: redraw
[    0.736141] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.736160] vesafb: framebuffer at 0xef000000, mapped to 0xffffc90001800000, using 8128k, total 8128k
[    0.785466] Console: switching to colour frame buffer device 240x67
[    0.834448] fb0: VESA VGA frame buffer device
[    0.834457] intel_idle: does not run on family 6 model 23
[    0.834533] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.834541] ACPI: Power Button [PWRB]
[    0.834575] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.834587] ACPI: Power Button [PWRF]
[    0.834894] GHES: HEST is not enabled!
[    0.834963] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.855497] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.856646] Linux agpgart interface v0.103
[    0.858372] brd: module loaded
[    0.859522] loop: module loaded
[    0.859625] ahci 0000:00:1f.2: version 3.0
[    0.859744] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    0.859771] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[    0.859773] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems 
[    0.874380] scsi host0: ahci
[    0.874497] scsi host1: ahci
[    0.874609] scsi host2: ahci
[    0.874717] scsi host3: ahci
[    0.874829] scsi host4: ahci
[    0.874934] scsi host5: ahci
[    0.874996] ata1: SATA max UDMA/133 abar m2048@0xfdffd000 port 0xfdffd100 irq 24
[    0.874998] ata2: SATA max UDMA/133 abar m2048@0xfdffd000 port 0xfdffd180 irq 24
[    0.874999] ata3: SATA max UDMA/133 abar m2048@0xfdffd000 port 0xfdffd200 irq 24
[    0.875000] ata4: SATA max UDMA/133 abar m2048@0xfdffd000 port 0xfdffd280 irq 24
[    0.875007] ata5: SATA max UDMA/133 abar m2048@0xfdffd000 port 0xfdffd300 irq 24
[    0.875008] ata6: SATA max UDMA/133 abar m2048@0xfdffd000 port 0xfdffd380 irq 24
[    0.875107] libphy: Fixed MDIO Bus: probed
[    0.875108] tun: Universal TUN/TAP device driver, 1.6
[    0.875150] PPP generic driver version 2.4.2
[    0.875179] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.875181] ehci-pci: EHCI PCI platform driver
[    0.875269] ehci-pci 0000:00:1a.7: EHCI Host Controller
[    0.875274] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    0.879197] ehci-pci 0000:00:1a.7: cache line size of 4 is not supported
[    0.879205] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfdfff000
[    0.886012] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    0.886050] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.886051] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.886052] usb usb1: Product: EHCI Host Controller
[    0.886053] usb usb1: Manufacturer: Linux 4.13.16-nrj-desktop-1rosa-x86_64 ehci_hcd
[    0.886054] usb usb1: SerialNumber: 0000:00:1a.7
[    0.886134] hub 1-0:1.0: USB hub found
[    0.886141] hub 1-0:1.0: 6 ports detected
[    0.886302] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.886305] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.890213] ehci-pci 0000:00:1d.7: cache line size of 4 is not supported
[    0.890219] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfdffe000
[    0.897012] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.897045] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.897046] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.897047] usb usb2: Product: EHCI Host Controller
[    0.897048] usb usb2: Manufacturer: Linux 4.13.16-nrj-desktop-1rosa-x86_64 ehci_hcd
[    0.897049] usb usb2: SerialNumber: 0000:00:1d.7
[    0.897118] hub 2-0:1.0: USB hub found
[    0.897122] hub 2-0:1.0: 6 ports detected
[    0.897215] ehci-platform: EHCI generic platform driver
[    0.897222] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.897224] ohci-pci: OHCI PCI platform driver
[    0.897231] ohci-platform: OHCI generic platform driver
[    0.897236] uhci_hcd: USB Universal Host Controller Interface driver
[    0.897292] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    0.897295] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    0.897300] uhci_hcd 0000:00:1a.0: detected 2 ports
[    0.897320] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff00
[    0.897351] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    0.897352] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.897353] usb usb3: Product: UHCI Host Controller
[    0.897354] usb usb3: Manufacturer: Linux 4.13.16-nrj-desktop-1rosa-x86_64 uhci_hcd
[    0.897355] usb usb3: SerialNumber: 0000:00:1a.0
[    0.897419] hub 3-0:1.0: USB hub found
