Grub2 stopped loading after bios update.

Ответить
Аватара пользователя
nitroflow
Сообщения: 18
Зарегистрирован: 02 окт 2013, 13:05
Operating system: Rosa Fresh 2014.1

Grub2 stopped loading after bios update.

Сообщение nitroflow » 24 май 2015, 22:04

I rebooted to update the bios of my motherboard(1.8 to 1.10) and after the update, grub2 stopped loading(only black screen with blinking cursor). I booted a recovery usb and chrooted to re-install grub2. The install gave an error so I ended up forcing it and that solved the problem but there must be a proper way to fix this if it happens again. As I can still reproduce the error I leave below a screen shot with the partition info and grub2-install error message.

Изображение
Intel G3420 i7 4790K / 2032 GB RAM / GeForce GTX 750 ti / Rosa 2014.1 Rosa 2016.1 x64

Аватара пользователя
CaptainFlint
Сообщения: 108
Зарегистрирован: 16 янв 2013, 20:18
Operating system: ROSA Desktop Fresh
Откуда: Moscow, Russia

Re: Grub2 stopped loading after bios update.

Сообщение CaptainFlint » 08 июл 2015, 14:12

It looks like your system was installed in UEFI mode, and for restoring you booted into Legacy BIOS mode, where Grub would try to install legacy bootloader (and fail, because GPT disks do not contain reserved space for it).
You need to boot in UEFI mode to correctly restore the bootloader.

P.S. Unfortunately, I cannot tell what caused grub2 malfunction in the first place. Maybe, updating bios deleted all EFI boot records, so the Grub2 is still there, but BIOS does not try to boot it.
Konstantin Vlasov, ROSA Developer

ShalokShalom
Сообщения: 85
Зарегистрирован: 03 дек 2014, 16:00
Operating system: ROSA

Re: Grub2 stopped loading after bios update.

Сообщение ShalokShalom » 10 июл 2015, 21:21

Offtopic: How to design your path in konsole/terminal like that, please ? :)

Аватара пользователя
nitroflow
Сообщения: 18
Зарегистрирован: 02 окт 2013, 13:05
Operating system: Rosa Fresh 2014.1

Re: Grub2 stopped loading after bios update.

Сообщение nitroflow » 12 окт 2015, 23:00

ShalokShalom писал(а):Offtopic: How to design your path in konsole/terminal like that, please ? :)
I'm using powerline shell
Intel G3420 i7 4790K / 2032 GB RAM / GeForce GTX 750 ti / Rosa 2014.1 Rosa 2016.1 x64

Ответить

Вернуться в «ROSA Fresh R4-R7 (2014.1)»