Код: Выделить всё
[ 0.000000] Linux version 4.9.18-nrj-desktop-1rosa-i586 (mockbuild@rosa2012.1-base) (gcc version 4.9.2 20140811 (ROSA) (Linaro GCC 4.9-2014.08) ) #1 SMP PREEMPT Sun Mar 26 21:57:13 UTC 2017
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000da9fefff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000da9ff000-0x00000000daa47fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000daa48000-0x00000000daa58fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000daa59000-0x00000000daa5bfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000daa5c000-0x00000000daa5efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000daa5f000-0x00000000daa69fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000daa6a000-0x00000000daab3fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000daab4000-0x00000000daab4fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000daab5000-0x00000000daab8fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000daab9000-0x00000000daac0fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000daac1000-0x00000000daae9fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000daaea000-0x00000000dab2cfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000dab2d000-0x00000000dadc1fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dadc2000-0x00000000daff6fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000daff7000-0x00000000daffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000db800000-0x00000000df9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011fdfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: N/A Kontron/PassauII, BIOS PSU2R105 12/20/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x11fe00 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 100000000 mask FE0000000 write-back
[ 0.000000] 2 base 0DB800000 mask FFF800000 uncachable
[ 0.000000] 3 base 0DC000000 mask FFC000000 uncachable
[ 0.000000] 4 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 5 base 11FE00000 mask FFFE00000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: update [mem 0xdb800000-0xffffffff] usable ==> reserved
[ 0.000000] found SMP MP-table at [mem 0x000fcb40-0x000fcb4f] mapped at [c00fcb40]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x013fffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] reserving inaccessible SNB gfx pages
[ 0.000000] BRK [0x00dea000, 0x00deafff] PGTABLE
[ 0.000000] BRK [0x00deb000, 0x00decfff] PGTABLE
[ 0.000000] BRK [0x00ded000, 0x00dedfff] PGTABLE
[ 0.000000] BRK [0x00dee000, 0x00deefff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x36848000-0x3741bfff]
[ 0.000000] Allocated new RAMDISK: [mem 0x32e2a000-0x339fde33]
[ 0.000000] Move RAMDISK from [mem 0x36848000-0x3741be33] to [mem 0x32e2a000-0x339fde33]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0450 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x00000000DAA5F070 00005C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000DAA68870 0000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000DAA5F158 009712 (v02 ALASKA A M I 00000016 INTL 20051117)
[ 0.000000] ACPI: FACS 0x00000000DAAB4F80 000040
[ 0.000000] ACPI: APIC 0x00000000DAA68968 000084 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x00000000DAA689F0 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000DAA68A30 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000DAA68A68 00090C (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 0x00000000DAA69378 000996 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: ASF! 0x00000000DAA69D10 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 3780MB HIGHMEM available.
[ 0.000000] 825MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 339fe000
[ 0.000000] low ram: 0 - 339fe000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] Normal [mem 0x0000000001000000-0x00000000339fdfff]
[ 0.000000] HighMem [mem 0x00000000339fe000-0x000000011fdfffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000001fffffff]
[ 0.000000] node 0: [mem 0x0000000020200000-0x000000003fffffff]
[ 0.000000] node 0: [mem 0x0000000040200000-0x00000000da9fefff]
[ 0.000000] node 0: [mem 0x00000000dab2d000-0x00000000dadc1fff]
[ 0.000000] node 0: [mem 0x00000000daff7000-0x00000000daffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000011fdfffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000011fdfffff]
[ 0.000000] On node 0 totalpages: 1025595
[ 0.000000] free_area_init_node: node 0, pgdat c0c379c0, node_mem_map f012a028
[ 0.000000] DMA zone: 40 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 2025 pages used for memmap
[ 0.000000] Normal zone: 206846 pages, LIFO batch:31
[ 0.000000] HighMem zone: 814751 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] Reserving Intel graphics memory at 0x00000000dba00000-0x00000000df9fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 20 pages/cpu @f00d6000 s52748 r0 d29172 u81920
[ 0.000000] pcpu-alloc: s52748 r0 d29172 u81920 alloc=20*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1023530
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.18-nrj-desktop-1rosa-i586 root=UUID=313b94fc-4389-44f3-b0ca-71d1ebd135a0 ro splash=silent logo.nologo quiet resume=UUID=33398486-4180-4dde-b63d-575002058053
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000339fe:0011fe00)
[ 0.000000] Initializing Movable for node 0 (00000000:00000000)
[ 0.000000] Memory: 4029192K/4102380K available (7583K kernel code, 862K rwdata, 3180K rodata, 824K init, 688K bss, 73188K reserved, 0K cma-reserved, 3259004K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
vmalloc : 0xf41fe000 - 0xff9fe000 ( 184 MB)
lowmem : 0xc0000000 - 0xf39fe000 ( 825 MB)
.init : 0xc0c5e000 - 0xc0d2c000 ( 824 kB)
.data : 0xc08682f4 - 0xc0c5cb00 (4050 kB)
.text : 0xc0100000 - 0xc08682f4 (7584 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=4
[ 0.000000] NR_IRQS:2304 nr_irqs:456 16
[ 0.000000] CPU 0 irqstacks, hard=efc3a000 soft=efc3c000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2095.317 MHz processor
[ 0.000030] Calibrating delay loop (skipped), value calculated using timer frequency.. 4190.63 BogoMIPS (lpj=2095317)
[ 0.000033] pid_max: default: 32768 minimum: 301
[ 0.000040] ACPI: Core revision 20160831
[ 0.007010] ACPI: 3 ACPI AML tables successfully acquired and loaded
[ 0.007031] Security Framework initialized
[ 0.007032] SELinux: Disabled at boot.