[    0.897423] hub 3-0:1.0: 2 ports detected
[    0.897533] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    0.897536] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    0.897541] uhci_hcd 0000:00:1a.1: detected 2 ports
[    0.897559] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fe00
[    0.897589] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    0.897590] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.897591] usb usb4: Product: UHCI Host Controller
[    0.897592] usb usb4: Manufacturer: Linux 4.13.16-nrj-desktop-1rosa-x86_64 uhci_hcd
[    0.897593] usb usb4: SerialNumber: 0000:00:1a.1
[    0.897660] hub 4-0:1.0: USB hub found
[    0.897664] hub 4-0:1.0: 2 ports detected
[    0.897765] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    0.897770] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[    0.897776] uhci_hcd 0000:00:1a.2: detected 2 ports
[    0.897790] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000fd00
[    0.897820] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    0.897821] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.897822] usb usb5: Product: UHCI Host Controller
[    0.897823] usb usb5: Manufacturer: Linux 4.13.16-nrj-desktop-1rosa-x86_64 uhci_hcd
[    0.897824] usb usb5: SerialNumber: 0000:00:1a.2
[    0.897889] hub 5-0:1.0: USB hub found
[    0.897893] hub 5-0:1.0: 2 ports detected
[    0.897993] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.897996] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[    0.898005] uhci_hcd 0000:00:1d.0: detected 2 ports
[    0.898019] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fc00
[    0.898052] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    0.898053] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.898054] usb usb6: Product: UHCI Host Controller
[    0.898055] usb usb6: Manufacturer: Linux 4.13.16-nrj-desktop-1rosa-x86_64 uhci_hcd
[    0.898056] usb usb6: SerialNumber: 0000:00:1d.0
[    0.898119] hub 6-0:1.0: USB hub found
[    0.898123] hub 6-0:1.0: 2 ports detected
[    0.898222] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.898225] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[    0.898230] uhci_hcd 0000:00:1d.1: detected 2 ports
[    0.898247] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fb00
[    0.898277] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    0.898278] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.898279] usb usb7: Product: UHCI Host Controller
[    0.898280] usb usb7: Manufacturer: Linux 4.13.16-nrj-desktop-1rosa-x86_64 uhci_hcd
[    0.898281] usb usb7: SerialNumber: 0000:00:1d.1
[    0.898344] hub 7-0:1.0: USB hub found
[    0.898348] hub 7-0:1.0: 2 ports detected
[    0.898451] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.898454] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[    0.898458] uhci_hcd 0000:00:1d.2: detected 2 ports
[    0.898473] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fa00
[    0.898506] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[    0.898508] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.898509] usb usb8: Product: UHCI Host Controller
[    0.898509] usb usb8: Manufacturer: Linux 4.13.16-nrj-desktop-1rosa-x86_64 uhci_hcd
[    0.898510] usb usb8: SerialNumber: 0000:00:1d.2
[    0.898575] hub 8-0:1.0: USB hub found
[    0.898578] hub 8-0:1.0: 2 ports detected
[    0.898666] i8042: PNP: No PS/2 controller found.
[    0.898666] i8042: Probing ports directly.
[    0.931261] i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
[    0.931262] i8042: If AUX port is really absent please use the 'i8042.noaux' option
[    1.181147] ata1: SATA link down (SStatus 0 SControl 300)
[    1.184085] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.184166] mousedev: PS/2 mouse device common for all mice
[    1.184297] rtc_cmos 00:01: RTC can wake from S4
[    1.184386] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    1.184405] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[    1.184409] i2c /dev entries driver
[    1.184449] device-mapper: uevent: version 1.0.3
[    1.184496] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[    1.184556] ledtrig-cpu: registered to indicate activity on CPUs
[    1.184578] vlv2_plat_clk vlv2_plat_clk: vlv2_plat_clk initialized
[    1.184769] NET: Registered protocol family 10
[    1.187857] Segment Routing with IPv6
[    1.187877] Key type dns_resolver registered
