K3b ne veut pas graver un CD.
Voilà ce que ça me dit (cliquer sur l'icône ci-dessous):
Devices
-----------------------
TSSTcorp CDDVDW SH-S223F SB00 (/dev/sr0, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, DVD-R séquentiel, DVD-R double couche séquentiel, DVD+R double couche avec saut, DVD-RAM, DVD-RW à ré-inscription limitée, DVD-RW séquentiel, DVD+RW, DVD+R, DVD+R double couche, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Ré-inscription restreinte, Saut de couche] [%7]
K3b::IsoImager
-----------------------
mkisofs print size result: 208513 (427034624 bytes)
System
-----------------------
K3b Version: 17.8.2
KDE Version: 5.38.0
Qt Version: 5.9.4
Kernel: 4.9.76-nrj-desktop-1rosa-x86_64
Used versions
-----------------------
mkisofs: 3.2a07
cdrecord: 3.2a07
cdrecord
-----------------------
cdrecord: Opération non permise. Warning: Cannot raise RLIMIT_MEMLOCK limits.
cdrecord: Ne peut allouer de la mémoire. WARNING: Cannot do mlockall(2).
cdrecord: WARNING: This causes a high risk for buffer underruns.
cdrecord: Opération non permise. WARNING: Cannot set RR-scheduler.
cdrecord: Permission non accordée. WARNING: Cannot set priority using setpriority().
cdrecord: WARNING: This causes a high risk for buffer underruns.
cdrecord: Insufficient 'file read' privileges. You will not be able to open all needed devices.
cdrecord: Insufficient 'file write' privileges. You will not be able to open all needed devices.
cdrecord: Insufficient 'device' privileges. You may not be able to send all needed SCSI commands, this my cause various unexplainable problems.
cdrecord: Insufficient 'memlock' privileges. You may get buffer underruns.
cdrecord: Insufficient 'priocntl' privileges. You may get buffer underruns.
cdrecord: Insufficient 'network' privileges. You will not be able to do remote SCSI.
scsidev: '/dev/sr0'
devname: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
SCSI buffer size: 64512
cdrecord: Warning: Cannot read drive buffer.
cdrecord: Warning: The DMA speed test has been skipped.
Cdrecord-ProDVD-ProBD-Clone 3.02a07 (x86_64-unknown-linux-gnu) Copyright (C) 1995-2016 Joerg Schilling
TOC Type: 3 = CD-ROM XA mode 2
Using libscg version 'schily-0.9'.
Driveropts: 'burnfree'
atapi: 1
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'TSSTcorp'
Identifikation : 'CDDVDW SH-S223F '
Revision : 'SB00'
Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM.
Current: CD-R
Profile: DVD-R/DL sequential recording
Profile: DVD-R/DL layer jump recording
Profile: DVD-RW/DL
Profile: DVD+R/DL
Profile: DVD+R
Profile: DVD+RW
Profile: DVD-RW sequential recording
Profile: DVD-RW restricted overwrite
Profile: DVD-RAM
Profile: DVD-R sequential recording
Profile: DVD-ROM
Profile: CD-RW
Profile: CD-R (current)
Profile: CD-ROM
Profile: Removable Disk
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1962752 = 1916 KB
FIFO size : 4194304 = 4096 KB
cdrecord: Opération non permise. rezero unit: scsi sendcmd: fatal error
CDB: 01 00 00 00 00 00
cdrecord: Opération non permise. Cannot send SCSI cmd via ioctl.
cdrecord: Opération non permise. Cannot open or use SCSI driver.
cdrecord: For possible targets try 'cdrecord -scanbus'. Make sure you are root.
cdrecord: For possible transport specifiers try 'cdrecord dev=help'.
Track 01: data 407 MB
Total size: 467 MB (46:20.20) = 208515 sectors
Lout start: 468 MB (46:22/15) = 208515 sectors
cdrecord command:
-----------------------
/usr/bin/cdrecord -v gracetime=2 dev=/dev/sr0 speed=48 -tao driveropts=burnfree -multi -xa -tsize=208513s -
mkisofs
-----------------------
208513
mkisofs: Warning: Cannot add inode hints with -no-cache-inodes.
=== last message repeated 2 times. ===
Setting input-charset to 'UTF-8' from locale.
mkisofs calculate size command:
-----------------------
/usr/bin/mkisofs -gui -graft-points -print-size -quiet -volid Francis Cabrel -volset -appid K3B THE CD KREATOR (C) 1998-2017 SEBASTIAN TRUEG, MICHAL MALEK AND LESLIE ZHAI -publisher -preparer -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/k3b.KK9454 -rational-rock -hide-list /tmp/k3b.Tu9454 -joliet -joliet-long -hide-joliet-list /tmp/k3b.BE9454 -no-cache-inodes -full-iso9660-filenames -iso-level 3 -path-list /tmp/k3b.EF9454
mkisofs command:
-----------------------
/usr/bin/mkisofs -gui -graft-points -volid Francis Cabrel -volset -appid K3B THE CD KREATOR (C) 1998-2017 SEBASTIAN TRUEG, MICHAL MALEK AND LESLIE ZHAI -publisher -preparer -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/k3b.FR9454 -rational-rock -hide-list /tmp/k3b.Ob9454 -joliet -joliet-long -hide-joliet-list /tmp/k3b.oS9454 -no-cache-inodes -full-iso9660-filenames -iso-level 3 -path-list /tmp/k3b.Ei9454
Faut que je mette les fichiers sur un CD car je ne pourrai pas mettre une clé sur le matériel que je vais utiliser.