[ 0.007040] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.007041] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.007268] CPU: Physical Processor ID: 0
[ 0.007269] CPU: Processor Core ID: 0
[ 0.007274] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.007274] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.007276] mce: CPU supports 7 MCE banks
[ 0.007293] process: using mwait in idle threads
[ 0.007299] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.007300] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.008066] Freeing SMP alternatives memory: 28K (c0d2c000 - c0d33000)
[ 0.009078] ftrace: allocating 29768 entries in 59 pages
[ 0.025165] smpboot: Max logical packages: 2
[ 0.025172] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.025602] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.035610] TSC deadline timer enabled
[ 0.035614] smpboot: CPU0: Intel(R) Core(TM) i3-2310E CPU @ 2.10GHz (family: 0x6, model: 0x2a, stepping: 0x7)
[ 0.035619] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.035643] core: PEBS disabled due to CPU errata, please upgrade microcode
[ 0.035645] ... version: 3
[ 0.035646] ... bit width: 48
[ 0.035646] ... generic registers: 4
[ 0.035647] ... value mask: 0000ffffffffffff
[ 0.035648] ... max period: 00007fffffffffff
[ 0.035649] ... fixed-purpose events: 3
[ 0.035649] ... event mask: 000000070000000f
[ 0.052800] CPU 1 irqstacks, hard=efd72000 soft=efd74000
[ 0.052803] x86: Booting SMP configuration:
[ 0.052806] .... node #0, CPUs: #1
[ 0.053177] Initializing CPU#1
[ 0.121962] CPU 2 irqstacks, hard=efd8c000 soft=efd8e000
[ 0.121966] #2
[ 0.122354] Initializing CPU#2
[ 0.191183] CPU 3 irqstacks, hard=efdd2000 soft=efdd4000
[ 0.191187] #3
[ 0.191554] Initializing CPU#3
[ 0.253319] x86: Booted up 1 node, 4 CPUs
[ 0.253322] smpboot: Total of 4 processors activated (16784.57 BogoMIPS)
[ 0.257290] devtmpfs: initialized
[ 0.257627] PM: Registering ACPI NVS region [mem 0xda9ff000-0xdaa47fff] (299008 bytes)
[ 0.257634] PM: Registering ACPI NVS region [mem 0xdaa59000-0xdaa5bfff] (12288 bytes)
[ 0.257636] PM: Registering ACPI NVS region [mem 0xdaab4000-0xdaab4fff] (4096 bytes)
[ 0.257637] PM: Registering ACPI NVS region [mem 0xdaab9000-0xdaac0fff] (32768 bytes)
[ 0.257638] PM: Registering ACPI NVS region [mem 0xdaaea000-0xdab2cfff] (274432 bytes)
[ 0.257715] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.257719] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.257762] xor: automatically using best checksumming function avx
[ 0.257764] pinctrl core: initialized pinctrl subsystem
[ 0.257822] RTC time: 15:12:10, date: 05/16/17
[ 0.257923] NET: Registered protocol family 16
[ 0.263002] cpuidle: using governor ladder
[ 0.267023] cpuidle: using governor menu
[ 0.267188] ACPI: bus type PCI registered
[ 0.267191] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.267251] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.267253] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.267254] PCI: Using MMCONFIG for extended config space
[ 0.267255] PCI: Using configuration type 1 for base access
[ 0.267328] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.272250] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.289097] raid6: mmxx1 gen() 3519 MB/s
[ 0.306122] raid6: mmxx2 gen() 3750 MB/s
[ 0.323174] raid6: sse1x1 gen() 2957 MB/s
[ 0.340196] raid6: sse1x2 gen() 3652 MB/s
[ 0.357230] raid6: sse2x1 gen() 5726 MB/s
[ 0.374269] raid6: sse2x1 xor() 4617 MB/s
[ 0.391309] raid6: sse2x2 gen() 7386 MB/s
[ 0.408341] raid6: sse2x2 xor() 5113 MB/s
[ 0.408342] raid6: using algorithm sse2x2 gen() 7386 MB/s
[ 0.408343] raid6: .... xor() 5113 MB/s, rmw enabled
[ 0.408344] raid6: using ssse3x1 recovery algorithm
[ 0.408417] ACPI: Added _OSI(Module Device)
[ 0.408418] ACPI: Added _OSI(Processor Device)
[ 0.408420] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.408421] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.408633] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.414251] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.414695] ACPI: Dynamic OEM Table Load:
[ 0.414703] ACPI: SSDT 0x00000000EFF00000 000727 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.415125] ACPI: Dynamic OEM Table Load:
[ 0.415131] ACPI: SSDT 0x00000000EFF0CC00 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.415446] ACPI: Dynamic OEM Table Load:
[ 0.415451] ACPI: SSDT 0x00000000EFF18000 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.416487] ACPI: Interpreter enabled
[ 0.416511] ACPI: (supports S0 S3 S4 S5)
[ 0.416512] ACPI: Using IOAPIC for interrupt routing
[ 0.416548] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.425203] ACPI: Power Resource [FN00] (off)
[ 0.425314] ACPI: Power Resource [FN01] (off)
[ 0.425431] ACPI: Power Resource [FN02] (off)
[ 0.425540] ACPI: Power Resource [FN03] (off)
[ 0.425649] ACPI: Power Resource [FN04] (off)
[ 0.426403] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.426408] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.426957] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.427501] PCI host bridge to bus 0000:00
[ 0.427504] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.427506] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.427507] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.427509] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.427510] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.427512] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.427513] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.427515] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.427516] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.427518] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff window]
[ 0.427520] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.427528] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[ 0.427660] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[ 0.427702] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.427772] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.427819] pci 0000:00:01.1: [8086:0105] type 01 class 0x060400
[ 0.427858] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
[ 0.427926] pci 0000:00:01.1: System wakeup disabled by ACPI
[ 0.427972] pci 0000:00:01.2: [8086:0109] type 01 class 0x060400
[ 0.428010] pci 0000:00:01.2: PME# supported from D0 D3hot D3cold
[ 0.428077] pci 0000:00:01.2: System wakeup disabled by ACPI
[ 0.428129] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
[ 0.428140] pci 0000:00:02.0: reg 0x10: [mem 0xf6c00000-0xf6ffffff 64bit]
[ 0.428147] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.428152] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.428314] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[ 0.428337] pci 0000:00:16.0: reg 0x10: [mem 0xf7c0a000-0xf7c0a00f 64bit]
[ 0.428429] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.428563] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 0.428583] pci 0000:00:1a.0: reg 0x10: [mem 0xf7c07000-0xf7c073ff]
[ 0.428677] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.428764] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.428818] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 0.428837] pci 0000:00:1b.0: reg 0x10: [mem 0xf7c00000-0xf7c03fff 64bit]
[ 0.428921] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.428999] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.429051] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 0.429179] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.429262] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.429323] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 0.429344] pci 0000:00:1d.0: reg 0x10: [mem 0xf7c06000-0xf7c063ff]
[ 0.429446] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.429534] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.429586] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
[ 0.429803] pci 0000:00:1f.2: [8086:1c01] type 00 class 0x01018f
[ 0.429819] pci 0000:00:1f.2: reg 0x10: [io 0xf110-0xf117]
[ 0.429828] pci 0000:00:1f.2: reg 0x14: [io 0xf100-0xf103]
[ 0.429836] pci 0000:00:1f.2: reg 0x18: [io 0xf0f0-0xf0f7]
[ 0.429845] pci 0000:00:1f.2: reg 0x1c: [io 0xf0e0-0xf0e3]
[ 0.429854] pci 0000:00:1f.2: reg 0x20: [io 0xf0d0-0xf0df]
[ 0.429862] pci 0000:00:1f.2: reg 0x24: [io 0xf0c0-0xf0cf]
[ 0.430002] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 0.430020] pci 0000:00:1f.3: reg 0x10: [mem 0xf7c05000-0xf7c050ff 64bit]
[ 0.430043] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.430171] pci 0000:00:1f.5: [8086:1c09] type 00 class 0x010185
[ 0.430187] pci 0000:00:1f.5: reg 0x10: [io 0xf0b0-0xf0b7]
[ 0.430196] pci 0000:00:1f.5: reg 0x14: [io 0xf0a0-0xf0a3]
[ 0.430205] pci 0000:00:1f.5: reg 0x18: [io 0xf090-0xf097]
[ 0.430214] pci 0000:00:1f.5: reg 0x1c: [io 0xf080-0xf083]
[ 0.430223] pci 0000:00:1f.5: reg 0x20: [io 0xf070-0xf07f]
[ 0.430231] pci 0000:00:1f.5: reg 0x24: [io 0xf060-0xf06f]
[ 0.430434] pci 0000:01:00.0: [10b5:8112] type 01 class 0x060400
[ 0.430465] pci 0000:01:00.0: reg 0x10: [mem 0xf0a00000-0xf0a0ffff 64bit pref]
[ 0.430554] pci 0000:01:00.0: supports D1
[ 0.430556] pci 0000:01:00.0: PME# supported from D0 D1 D3hot
[ 0.430621] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.430631] pci 0000:00:01.0: PCI bridge to [bus 01-02]
[ 0.430637] pci 0000:00:01.0: bridge window [mem 0xf0a00000-0xf0afffff 64bit pref]
[ 0.430753] pci 0000:01:00.0: PCI bridge to [bus 02]
[ 0.430867] pci 0000:03:00.0: [8086:10d3] type 00 class 0x020000
[ 0.430892] pci 0000:03:00.0: reg 0x10: [mem 0xf7b00000-0xf7b1ffff]
[ 0.430921] pci 0000:03:00.0: reg 0x18: [io 0xe000-0xe01f]
[ 0.430937] pci 0000:03:00.0: reg 0x1c: [mem 0xf7b20000-0xf7b23fff]
[ 0.431066] pci 0000:03:00.0: PME# supported from D0 D3hot
[ 0.433468] pci 0000:00:01.1: PCI bridge to [bus 03]
[ 0.433475] pci 0000:00:01.1: bridge window [io 0xe000-0xefff]
[ 0.433482] pci 0000:00:01.1: bridge window [mem 0xf7b00000-0xf7bfffff]
[ 0.433600] pci 0000:04:00.0: [8086:10d3] type 00 class 0x020000
[ 0.433625] pci 0000:04:00.0: reg 0x10: [mem 0xf7a00000-0xf7a1ffff]
[ 0.433654] pci 0000:04:00.0: reg 0x18: [io 0xd000-0xd01f]
[ 0.433670] pci 0000:04:00.0: reg 0x1c: [mem 0xf7a20000-0xf7a23fff]
[ 0.433800] pci 0000:04:00.0: PME# supported from D0 D3hot
[ 0.436480] pci 0000:00:01.2: PCI bridge to [bus 04]
[ 0.436486] pci 0000:00:01.2: bridge window [io 0xd000-0xdfff]
[ 0.436492] pci 0000:00:01.2: bridge window [mem 0xf7a00000-0xf7afffff]
[ 0.436617] pci 0000:00:1c.0: PCI bridge to [bus 05]
[ 0.436622] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
[ 0.436628] pci 0000:00:1c.0: bridge window [mem 0xf7000000-0xf79fffff]
[ 0.436636] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf09fffff 64bit pref]
[ 0.436657] pci_bus 0000:00: on NUMA node 0
[ 0.437663] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.437733] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.437800] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.437866] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.437932] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.438000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.438067] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.438132] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.438417] ACPI: Enabled 8 GPEs in block 00 to 3F
[ 0.438542] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.438544] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.438547] vgaarb: loaded
[ 0.438548] vgaarb: bridge control possible 0000:00:02.0
[ 0.438796] SCSI subsystem initialized
[ 0.438844] libata version 3.00 loaded.