[    1.188088] microcode: sig=0x1067a, pf=0x40, revision=0xa0b
[    1.188146] microcode: Microcode Update Driver: v2.2.
[    1.188245] registered taskstats version 1
[    1.188270] zswap: loaded using pool lzo/zbud
[    1.188537] Btrfs loaded, crc32c=crc32c-generic
[    1.188550] Key type trusted registered
[    1.189566] Key type encrypted registered
[    1.189569] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    1.189808]   Magic number: 6:864:844
[    1.189960] rtc_cmos 00:01: setting system clock to 2018-02-04 17:49:06 UTC (1517766546)
[    1.190016] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.190017] EDD information not available.
[    1.190038] PM: Checking hibernation image partition UUID=fb779e20-2919-4c92-a13c-af5bcbe7848b
[    1.384011] usb 6-2: new full-speed USB device number 2 using uhci_hcd
[    1.485142] ata2: SATA link down (SStatus 0 SControl 300)
[    1.543029] usb 6-2: New USB device found, idVendor=054c, idProduct=0268
[    1.543030] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.543031] usb 6-2: Product: PLAYSTATION(R)3Conteroller
[    1.543032] usb 6-2: Manufacturer: SHENGHIC 2009/0708ZXW-V1Inc.
[    1.789139] ata3: SATA link down (SStatus 0 SControl 300)
[    2.216009] usb 8-1: new low-speed USB device number 2 using uhci_hcd
[    2.248014] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.249436] ata4.00: ATAPI: DRW-24D5MT, 1.00, max UDMA/133
[    2.250905] ata4.00: configured for UDMA/133
[    2.252888] scsi 3:0:0:0: CD-ROM            ASUS     DRW-24D5MT       1.00 PQ: 0 ANSI: 5
[    2.279852] sr 3:0:0:0: [sr0] scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.279853] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.279981] sr 3:0:0:0: Attached scsi CD-ROM sr0
[    2.280026] sr 3:0:0:0: Attached scsi generic sg0 type 5
[    2.378028] usb 8-1: New USB device found, idVendor=062a, idProduct=0201
[    2.378029] usb 8-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.378030] usb 8-1: Product: USB-compliant keyboard
[    2.744015] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.788412] ata5.00: HPA detected: current 488395055, native 488397168
[    2.788415] ata5.00: ATA-7: ST3250820AS, 3.AAE, max UDMA/133
[    2.788416] ata5.00: 488395055 sectors, multi 0: LBA48 NCQ (depth 31/32)
[    2.846717] ata5.00: configured for UDMA/133
[    2.846869] scsi 4:0:0:0: Direct-Access     ATA      ST3250820AS      E    PQ: 0 ANSI: 5
[    2.847012] sd 4:0:0:0: [sda] 488395055 512-byte logical blocks: (250 GB/233 GiB)
[    2.847019] sd 4:0:0:0: [sda] Write Protect is off
[    2.847020] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.847024] sd 4:0:0:0: Attached scsi generic sg1 type 0
[    2.847030] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.918261]  sda: sda1
[    2.918429] sd 4:0:0:0: [sda] Attached SCSI disk
[    3.172009] usb 8-2: new low-speed USB device number 3 using uhci_hcd
[    3.312014] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    3.313164] ata6.00: ATA-8: ST31000524AS, JC45, max UDMA/133
[    3.313166] ata6.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[    3.314543] ata6.00: configured for UDMA/133
[    3.314655] scsi 5:0:0:0: Direct-Access     ATA      ST31000524AS     JC45 PQ: 0 ANSI: 5
[    3.314758] sd 5:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    3.314763] sd 5:0:0:0: [sdb] Write Protect is off
[    3.314764] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    3.314766] sd 5:0:0:0: Attached scsi generic sg2 type 0
[    3.314772] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.330031] usb 8-2: New USB device found, idVendor=1bcf, idProduct=0005
[    3.330032] usb 8-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    3.330033] usb 8-2: Product: USB Optical Mouse
[    3.374804]  sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 sdb7 >
[    3.375151] sd 5:0:0:0: [sdb] Attached SCSI disk
[    3.375159] PM: Hibernation image not present or could not be loaded.
[    3.376679] Freeing unused kernel memory: 1580K
[    3.376680] Write protecting the kernel read-only data: 14336k
[    3.376986] Freeing unused kernel memory: 760K
[    3.377168] Freeing unused kernel memory: 80K
[    3.382317] systemd[1]: systemd 230 running in system mode. (+PAM +AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    3.382433] systemd[1]: Detected architecture x86-64.
[    3.382434] systemd[1]: Running in initial RAM disk.
[    3.382441] systemd[1]: No hostname configured.