[ 0.438849] ACPI: bus type USB registered
[ 0.438870] usbcore: registered new interface driver usbfs
[ 0.438882] usbcore: registered new interface driver hub
[ 0.438903] usbcore: registered new device driver usb
[ 0.439018] PCI: Using ACPI for IRQ routing
[ 0.440641] PCI: pci_cache_line_size set to 64 bytes
[ 0.440768] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.440770] e820: reserve RAM buffer [mem 0xda9ff000-0xdbffffff]
[ 0.440773] e820: reserve RAM buffer [mem 0xdadc2000-0xdbffffff]
[ 0.440775] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff]
[ 0.440776] e820: reserve RAM buffer [mem 0x11fe00000-0x11fffffff]
[ 0.440901] NetLabel: Initializing
[ 0.440902] NetLabel: domain hash size = 128
[ 0.440903] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.440916] NetLabel: unlabeled traffic allowed by default
[ 0.441033] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.441041] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.443073] clocksource: Switched to clocksource hpet
[ 0.453669] VFS: Disk quotas dquot_6.6.0
[ 0.453689] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.453784] pnp: PnP ACPI init
[ 0.453893] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.453897] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.453998] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.454000] system 00:01: [io 0x1000-0x100f] has been reserved
[ 0.454002] system 00:01: [io 0x1100-0x1103] has been reserved
[ 0.454004] system 00:01: [io 0xffff] has been reserved
[ 0.454005] system 00:01: [io 0x0400-0x0453] has been reserved
[ 0.454007] system 00:01: [io 0x0458-0x047f] has been reserved
[ 0.454009] system 00:01: [io 0x0500-0x057f] has been reserved
[ 0.454012] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.454044] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.454123] system 00:03: [io 0x0454-0x0457] has been reserved
[ 0.454126] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.454220] system 00:04: [io 0x0290-0x0297] has been reserved
[ 0.454223] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.454355] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.454488] pnp 00:06: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[ 0.454709] pnp 00:07: [dma 0 disabled]
[ 0.454745] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.454959] pnp 00:08: [dma 0 disabled]
[ 0.454993] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.455207] pnp 00:09: [dma 0 disabled]
[ 0.455241] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.455444] pnp 00:0a: [dma 0 disabled]
[ 0.455479] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.455559] system 00:0b: [io 0x04d0-0x04d1] has been reserved
[ 0.455562] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.455838] system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.455840] system 00:0c: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.455842] system 00:0c: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.455844] system 00:0c: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.455846] system 00:0c: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.455848] system 00:0c: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.455850] system 00:0c: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.455852] system 00:0c: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.455854] system 00:0c: [mem 0xff000000-0xffffffff] has been reserved
[ 0.455856] system 00:0c: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.455858] system 00:0c: [mem 0xdfa00000-0xdfa00fff] has been reserved
[ 0.455860] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.456030] system 00:0d: [mem 0x20000000-0x201fffff] has been reserved
[ 0.456032] system 00:0d: [mem 0x40000000-0x401fffff] has been reserved
[ 0.456035] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.456054] pnp: PnP ACPI: found 14 devices
[ 0.456056] PnPBIOS: Disabled by ACPI PNP
[ 0.492935] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.492971] pci 0000:01:00.0: PCI bridge to [bus 02]
[ 0.492990] pci 0000:00:01.0: PCI bridge to [bus 01-02]
[ 0.492994] pci 0000:00:01.0: bridge window [mem 0xf0a00000-0xf0afffff 64bit pref]
[ 0.492998] pci 0000:00:01.1: PCI bridge to [bus 03]
[ 0.493000] pci 0000:00:01.1: bridge window [io 0xe000-0xefff]
[ 0.493003] pci 0000:00:01.1: bridge window [mem 0xf7b00000-0xf7bfffff]
[ 0.493007] pci 0000:00:01.2: PCI bridge to [bus 04]
[ 0.493009] pci 0000:00:01.2: bridge window [io 0xd000-0xdfff]
[ 0.493012] pci 0000:00:01.2: bridge window [mem 0xf7a00000-0xf7afffff]
[ 0.493017] pci 0000:00:1c.0: PCI bridge to [bus 05]
[ 0.493020] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
[ 0.493027] pci 0000:00:1c.0: bridge window [mem 0xf7000000-0xf79fffff]
[ 0.493032] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf09fffff 64bit pref]
[ 0.493042] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.493043] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.493045] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.493047] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[ 0.493048] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[ 0.493050] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[ 0.493051] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[ 0.493053] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
[ 0.493054] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
[ 0.493056] pci_bus 0000:00: resource 13 [mem 0xdfa00000-0xfeafffff window]
[ 0.493058] pci_bus 0000:01: resource 2 [mem 0xf0a00000-0xf0afffff 64bit pref]
[ 0.493059] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.493061] pci_bus 0000:03: resource 1 [mem 0xf7b00000-0xf7bfffff]
[ 0.493062] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
[ 0.493064] pci_bus 0000:04: resource 1 [mem 0xf7a00000-0xf7afffff]
[ 0.493065] pci_bus 0000:05: resource 0 [io 0xc000-0xcfff]
[ 0.493067] pci_bus 0000:05: resource 1 [mem 0xf7000000-0xf79fffff]
[ 0.493075] pci_bus 0000:05: resource 2 [mem 0xf0000000-0xf09fffff 64bit pref]
[ 0.493181] NET: Registered protocol family 2
[ 0.493346] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.493357] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.493372] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.493386] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.493391] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.493428] NET: Registered protocol family 1
[ 0.493446] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.527417] PCI: CLS 64 bytes, default 64
[ 0.527469] Trying to unpack rootfs image as initramfs...
[ 0.804707] Freeing initrd memory: 12112K (f2e2a000 - f39fe000)
[ 0.804712] sta2x11_mfd_init
[ 0.804894] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[ 0.804895] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 0.804896] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 0.804896] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[ 0.805050] apm: BIOS not found.
[ 0.805416] audit: initializing netlink subsys (disabled)
[ 0.805953] workingset: timestamp_bits=14 max_order=20 bucket_order=6
[ 0.808230] zbud: loaded
[ 0.810145] Key type asymmetric registered
[ 0.810158] bounce: pool size: 64 pages
[ 0.810201] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[ 0.810238] io scheduler noop registered
[ 0.810240] io scheduler deadline registered
[ 0.810310] io scheduler cfq registered
[ 0.810347] io scheduler bfq registered (default)
[ 0.810348] BFQ I/O-scheduler: v8r7 (with cgroups support)
[ 0.811309] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[ 0.811311] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 0.811314] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded
[ 0.811330] pcieport 0000:00:01.1: Signaling PME through PCIe PME interrupt
[ 0.811331] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 0.811334] pcie_pme 0000:00:01.1:pcie001: service driver pcie_pme loaded
[ 0.811348] pcieport 0000:00:01.2: Signaling PME through PCIe PME interrupt
[ 0.811350] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[ 0.811352] pcie_pme 0000:00:01.2:pcie001: service driver pcie_pme loaded
[ 0.811376] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.811381] pcie_pme 0000:00:1c.0:pcie001: service driver pcie_pme loaded
[ 0.811387] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.811401] pciehp 0000:00:1c.0:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[ 0.811438] pciehp 0000:00:1c.0:pcie004: service driver pciehp loaded
[ 0.811444] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.811496] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[ 0.811497] vesafb: scrolling: redraw
[ 0.811499] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.811508] pmd_set_huge: Cannot satisfy [mem 0xe0000000-0xe0200000] with a huge-page mapping due to MTRR override.
[ 0.811522] vesafb: framebuffer at 0xe0000000, mapped to 0xf4400000, using 3072k, total 3072k
[ 0.875704] Console: switching to colour frame buffer device 128x48
[ 0.939734] fb0: VESA VGA frame buffer device
[ 0.939752] intel_idle: MWAIT substates: 0x21120
[ 0.939753] intel_idle: v0.4.1 model 0x2A
[ 0.939976] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.940079] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.940082] ACPI: Power Button [PWRB]
[ 0.940132] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.940134] ACPI: Power Button [PWRF]
[ 0.940989] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.940990] ACPI: Thermal Zone [TZ00] (55 C)
[ 0.941297] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.941298] ACPI: Thermal Zone [TZ01] (55 C)
[ 0.941401] GHES: HEST is not enabled!
[ 0.941426] isapnp: Scanning for PnP cards...
[ 1.254462] isapnp: No Plug & Play device found
[ 1.254529] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.275228] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.295913] 00:08: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 1.316594] 00:09: ttyS2 at I/O 0x3e8 (irq = 7, base_baud = 115200) is a 16550A
[ 1.337273] 00:0a: ttyS3 at I/O 0x2e8 (irq = 5, base_baud = 115200) is a 16550A
[ 1.337573] Linux agpgart interface v0.103
[ 1.340949] brd: module loaded
[ 1.341227] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 1.343890] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.343932] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.344035] mousedev: PS/2 mouse device common for all mice
[ 1.344185] rtc_cmos 00:02: RTC can wake from S4
[ 1.344336] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.344363] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.344419] device-mapper: uevent: version 1.0.3
[ 1.344491] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[ 1.344499] intel_pstate: Intel P-state driver initializing
[ 1.344725] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.345030] Key type dns_resolver registered
[ 1.345738] microcode: sig=0x206a7, pf=0x10, revision=0x1b
[ 1.345883] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.345892] Using IPI No-Shortcut mode
[ 1.346274] registered taskstats version 1
[ 1.346324] zswap: loaded using pool lzo/zbud
[ 1.347393] Btrfs loaded, crc32c=crc32c-generic
[ 1.359723] Key type encrypted registered
[ 1.359729] ima: No TPM chip found, activating TPM-bypass!
[ 1.360471] Magic number: 1:953:234
[ 1.360631] rtc_cmos 00:02: setting system clock to 2017-05-16 15:12:11 UTC (1494947531)
[ 1.360634] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.360636] EDD information not available.
[ 1.360907] PM: Checking hibernation image partition UUID=33398486-4180-4dde-b63d-575002058053
[ 1.378243] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 1.411459] PM: Hibernation image not present or could not be loaded.
[ 1.412206] Freeing unused kernel memory: 824K (c0c5e000 - c0d2c000)
[ 1.412471] Write protecting the kernel text: 7588k
[ 1.412868] Write protecting the kernel read-only data: 3184k
[ 1.412870] NX-protecting the kernel data: 5724k
[ 1.420103] systemd[1]: Inserted module 'autofs4'
[ 1.428435] NET: Registered protocol family 10
[ 1.429289] systemd[1]: Inserted module 'ipv6'
[ 1.430395] random: systemd: uninitialized urandom read (16 bytes read)
[ 1.431111] random: systemd: uninitialized urandom read (16 bytes read)
[ 1.434627] systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 1.434972] systemd[1]: Detected architecture x86.
[ 1.434978] systemd[1]: Running in initial RAM disk.
[ 1.435025] systemd[1]: Set hostname to <Kontron-PC>.
[ 1.495288] random: systemd: uninitialized urandom read (16 bytes read)
[ 1.495354] random: systemd: uninitialized urandom read (16 bytes read)
[ 1.495469] random: systemd: uninitialized urandom read (16 bytes read)
[ 1.496629] random: systemd: uninitialized urandom read (16 bytes read)
[ 1.498013] random: systemd: uninitialized urandom read (16 bytes read)
[ 1.500115] random: systemd: uninitialized urandom read (16 bytes read)
[ 1.500131] random: systemd: uninitialized urandom read (16 bytes read)
[ 1.500520] random: systemd: uninitialized urandom read (16 bytes read)
[ 1.503699] systemd[1]: Reached target Timers.
[ 1.503714] systemd[1]: Starting Timers.
[ 1.504173] systemd[1]: Created slice -.slice.
[ 1.504188] systemd[1]: Starting -.slice.
[ 1.504302] systemd[1]: Created slice System Slice.
[ 1.504317] systemd[1]: Starting System Slice.