[    3.382444] systemd[1]: Set hostname to <localhost>.
[    3.382458] systemd[1]: Initializing machine ID from random generator.
[    3.410359] systemd[1]: [/run/systemd/generator/dev-disk-by\x2duuid-26627f12\x2d1dcf\x2d4c14\x2d8aab\x2de54a6840b07e.device.d/timeout.conf:3] Unknown lvalue 'JobRunningTimeoutSec' in section 'Unit'
[    3.411235] systemd[1]: Created slice System Slice.
[    3.411290] systemd[1]: Listening on Journal Socket.
[    3.411641] systemd[1]: Starting Setup Virtual Console...
[    3.532748] RPC: Registered named UNIX socket transport module.
[    3.532750] RPC: Registered udp transport module.
[    3.532750] RPC: Registered tcp transport module.
[    3.532751] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    3.709173] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    3.709182] r8169 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control
[    3.709576] r8169 0000:04:00.0 eth0: RTL8168c/8111c at 0xffffc90000c9d000, 00:1f:d0:88:bb:e4, XID 1c4000c0 IRQ 25
[    3.709577] r8169 0000:04:00.0 eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
[    3.711164] hidraw: raw HID events driver (C) Jiri Kosina
[    3.712029] scsi host6: pata_jmicron
[    3.714051] scsi host7: pata_jmicron
[    3.714095] ata7: PATA max UDMA/100 cmd 0xdf00 ctl 0xde00 bmdma 0xdb00 irq 16
[    3.714096] ata8: PATA max UDMA/100 cmd 0xdd00 ctl 0xdc00 bmdma 0xdb08 irq 16
[    3.769043] r8169 0000:04:00.0 enp4s0: renamed from eth0
[    3.773249] usbcore: registered new interface driver usbhid
[    3.773250] usbhid: USB HID core driver
[    3.774263] input: USB-compliant keyboard as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/0003:062A:0201.0002/input/input3
[    3.784031] sony 0003:054C:0268.0001: can't set operational mode: step 3, ignoring
[    3.784065] input: SHENGHIC 2009/0708ZXW-V1Inc. PLAYSTATION(R)3Conteroller Motion Sensors as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/0003:054C:0268.0001/input/input5
[    3.826098] hid-generic 0003:062A:0201.0002: input,hidraw0: USB HID v1.10 Keyboard [USB-compliant keyboard] on usb-0000:00:1d.2-1/input0
[    3.826446] input: USB-compliant keyboard as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.1/0003:062A:0201.0003/input/input6
[    3.878050] input: SHENGHIC 2009/0708ZXW-V1Inc. PLAYSTATION(R)3Conteroller as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/0003:054C:0268.0001/input/input4
[    3.879162] hid-generic 0003:062A:0201.0003: input,hiddev0,hidraw1: USB HID v1.10 Mouse [USB-compliant keyboard] on usb-0000:00:1d.2-1/input1
[    3.879350] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/0003:1BCF:0005.0004/input/input7
[    3.879376] sony 0003:054C:0268.0001: input,hiddev1,hidraw2: USB HID v81.11 Joystick [SHENGHIC 2009/0708ZXW-V1Inc. PLAYSTATION(R)3Conteroller] on usb-0000:00:1d.0-2/input0
[    3.879529] hid-generic 0003:1BCF:0005.0004: input,hidraw3: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:1d.2-2/input0
[    3.964383] BTRFS: device label Reserve devid 1 transid 92065 /dev/sda1
[    4.175440] BTRFS: device label home devid 1 transid 403180 /dev/sdb5
[    4.182917] BTRFS: device label Rosa devid 1 transid 119537 /dev/sdb6
[   48.331045] random: crng init done
[   69.766065] perf: interrupt took too long (2505 > 2500), lowering kernel.perf_event_max_sample_rate to 79000
[   93.604665] kauditd_printk_skb: 4 callbacks suppressed
[   93.614807] BTRFS info (device sdb6): disk space caching is enabled
[   93.614808] BTRFS info (device sdb6): has skinny extents
[   94.093268] systemd-journald[173]: Received SIGTERM from PID 1 (systemd).
[   94.265428] systemd: 19 output lines suppressed due to ratelimiting
[   94.855484] ip_tables: (C) 2000-2006 Netfilter Core Team
[   95.006612] systemd-fstab-generator[599]: Ignoring "nofail" for root device
[   97.181151] BTRFS info (device sdb6): enabling auto defrag
[   97.181153] BTRFS info (device sdb6): use lzo compression
[   97.181155] BTRFS info (device sdb6): disk space caching is enabled
[   97.308037] vhba: loading out-of-tree module taints kernel.
[   97.308290] scsi host8: vhba
[   98.380102] systemd-journald[615]: Received request to flush runtime journal from PID 1
[   98.814428] kauditd_printk_skb: 47 callbacks suppressed
[   98.936590] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   99.102418] parport_pc 00:04: reported by Plug and Play ACPI
[   99.102479] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[   99.113768] ipmi message handler version 39.2
[   99.128167] ipmi device interface
[   99.185858] snd_hda_intel 0000:01:00.1: Disabling MSI
[   99.185865] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[   99.460916] nvidia: module license 'NVIDIA' taints kernel.
[   99.460918] Disabling lock debugging due to kernel taint
[   99.474762] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x000000000000042C-0x000000000000042D (\GP2C) (20170531/utaddress-247)
[   99.474769] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   99.474791] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   99.483504] snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC888: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[   99.483507] snd_hda_codec_realtek hdaudioC0D2:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   99.483508] snd_hda_codec_realtek hdaudioC0D2:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   99.483509] snd_hda_codec_realtek hdaudioC0D2:    mono: mono_out=0x0
[   99.483510] snd_hda_codec_realtek hdaudioC0D2:    dig-out=0x1e/0x0
[   99.483511] snd_hda_codec_realtek hdaudioC0D2:    inputs:
[   99.483513] snd_hda_codec_realtek hdaudioC0D2:      Rear Mic=0x18
[   99.483514] snd_hda_codec_realtek hdaudioC0D2:      Front Mic=0x19
[   99.483515] snd_hda_codec_realtek hdaudioC0D2:      Line=0x1a
[   99.483516] snd_hda_codec_realtek hdaudioC0D2:      CD=0x1c
[   99.483517] snd_hda_codec_realtek hdaudioC0D2:    dig-in=0x1f
[   99.491520] nvidia-nvlink: Nvlink Core is being initialized, major device number 244
[   99.491940] nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[   99.492407] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  390.12  Wed Dec 20 07:19:16 PST 2017 (using threaded interrupts)
[   99.508811] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   99.509586] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   99.509626] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   99.509663] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   99.509701] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   99.509739] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   99.509778] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[   99.509814] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[   99.617469] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
[   99.617518] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
[   99.617559] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input18
[   99.646393] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[   99.739430] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms  390.12  Wed Dec 20 06:13:53 PST 2017
[   99.792129] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[   99.792131] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 0
[   99.863543] intel_powerclamp: No package C-state available
[   99.871352] intel_powerclamp: No package C-state available
[  100.277496] ppdev: user-space parallel port driver
[  100.375887] gpio_ich: GPIO from 451 to 511 on gpio_ich
[  100.395018] iTCO_vendor_support: vendor-support=0
[  100.697488] Adding 6184956k swap on /dev/sdb7.  Priority:-1 extents:1 across:6184956k FS
[  100.707675] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[  100.707725] iTCO_wdt: Found a ICH10 TCO device (Version=2, TCOBASE=0x0460)
[  100.707830] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[  102.166493] BTRFS info (device sda1): enabling auto defrag
[  102.166497] BTRFS info (device sda1): use lzo compression
[  102.166499] BTRFS info (device sda1): disk space caching is enabled
[  102.166500] BTRFS info (device sda1): has skinny extents
[  102.250096] BTRFS info (device sdb5): enabling auto defrag
[  102.250099] BTRFS info (device sdb5): use lzo compression
[  102.250101] BTRFS info (device sdb5): disk space caching is enabled
[  102.250102] BTRFS info (device sdb5): has skinny extents
[  102.777357] Process accounting resumed
[  104.127397] kauditd_printk_skb: 1 callbacks suppressed
[  104.312943] it87: Found IT8718F chip at 0x290, revision 5
[  104.312952] it87: VID is disabled (pins used for GPIO)
[  104.312960] it87: Beeping is supported
[  107.362084] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[  107.368325] r8169 0000:04:00.0 enp4s0: link down
[  107.368329] r8169 0000:04:00.0 enp4s0: link down
[  107.368373] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[  109.511828] kauditd_printk_skb: 23 callbacks suppressed