[ 1.776241] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.777054] [drm] Initialized
[ 1.777090] ehci-pci: EHCI PCI platform driver
[ 1.778221] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.778233] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.778251] ehci-pci 0000:00:1a.0: debug port 2
[ 1.782175] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.782202] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7c07000
[ 1.789101] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.789194] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.789197] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.789200] usb usb1: Product: EHCI Host Controller
[ 1.789202] usb usb1: Manufacturer: Linux 4.9.18-nrj-desktop-1rosa-i586 ehci_hcd
[ 1.789204] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.789441] hub 1-0:1.0: USB hub found
[ 1.789455] hub 1-0:1.0: 2 ports detected
[ 1.789905] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.789915] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.789932] ehci-pci 0000:00:1d.0: debug port 2
[ 1.793830] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.793855] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7c06000
[ 1.800077] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.800165] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.800169] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.800171] usb usb2: Product: EHCI Host Controller
[ 1.800174] usb usb2: Manufacturer: Linux 4.9.18-nrj-desktop-1rosa-i586 ehci_hcd
[ 1.800176] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.800368] hub 2-0:1.0: USB hub found
[ 1.800376] hub 2-0:1.0: 2 ports detected
[ 1.800542] ata_piix 0000:00:1f.2: version 2.13
[ 1.800753] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 1.837056] tsc: Refined TSC clocksource calibration: 2095.240 MHz
[ 1.837065] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1e339fecabe, max_idle_ns: 440795202126 ns
[ 1.957085] ata_piix 0000:00:1f.2: SCR access via SIDPR is available but doesn't work
[ 1.957665] scsi host0: ata_piix
[ 1.957859] scsi host1: ata_piix
[ 1.957950] ata1: SATA max UDMA/133 cmd 0xf110 ctl 0xf100 bmdma 0xf0d0 irq 19
[ 1.957952] ata2: SATA max UDMA/133 cmd 0xf0f0 ctl 0xf0e0 bmdma 0xf0d8 irq 19
[ 1.958206] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 2.101047] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 2.109041] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 2.117047] ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
[ 2.128515] scsi host2: ata_piix
[ 2.128707] scsi host3: ata_piix
[ 2.128778] ata3: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf070 irq 19
[ 2.128779] ata4: SATA max UDMA/133 cmd 0xf090 ctl 0xf080 bmdma 0xf078 irq 19
[ 2.129409] [drm] Memory usable by graphics device = 2048M
[ 2.129411] checking generic (e0000000 300000) vs hw (e0000000 10000000)
[ 2.129412] fb: switching to inteldrmfb from VESA VGA
[ 2.131161] ata2.00: ATA-8: HGST HTE725050A7E630, GH2OA510, max UDMA/133
[ 2.131163] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.136002] ata2.00: configured for UDMA/133
[ 2.136262] scsi 1:0:0:0: Direct-Access ATA HGST HTE725050A7 A510 PQ: 0 ANSI: 5
[ 2.154331] sd 1:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 2.154333] sd 1:0:0:0: [sda] 4096-byte physical blocks
[ 2.154445] sd 1:0:0:0: [sda] Write Protect is off
[ 2.154447] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.154491] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.203920] Console: switching to colour dummy device 80x25
[ 2.204964] [drm] Replacing VGA console driver
[ 2.210195] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.210198] [drm] Driver supports precise vblank timestamp query.
[ 2.213287] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 2.219591] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 2.219597] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.219889] hub 1-1:1.0: USB hub found
[ 2.219974] hub 1-1:1.0: 6 ports detected
[ 2.224764] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 2.225210] sda: sda1 sda2 < sda5 sda6 >
[ 2.225489] acpi device:45: registered as cooling_device9
[ 2.225640] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
[ 2.225832] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0
[ 2.225950] sd 1:0:0:0: [sda] Attached SCSI disk
[ 2.229688] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 2.229690] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.230047] hub 2-1:1.0: USB hub found
[ 2.230104] hub 2-1:1.0: 6 ports detected
[ 2.318606] random: fast init done
[ 2.342516] fbcon: inteldrmfb (fb0) is primary device
[ 2.501097] usb 2-1.2: new low-speed USB device number 3 using ehci-pci
[ 2.512532] Console: switching to colour frame buffer device 128x48
[ 2.584588] usb 2-1.2: New USB device found, idVendor=046d, idProduct=c05b
[ 2.584591] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.584593] usb 2-1.2: Product: USB Optical Mouse
[ 2.584595] usb 2-1.2: Manufacturer: Logitech
[ 2.586575] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.588744] Uniform Multi-Platform E-IDE driver
[ 2.589229] usbcore: registered new interface driver usbhid
[ 2.589229] usbhid: USB HID core driver
[ 2.590538] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:046D:C05B.0001/input/input6
[ 2.590689] hid-generic 0003:046D:C05B.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1.2/input0
[ 2.637954] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 2.845083] clocksource: Switched to clocksource tsc
[ 2.998824] PM: Starting manual resume from disk
[ 2.998828] PM: Hibernation image partition 8:1 present
[ 2.998829] PM: Looking for hibernation image.
[ 3.002867] PM: Image not found (code -22)
[ 3.002869] PM: Hibernation image not present or could not be loaded.
[ 3.789435] random: crng init done
[ 3.916267] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 4.214353] systemd-journald[156]: Received SIGTERM from PID 1 (systemd).
[ 4.473516] systemd: 33 output lines suppressed due to ratelimiting
[ 4.792845] systemd[1]: RTC configured in localtime, applying delta of 360 minutes to system time.
[ 4.987919] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 4.987979] systemd[1]: Inserted module 'ip_tables'
[ 5.743242] systemd-sysv-generator[487]: Overwriting existing symlink /run/systemd/generator.late/wlan.service with real service
[ 5.743335] systemd-sysv-generator[487]: Overwriting existing symlink /run/systemd/generator.late/xinetd.service with real service
[ 5.743505] systemd-sysv-generator[487]: Overwriting existing symlink /run/systemd/generator.late/mandrake_everytime.service with real service
[ 5.743568] systemd-sysv-generator[487]: Overwriting existing symlink /run/systemd/generator.late/pptp.service with real service
[ 5.743632] systemd-sysv-generator[487]: Overwriting existing symlink /run/systemd/generator.late/apmd.service with real service
[ 5.743752] systemd-sysv-generator[487]: Overwriting existing symlink /run/systemd/generator.late/pppoe.service with real service
[ 5.743814] systemd-sysv-generator[487]: Overwriting existing symlink /run/systemd/generator.late/mandi.service with real service
[ 5.743965] systemd-sysv-generator[487]: Overwriting existing symlink /run/systemd/generator.late/preload.service with real service
[ 5.744044] systemd-sysv-generator[487]: Overwriting existing symlink /run/systemd/generator.late/mandrake_firstime.service with real service
[ 5.744102] systemd-sysv-generator[487]: Overwriting existing symlink /run/systemd/generator.late/network.service with real service
[ 5.744489] systemd-sysv-ge: 2 output lines suppressed due to ratelimiting
[ 6.020768] audit_printk_skb: 117 callbacks suppressed
[ 7.056528] EXT4-fs (sda5): re-mounted. Opts: acl
[ 7.557927] systemd-journald[498]: Received request to flush runtime journal from PID 1
[ 7.935337] systemd-journald[498]: File /var/log/journal/ac231a66b4a486e77a4680955790fafa/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 9.076992] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20160831/utaddress-247)
[ 9.077001] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 9.077004] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160831/utaddress-247)
[ 9.077008] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 9.077009] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160831/utaddress-247)
[ 9.077013] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 9.077014] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160831/utaddress-247)
[ 9.077018] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 9.077019] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 9.087961] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 9.100894] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 9.242231] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
[ 9.308205] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC262: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:hp
[ 9.308209] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 9.308212] snd_hda_codec_realtek hdaudioC0D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 9.308214] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 9.308215] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 9.308218] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 9.308220] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 9.317182] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 9.626942] pps_core: LinuxPPS API ver. 1 registered
[ 9.626945] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 9.629314] PTP clock support registered
[ 9.662280] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 9.662283] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 9.662380] e1000e 0000:03:00.0: Disabling ASPM L0s L1
[ 9.662593] e1000e 0000:03:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 9.714199] e1000e 0000:03:00.0 0000:03:00.0 (uninitialized): registered PHC clock
[ 9.768378] e1000e 0000:03:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:25:a8:01:34:2d
[ 9.768391] e1000e 0000:03:00.0 eth0: Intel(R) PRO/1000 Network Connection
[ 9.768459] e1000e 0000:03:00.0 eth0: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
[ 9.768550] e1000e 0000:04:00.0: Disabling ASPM L0s L1
[ 9.769627] e1000e 0000:04:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 9.823791] e1000e 0000:04:00.0 0000:04:00.0 (uninitialized): registered PHC clock
[ 9.879942] e1000e 0000:04:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 00:25:a8:01:34:2c
[ 9.879945] e1000e 0000:04:00.0 eth1: Intel(R) PRO/1000 Network Connection
[ 9.880012] e1000e 0000:04:00.0 eth1: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
[ 10.399156] Adding 9497596k swap on /dev/sda1. Priority:-1 extents:1 across:9497596k FS
[ 10.570441] intel_rapl: Found RAPL domain package
[ 10.570446] intel_rapl: Found RAPL domain core
[ 10.570448] intel_rapl: Found RAPL domain uncore
[ 10.570455] intel_rapl: RAPL package 0 domain package locked by BIOS
[ 10.944330] iTCO_vendor_support: vendor-support=0
[ 11.025705] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 11.025756] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[ 11.026144] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1)
[ 11.286315] e1000e 0000:04:00.0 enp4s0: renamed from eth1
[ 11.301936] e1000e 0000:03:00.0 enp3s0: renamed from eth0
[ 11.375641] audit_printk_skb: 36 callbacks suppressed
[ 17.882322] audit_printk_skb: 9 callbacks suppressed
[ 18.522589] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[ 18.600530] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 22.765581] e1000e: enp3s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[ 22.765898] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
[ 22.819268] NET: Registered protocol family 17
[ 23.036421] audit_printk_skb: 66 callbacks suppressed
[ 27.527805] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[ 28.742282] audit_printk_skb: 6 callbacks suppressed
[ 36.231068] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: acl
[ 37.213491] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 37.904977] Netfilter messages via NETLINK v0.30.