[  111.947056] r8169 0000:04:00.0 enp4s0: link up
[  111.947067] IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready
[  112.029116] NET: Registered protocol family 17
[  112.534491] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[  112.618027] Netfilter messages via NETLINK v0.30.
[  112.619728] ctnetlink v0.93: registering with nfnetlink.
[  112.994448] nvidia-modeset: Allocated GPU:0 (GPU-81be9aea-1539-4caa-aaaf-06b37eb3ae77) @ PCI:0000:01:00.0
[  113.751600] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[  114.515681] kauditd_printk_skb: 102 callbacks suppressed
[  117.493220] zram: Added device: zram0
[  117.495840] zram: Added device: zram1
[  117.495933] zram: Added device: zram2
[  117.496199] zram: Added device: zram3
[  117.660385] zram0: detected capacity change from 0 to 690442240
[  117.751401] Adding 674256k swap on /dev/zram0.  Priority:100 extents:1 across:674256k SSFS
[  117.754400] zram1: detected capacity change from 0 to 690442240
[  117.759185] Adding 674256k swap on /dev/zram1.  Priority:100 extents:1 across:674256k SSFS
[  117.762424] zram2: detected capacity change from 0 to 690442240
[  117.767233] Adding 674256k swap on /dev/zram2.  Priority:100 extents:1 across:674256k SSFS
[  117.770416] zram3: detected capacity change from 0 to 690442240
[  117.775197] Adding 674256k swap on /dev/zram3.  Priority:100 extents:1 across:674256k SSFS
[  122.007517] kauditd_printk_skb: 35 callbacks suppressed
[  153.023248] Bluetooth: Core ver 2.22
[  153.023269] NET: Registered protocol family 31
[  153.023269] Bluetooth: HCI device and connection manager initialized
[  153.023273] Bluetooth: HCI socket layer initialized
[  153.023274] Bluetooth: L2CAP socket layer initialized
[  153.023280] Bluetooth: SCO socket layer initialized
[  153.362267] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[  153.362269] Bluetooth: BNEP filters: protocol multicast
[  153.362273] Bluetooth: BNEP socket layer initialized
[  212.568646] r8169 0000:04:00.0 enp4s0: link down
[  214.129252] r8169 0000:04:00.0 enp4s0: link up
[  244.483890] r8169 0000:04:00.0 enp4s0: link down
[  254.636814] r8169 0000:04:00.0 enp4s0: link up
[  656.926376] traps: atop[31011] trap divide error ip:407373 sp:7fff911868b8 error:0 in atop[400000+28000]
[  715.892768] kauditd_printk_skb: 7 callbacks suppressed
[  879.781073] perf: interrupt took too long (3136 > 3131), lowering kernel.perf_event_max_sample_rate to 63000
[  886.238605] kauditd_printk_skb: 2 callbacks suppressed
[  891.574714] kauditd_printk_skb: 91 callbacks suppressed
[  896.883949] kauditd_printk_skb: 8 callbacks suppressed
[  906.262558] kauditd_printk_skb: 10 callbacks suppressed
[  912.125686] kauditd_printk_skb: 25 callbacks suppressed
[  917.950715] kauditd_printk_skb: 26 callbacks suppressed
[  922.956385] kauditd_printk_skb: 4 callbacks suppressed
[  927.963256] kauditd_printk_skb: 13 callbacks suppressed
[  933.442728] kauditd_printk_skb: 57 callbacks suppressed
[  938.833539] kauditd_printk_skb: 34 callbacks suppressed
[  944.620352] kauditd_printk_skb: 38 callbacks suppressed
[  954.063532] kauditd_printk_skb: 20 callbacks suppressed
[  973.342909] kauditd_printk_skb: 5 callbacks suppressed
[  986.054849] kauditd_printk_skb: 3 callbacks suppressed
[ 1007.829875] kauditd_printk_skb: 21 callbacks suppressed
[ 1014.073904] kauditd_printk_skb: 6 callbacks suppressed
[ 1019.185343] kauditd_printk_skb: 7 callbacks suppressed
[ 1075.631954] kauditd_printk_skb: 15 callbacks suppressed
[ 1144.632792] kauditd_printk_skb: 11 callbacks suppressed
[ 1150.292573] kauditd_printk_skb: 2 callbacks suppressed
[ 1155.903415] kauditd_printk_skb: 10 callbacks suppressed
[ 1170.059273] kauditd_printk_skb: 4 callbacks suppressed
[ 1230.060638] kauditd_printk_skb: 2 callbacks suppressed
[ 1261.873604] kauditd_printk_skb: 4 callbacks suppressed
[ 1269.005215] kauditd_printk_skb: 4 callbacks suppressed
[ 1278.757226] kauditd_printk_skb: 67 callbacks suppressed
[ 1295.373643] kauditd_printk_skb: 3 callbacks suppressed
[ 1322.335392] perf: interrupt took too long (3926 > 3920), lowering kernel.perf_event_max_sample_rate to 50000
[ 1549.394989] st: Version 20160209, fixed bufsize 32768, s/g segs 256
[ 1551.347263] r8169 0000:04:00.0: invalid short VPD tag 00 at offset 1
[ 1605.648964] kauditd_printk_skb: 6 callbacks suppressed
[ 1613.004429] kauditd_printk_skb: 3 callbacks suppressed

Аватара пользователя
Pulfer
Сообщения: 3358
Зарегистрирован: 15 фев 2012, 01:57
Operating system: ROSA Desktop Fresh 2016.1 i586
Откуда: Vladivostok, Russia

Re: Долгая загрузка после обновления

Сообщение Pulfer » 05 фев 2018, 05:08

Похоже, пытается выйти из hibernation с отсутствующего диска (в fstab не видно строчки UUID=fb779e20-2919-4c92-a13c-af5bcbe7848b). Может винты в системе менялись в недавнее время?
Intel Core i7-6700 / 8 Gb RAM / GeForce GTX 750 Ti / Rosa 2016.1 i586

Аватара пользователя
Vochatrak
Сообщения: 805
Зарегистрирован: 22 сен 2014, 01:21
Operating system: Rosa fresh R5

Re: Долгая загрузка после обновления

Сообщение Vochatrak » 05 фев 2018, 05:13

Похоже, пытается выйти из hibernation с отсутствующего диска
Но я вообще не пользуюсь hibernation. И некогда не пользовался.
Даже если через poweroff тушу, эта надпись лезет.

Аватара пользователя
Pulfer
Сообщения: 3358
Зарегистрирован: 15 фев 2012, 01:57
Operating system: ROSA Desktop Fresh 2016.1 i586
Откуда: Vladivostok, Russia

Re: Долгая загрузка после обновления

Сообщение Pulfer » 05 фев 2018, 05:27

Проще всего, наверное, в параметрах загрузки (в grub) убрать кусок "resume=UUID=fb779e20-2919-4c92-a13c-af5bcbe7848b"
Intel Core i7-6700 / 8 Gb RAM / GeForce GTX 750 Ti / Rosa 2016.1 i586

banzay242
Сообщения: 904
Зарегистрирован: 18 авг 2017, 10:50
Operating system: MATE в релизе R10
Откуда: Уфа Омск

Re: Долгая загрузка после обновления

Сообщение banzay242 » 06 фев 2018, 12:12

sudo update-grub2

Аватара пользователя
Vochatrak
Сообщения: 805
Зарегистрирован: 22 сен 2014, 01:21
Operating system: Rosa fresh R5

Re: Долгая загрузка после обновления

Сообщение Vochatrak » 06 фев 2018, 21:12

Проще всего, наверное, в параметрах загрузки (в grub) убрать кусок "resume=UUID=fb779e20-2919-4c92-a13c-af5bcbe7848b"
Да, это помогло.

Ответить

Вернуться в «Обсуждение ROSA Fresh R9-R11.1 (платформа 2016.1)»