[ 37.909257] ctnetlink v0.93: registering with nfnetlink.
[ 40.510583] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 41.229545] audit_printk_skb: 327 callbacks suppressed
[ 47.383983] fuse init (API version 7.26)
[ 52.495532] audit_printk_skb: 66 callbacks suppressed
[ 52.638058] Bluetooth: Core ver 2.22
[ 52.638083] NET: Registered protocol family 31
[ 52.638084] Bluetooth: HCI device and connection manager initialized
[ 52.638089] Bluetooth: HCI socket layer initialized
[ 52.638093] Bluetooth: L2CAP socket layer initialized
[ 52.638101] Bluetooth: SCO socket layer initialized
[ 52.775764] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 52.775769] Bluetooth: BNEP filters: protocol multicast
[ 52.775777] Bluetooth: BNEP socket layer initialized
[ 165.435022] atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly.
[ 165.646191] atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly.
[ 165.867759] atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly.
[ 167.409708] atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly.
[ 167.774779] atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly.
[ 167.986268] atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly.
[ 168.205121] atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly.
[ 168.426448] atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly.
[ 168.637779] atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly.
[ 221.862104] usb 2-1.1: new high-speed USB device number 4 using ehci-pci
[ 221.941755] usb 2-1.1: New USB device found, idVendor=0781, idProduct=5567
[ 221.941763] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 221.941767] usb 2-1.1: Product: Cruzer Blade
[ 221.941770] usb 2-1.1: Manufacturer: SanDisk
[ 221.941773] usb 2-1.1: SerialNumber: 4C530101070131006113
[ 222.065385] usb-storage 2-1.1:1.0: USB Mass Storage device detected
[ 222.065570] scsi host4: usb-storage 2-1.1:1.0
[ 222.065730] usbcore: registered new interface driver usb-storage
[ 222.070048] usbcore: registered new interface driver uas
[ 223.078777] scsi 4:0:0:0: Direct-Access SanDisk Cruzer Blade 1.26 PQ: 0 ANSI: 6
[ 223.081037] sd 4:0:0:0: [sdb] 7821312 512-byte logical blocks: (4.00 GB/3.73 GiB)
[ 223.082407] sd 4:0:0:0: [sdb] Write Protect is off
[ 223.082418] sd 4:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 223.083543] sd 4:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 223.102048] sdb: sdb1
[ 223.105922] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 223.404522] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 470.306388] sdb: detected capacity change from 4004511744 to 0
[ 477.678938] usb 2-1.1: USB disconnect, device number 4
[ 1567.978024] atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly.
[ 1568.189516] atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly.
[ 1573.982558] atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly.
[ 2263.373177] usb 2-1.1: new high-speed USB device number 5 using ehci-pci
[ 2263.451993] usb 2-1.1: New USB device found, idVendor=0781, idProduct=5567
[ 2263.451999] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2263.452003] usb 2-1.1: Product: Cruzer Blade
[ 2263.452007] usb 2-1.1: Manufacturer: SanDisk
[ 2263.452029] usb 2-1.1: SerialNumber: 4C530101070131006113
[ 2263.452593] usb-storage 2-1.1:1.0: USB Mass Storage device detected
[ 2263.455098] scsi host4: usb-storage 2-1.1:1.0
[ 2264.475509] scsi 4:0:0:0: Direct-Access SanDisk Cruzer Blade 1.26 PQ: 0 ANSI: 6
[ 2264.477855] sd 4:0:0:0: [sdb] 7821312 512-byte logical blocks: (4.00 GB/3.73 GiB)
[ 2264.479845] sd 4:0:0:0: [sdb] Write Protect is off
[ 2264.479856] sd 4:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 2264.480965] sd 4:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 2264.498778] sdb: sdb1
[ 2264.502213] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 2264.755061] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 2566.096804] sdb: detected capacity change from 4004511744 to 0
[ 2575.763381] usb 2-1.1: USB disconnect, device number 5
[ 2787.637942] usb 2-1.1: new high-speed USB device number 6 using ehci-pci
[ 2787.725103] usb 2-1.1: New USB device found, idVendor=8564, idProduct=1000
[ 2787.725111] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2787.725116] usb 2-1.1: Product: Mass Storage Device
[ 2787.725119] usb 2-1.1: Manufacturer: JetFlash
[ 2787.725123] usb 2-1.1: SerialNumber: WL4RORNC
[ 2787.725733] usb-storage 2-1.1:1.0: USB Mass Storage device detected
[ 2787.728155] scsi host4: usb-storage 2-1.1:1.0
[ 2788.745431] scsi 4:0:0:0: Direct-Access JetFlash Transcend 8GB 8.07 PQ: 0 ANSI: 4
[ 2788.747025] sd 4:0:0:0: [sdb] 15679488 512-byte logical blocks: (8.03 GB/7.48 GiB)
[ 2788.748277] sd 4:0:0:0: [sdb] Write Protect is off
[ 2788.748283] sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 2788.749503] sd 4:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 2788.754757] sdb: sdb1
[ 2788.758108] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 2789.016705] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 2852.706565] sdb: detected capacity change from 8027897856 to 0
[ 2861.447094] usb 2-1.1: USB disconnect, device number 6
[ 3227.498541] audit_printk_skb: 6 callbacks suppressed
[ 6613.823031] audit_printk_skb: 6 callbacks suppressed
[ 6614.415384] usb 2-1.1: new high-speed USB device number 7 using ehci-pci
[ 6614.502668] usb 2-1.1: New USB device found, idVendor=8564, idProduct=1000
[ 6614.502673] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6614.502677] usb 2-1.1: Product: Mass Storage Device
[ 6614.502679] usb 2-1.1: Manufacturer: JetFlash
[ 6614.502681] usb 2-1.1: SerialNumber: WL4RORNC
[ 6614.503264] usb-storage 2-1.1:1.0: USB Mass Storage device detected
[ 6614.505673] scsi host4: usb-storage 2-1.1:1.0
[ 6615.548554] scsi 4:0:0:0: Direct-Access JetFlash Transcend 8GB 8.07 PQ: 0 ANSI: 4
[ 6615.550148] sd 4:0:0:0: [sdb] 15679488 512-byte logical blocks: (8.03 GB/7.48 GiB)
[ 6615.551333] sd 4:0:0:0: [sdb] Write Protect is off
[ 6615.551337] sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 6615.552607] sd 4:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 6615.558038] sdb: sdb1
[ 6615.561649] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 6615.782171] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 6817.754705] usb 2-1.1: USB disconnect, device number 7
[ 7889.240859] c7term[17554]: segfault at 0 ip b1c479d6 sp bfcc5aa0 error 4 in libmonitor.so[b1b59000+3a9000]
[11162.890917] audit_printk_skb: 3 callbacks suppressed
[17331.190238] audit_printk_skb: 6 callbacks suppressed
[20930.206624] audit_printk_skb: 6 callbacks suppressed
[21962.217402] audit_printk_skb: 6 callbacks suppressed
[28130.269371] audit_printk_skb: 6 callbacks suppressed
[31730.274588] audit_printk_skb: 3 callbacks suppressed
[32761.820792] audit_printk_skb: 6 callbacks suppressed
[38929.561941] audit_printk_skb: 6 callbacks suppressed
[42529.616015] audit_printk_skb: 6 callbacks suppressed
[43561.427931] audit_printk_skb: 6 callbacks suppressed
[46189.808000] audit_printk_skb: 6 callbacks suppressed
[53329.226381] audit_printk_skb: 3 callbacks suppressed
[54361.053006] audit_printk_skb: 6 callbacks suppressed
[60529.634057] audit_printk_skb: 6 callbacks suppressed
[64128.659740] audit_printk_skb: 6 callbacks suppressed
[64995.847716] audit_printk_skb: 6 callbacks suppressed
[68697.776883] audit_printk_skb: 6 callbacks suppressed
[71346.050066] audit_printk_skb: 9 callbacks suppressed
[72035.950061] usb 2-1.1: new high-speed USB device number 8 using ehci-pci
[72036.036526] usb 2-1.1: New USB device found, idVendor=8564, idProduct=1000
[72036.036544] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[72036.036549] usb 2-1.1: Product: Mass Storage Device
[72036.036551] usb 2-1.1: Manufacturer: JetFlash
[72036.036554] usb 2-1.1: SerialNumber: WL4RORNC
[72036.037155] usb-storage 2-1.1:1.0: USB Mass Storage device detected
[72036.037424] scsi host4: usb-storage 2-1.1:1.0
[72037.083504] scsi 4:0:0:0: Direct-Access JetFlash Transcend 8GB 8.07 PQ: 0 ANSI: 4
[72037.085223] sd 4:0:0:0: [sdb] 15679488 512-byte logical blocks: (8.03 GB/7.48 GiB)
[72037.086350] sd 4:0:0:0: [sdb] Write Protect is off
[72037.086364] sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00
[72037.087478] sd 4:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[72037.093116] sdb: sdb1
[72037.097607] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[72037.311365] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
Код: Выделить всё
[ 20.035]
X.Org X Server 1.17.4
Release Date: 2015-10-28
[ 20.035] X Protocol Version 11, Revision 0
[ 20.035] Build Operating System: Linux_3.11.0-9-generic mandriva
[ 20.035] Current Operating System: Linux Kontron-PC 4.9.18-nrj-desktop-1rosa-i586 #1 SMP PREEMPT Sun Mar 26 21:57:13 UTC 2017 i686
[ 20.035] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.18-nrj-desktop-1rosa-i586 root=UUID=313b94fc-4389-44f3-b0ca-71d1ebd135a0 ro splash=silent logo.nologo quiet resume=UUID=33398486-4180-4dde-b63d-575002058053
[ 20.036] Build Date: 22 December 2015 08:28:14AM
[ 20.036]
[ 20.036] Current version of pixman: 0.32.8
[ 20.036] Before reporting problems, check http://bugs.rosalinux.ru/
to make sure that you have the latest version.
[ 20.036] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 20.036] (==) Log file: "/var/log/Xorg.0.log", Time: Tue May 16 15:12:30 2017
[ 20.100] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 20.100] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 20.137] (==) No Layout section. Using the first Screen section.
[ 20.137] (==) No screen section available. Using defaults.
[ 20.137] (**) |-->Screen "Default Screen Section" (0)
[ 20.137] (**) | |-->Monitor "<default monitor>"
[ 20.138] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 20.138] (==) Automatically adding devices
[ 20.138] (==) Automatically enabling devices
[ 20.138] (==) Automatically adding GPU devices
[ 20.138] (==) FontPath set to:
catalogue:/etc/X11/fontpath.d
[ 20.138] (==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 20.138] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 20.138] (II) Loader magic: 0x82b1680
[ 20.138] (II) Module ABI versions:
[ 20.138] X.Org ANSI C Emulation: 0.4
[ 20.138] X.Org Video Driver: 19.0
[ 20.138] X.Org XInput driver : 21.1
[ 20.138] X.Org Server Extension : 9.0
[ 20.139] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 20.153] (--) PCI:*(0:0:2:0) 8086:0116:8086:2010 rev 9, Mem @ 0xf6c00000/4194304, 0xe0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[ 20.153] (II) Open ACPI successful (/var/run/acpid.socket)
[ 20.164] (II) LoadModule: "glx"
[ 20.166] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 20.360] (II) Module glx: vendor="X.Org Foundation"
[ 20.360] compiled for 1.17.4, module version = 1.0.0
[ 20.360] ABI class: X.Org Server Extension, version 9.0
[ 20.360] (==) AIGLX enabled
[ 20.360] (==) Matched intel as autoconfigured driver 0
[ 20.360] (==) Matched intel as autoconfigured driver 1
[ 20.360] (==) Matched modesetting as autoconfigured driver 2
[ 20.360] (==) Matched fbdev as autoconfigured driver 3
[ 20.360] (==) Matched vesa as autoconfigured driver 4
[ 20.360] (==) Assigned the driver to the xf86ConfigLayout
[ 20.360] (II) LoadModule: "intel"
[ 20.360] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 20.419] (II) Module intel: vendor="X.Org Foundation"
[ 20.419] compiled for 1.17.4, module version = 2.99.917
[ 20.419] Module class: X.Org Video Driver
[ 20.419] ABI class: X.Org Video Driver, version 19.0
[ 20.419] (II) LoadModule: "modesetting"
[ 20.419] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 20.424] (II) Module modesetting: vendor="X.Org Foundation"
[ 20.424] compiled for 1.17.4, module version = 1.17.4
[ 20.424] Module class: X.Org Video Driver
[ 20.424] ABI class: X.Org Video Driver, version 19.0
[ 20.424] (II) LoadModule: "fbdev"
[ 20.424] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 20.440] (II) Module fbdev: vendor="X.Org Foundation"
[ 20.440] compiled for 1.17.4, module version = 0.4.4
[ 20.440] Module class: X.Org Video Driver
[ 20.440] ABI class: X.Org Video Driver, version 19.0
[ 20.440] (II) LoadModule: "vesa"
[ 20.440] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 20.455] (II) Module vesa: vendor="X.Org Foundation"
[ 20.455] compiled for 1.17.4, module version = 2.3.4
[ 20.455] Module class: X.Org Video Driver
[ 20.455] ABI class: X.Org Video Driver, version 19.0
[ 20.455] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 20.456] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[ 20.456] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[ 20.456] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[ 20.456] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 20.456] (II) FBDEV: driver for framebuffer: fbdev
[ 20.456] (II) VESA: driver for VESA chipsets: vesa
[ 20.456] (++) using VT number 1
[ 20.458] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20160919
[ 20.459] (WW) Falling back to old probe method for modesetting
[ 20.459] (WW) Falling back to old probe method for fbdev
[ 20.459] (II) Loading sub module "fbdevhw"
[ 20.459] (II) LoadModule: "fbdevhw"
[ 20.459] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 20.474] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 20.474] compiled for 1.17.4, module version = 0.0.2
[ 20.474] ABI class: X.Org Video Driver, version 19.0
[ 20.474] (WW) Falling back to old probe method for vesa
[ 20.485] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 3000
[ 20.485] (--) intel(0): CPU: x86, sse2, sse3, ssse3, sse4.1, sse4.2, avx; using a maximum of 2 threads
[ 20.485] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 20.485] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 20.485] (==) intel(0): RGB weight 888
[ 20.485] (==) intel(0): Default visual is TrueColor
[ 20.485] (II) intel(0): Output VGA1 has no monitor section
[ 20.485] (II) intel(0): Enabled output VGA1
[ 20.485] (II) intel(0): Output HDMI1 has no monitor section
[ 20.486] (II) intel(0): Enabled output HDMI1
[ 20.486] (II) intel(0): Output DP1 has no monitor section
[ 20.486] (II) intel(0): Enabled output DP1
[ 20.486] (II) intel(0): Output HDMI2 has no monitor section
[ 20.486] (II) intel(0): Enabled output HDMI2
[ 20.486] (II) intel(0): Output DP2 has no monitor section
[ 20.486] (II) intel(0): Enabled output DP2
[ 20.486] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 20.486] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 20.486] (II) intel(0): Enabled output VIRTUAL1
[ 20.486] (--) intel(0): Output VGA1 using initial mode 1024x768 on pipe 0
[ 20.486] (==) intel(0): TearFree disabled
[ 20.486] (==) intel(0): DPI set to (96, 96)
[ 20.486] (II) Loading sub module "dri2"
[ 20.486] (II) LoadModule: "dri2"
[ 20.486] (II) Module "dri2" already built-in
[ 20.486] (II) Loading sub module "present"
[ 20.486] (II) LoadModule: "present"
[ 20.486] (II) Module "present" already built-in
[ 20.486] (II) UnloadModule: "modesetting"
[ 20.486] (II) Unloading modesetting
[ 20.487] (II) UnloadModule: "fbdev"
[ 20.487] (II) Unloading fbdev
[ 20.487] (II) UnloadSubModule: "fbdevhw"
[ 20.487] (II) Unloading fbdevhw
[ 20.487] (II) UnloadModule: "vesa"
[ 20.487] (II) Unloading vesa
[ 20.487] (==) Depth 24 pixmap format is 32 bpp
[ 20.514] (II) intel(0): SNA initialized with Sandybridge (gen6, gt2) backend
[ 20.514] (==) intel(0): Backing store enabled
[ 20.514] (==) intel(0): Silken mouse enabled
[ 20.514] (II) intel(0): HW Cursor enabled
[ 20.515] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 20.516] (==) intel(0): DPMS enabled
[ 20.516] (==) intel(0): Display hotplug detection enabled
[ 20.517] (II) intel(0): [DRI2] Setup complete
[ 20.517] (II) intel(0): [DRI2] DRI driver: i965
[ 20.517] (II) intel(0): [DRI2] VDPAU driver: va_gl
[ 20.517] (II) intel(0): direct rendering: DRI2 enabled
[ 20.517] (II) intel(0): hardware support for Present enabled
[ 20.517] (--) RandR disabled
[ 20.671] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 20.671] (II) AIGLX: enabled GLX_ARB_create_context
[ 20.671] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 20.671] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 20.671] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 20.671] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 20.671] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 20.671] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 20.671] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 20.671] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 20.672] (II) AIGLX: Loaded and initialized i965
[ 20.672] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 20.690] (II) intel(0): switch to mode 1024x768@60.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 20.702] (II) intel(0): Setting screen physical size to 270 x 203
[ 21.334] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 21.334] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 21.334] (**) Power Button: Applying InputClass "system-keyboard"
[ 21.334] (II) LoadModule: "evdev"
[ 21.379] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 21.404] (II) Module evdev: vendor="X.Org Foundation"
[ 21.404] compiled for 1.17.4, module version = 2.10.0
[ 21.404] Module class: X.Org XInput Driver
[ 21.404] ABI class: X.Org XInput driver, version 21.1
[ 21.404] (II) Using input driver 'evdev' for 'Power Button'
[ 21.404] (**) Power Button: always reports core events
[ 21.404] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 21.405] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 21.405] (--) evdev: Power Button: Found keys
[ 21.405] (II) evdev: Power Button: Configuring as keyboard
[ 21.405] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 21.405] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 21.405] (**) Option "xkb_rules" "evdev"
[ 21.405] (**) Option "xkb_model" "pc105"
[ 21.405] (**) Option "xkb_layout" "us,ru"
[ 21.405] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll,compose:rwin"
[ 21.469] (II) config/udev: Adding input device Video Bus (/dev/input/event3)
[ 21.469] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 21.469] (**) Video Bus: Applying InputClass "system-keyboard"
[ 21.469] (II) Using input driver 'evdev' for 'Video Bus'
[ 21.469] (**) Video Bus: always reports core events
[ 21.469] (**) evdev: Video Bus: Device: "/dev/input/event3"
[ 21.469] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 21.469] (--) evdev: Video Bus: Found keys
[ 21.469] (II) evdev: Video Bus: Configuring as keyboard
[ 21.469] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5/event3"
[ 21.469] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 21.469] (**) Option "xkb_rules" "evdev"
[ 21.469] (**) Option "xkb_model" "pc105"
[ 21.469] (**) Option "xkb_layout" "us,ru"
[ 21.469] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll,compose:rwin"
[ 21.470] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 21.470] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 21.470] (**) Power Button: Applying InputClass "system-keyboard"
[ 21.470] (II) Using input driver 'evdev' for 'Power Button'
[ 21.470] (**) Power Button: always reports core events
[ 21.470] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 21.471] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 21.471] (--) evdev: Power Button: Found keys
[ 21.471] (II) evdev: Power Button: Configuring as keyboard
[ 21.471] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 21.471] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 21.471] (**) Option "xkb_rules" "evdev"
[ 21.471] (**) Option "xkb_model" "pc105"
[ 21.471] (**) Option "xkb_layout" "us,ru"
[ 21.471] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll,compose:rwin"
[ 21.472] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event5)
[ 21.473] (II) No input driver specified, ignoring this device.
[ 21.473] (II) This device may have been added with another device file.
[ 21.473] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event4)
[ 21.473] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 21.473] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse'
[ 21.473] (**) Logitech USB Optical Mouse: always reports core events
[ 21.473] (**) evdev: Logitech USB Optical Mouse: Device: "/dev/input/event4"
[ 21.525] (--) evdev: Logitech USB Optical Mouse: Vendor 0x46d Product 0xc05b
[ 21.525] (--) evdev: Logitech USB Optical Mouse: Found 12 mouse buttons
[ 21.525] (--) evdev: Logitech USB Optical Mouse: Found scroll wheel(s)
[ 21.525] (--) evdev: Logitech USB Optical Mouse: Found relative axes
[ 21.525] (--) evdev: Logitech USB Optical Mouse: Found x and y relative axes
[ 21.525] (II) evdev: Logitech USB Optical Mouse: Configuring as mouse
[ 21.525] (II) evdev: Logitech USB Optical Mouse: Adding scrollwheel support
[ 21.525] (**) evdev: Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 21.525] (**) evdev: Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 21.525] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:046D:C05B.0001/input/input6/event4"
[ 21.525] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 9)
[ 21.525] (II) evdev: Logitech USB Optical Mouse: initialized for relative axes.
[ 21.526] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 21.526] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0
[ 21.526] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[ 21.526] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[ 21.527] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
[ 21.527] (II) No input driver specified, ignoring this device.
[ 21.527] (II) This device may have been added with another device file.
[ 21.528] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event2)
[ 21.528] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 21.528] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[ 21.528] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 21.528] (**) AT Translated Set 2 keyboard: always reports core events
[ 21.528] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event2"
[ 21.528] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 21.528] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 21.528] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 21.528] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input2/event2"
[ 21.528] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[ 21.528] (**) Option "xkb_rules" "evdev"
[ 21.528] (**) Option "xkb_model" "pc105"
[ 21.528] (**) Option "xkb_layout" "us,ru"
[ 21.528] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll,compose:rwin"