[ 0.461337] tun: (C) 1999-2004 Max Krasnyansky <
maxk@qualcomm.com>
[ 0.461367] PPP generic driver version 2.4.2
[ 0.461402] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.461405] ehci-pci: EHCI PCI platform driver
[ 0.461472] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.461477] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.461488] ehci-pci 0000:00:1d.7: debug port 1
[ 0.465399] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[ 0.465413] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf9ffbc00
[ 0.476011] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.476067] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.476069] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.476071] usb usb1: Product: EHCI Host Controller
[ 0.476073] usb usb1: Manufacturer: Linux 3.13.0-33-generic ehci_hcd
[ 0.476074] usb usb1: SerialNumber: 0000:00:1d.7
[ 0.476148] hub 1-0:1.0: USB hub found
[ 0.476156] hub 1-0:1.0: 8 ports detected
[ 0.476291] ehci-platform: EHCI generic platform driver
[ 0.476297] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.476298] ohci-pci: OHCI PCI platform driver
[ 0.476308] ohci-platform: OHCI generic platform driver
[ 0.476313] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.476369] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.476375] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.476393] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c480
[ 0.476432] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.476433] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.476435] usb usb2: Product: UHCI Host Controller
[ 0.476437] usb usb2: Manufacturer: Linux 3.13.0-33-generic uhci_hcd
[ 0.476438] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.476503] hub 2-0:1.0: USB hub found
[ 0.476511] hub 2-0:1.0: 2 ports detected
[ 0.476622] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.476625] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.476644] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c800
[ 0.476684] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.476686] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.476687] usb usb3: Product: UHCI Host Controller
[ 0.476689] usb usb3: Manufacturer: Linux 3.13.0-33-generic uhci_hcd
[ 0.476690] usb usb3: SerialNumber: 0000:00:1d.1
[ 0.476758] hub 3-0:1.0: USB hub found
[ 0.476764] hub 3-0:1.0: 2 ports detected
[ 0.476873] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.476877] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.476902] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c880
[ 0.476940] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.476942] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.476943] usb usb4: Product: UHCI Host Controller
[ 0.476945] usb usb4: Manufacturer: Linux 3.13.0-33-generic uhci_hcd
[ 0.476947] usb usb4: SerialNumber: 0000:00:1d.2
[ 0.477012] hub 4-0:1.0: USB hub found
[ 0.477018] hub 4-0:1.0: 2 ports detected
[ 0.477131] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.477135] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 0.477160] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000cc00
[ 0.477198] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.477199] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.477201] usb usb5: Product: UHCI Host Controller
[ 0.477203] usb usb5: Manufacturer: Linux 3.13.0-33-generic uhci_hcd
[ 0.477204] usb usb5: SerialNumber: 0000:00:1d.3
[ 0.477271] hub 5-0:1.0: USB hub found
[ 0.477276] hub 5-0:1.0: 2 ports detected
[ 0.477397] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.480187] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.480191] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.480264] mousedev: PS/2 mouse device common for all mice
[ 0.480351] rtc_cmos 00:02: RTC can wake from S4
[ 0.480440] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.480460] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.480518] device-mapper: uevent: version 1.0.3
[ 0.480559] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised:
dm-devel@redhat.com
[ 0.480577] platform eisa.0: Probing EISA bus 0
[ 0.480579] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 0.480581] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 0.480583] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 0.480584] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 0.480586] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 0.480587] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 0.480589] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 0.480591] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 0.480592] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 0.480594] platform eisa.0: EISA: Detected 0 cards
[ 0.480598] cpufreq-nforce2: No nForce2 chipset.
[ 0.480602] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.480703] TCP: cubic registered
[ 0.480782] NET: Registered protocol family 10
[ 0.480941] NET: Registered protocol family 17
[ 0.480949] Key type dns_resolver registered
[ 0.481063] Using IPI No-Shortcut mode
[ 0.481119] Loading compiled-in X.509 certificates
[ 0.483817] Loaded X.509 cert 'Magrathea: Glacier signing key: b35c17000350bf67b548787ad182d39cde7acf65'
[ 0.483824] registered taskstats version 1
[ 0.496728] Key type trusted registered
[ 0.502546] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 0.512717] Key type encrypted registered
[ 0.528150] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.528153] IMA: No TPM chip found, activating TPM-bypass!
[ 0.528309] regulator-dummy: disabling
[ 0.528337] Magic number: 10:126:594
[ 0.528387] rtc_cmos 00:02: setting system clock to 2014-12-30 17:33:03 UTC (1419960783)
[ 0.528593] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.528595] EDD information not available.
[ 0.528619] PM: Hibernation image not present or could not be loaded.
[ 0.641606] ata1.00: ATAPI: Optiarc DVD RW AD-5200A, 1.05, max UDMA/66
[ 0.642107] ata3.00: ATA-8: MAXTOR STM3500320AS, MX1A, max UDMA/133
[ 0.642109] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 0.656181] ata1.00: configured for UDMA/66
[ 0.656650] ata3.00: configured for UDMA/133
[ 0.784460] isapnp: No Plug & Play device found
[ 0.786182] scsi 0:0:0:0: CD-ROM Optiarc DVD RW AD-5200A 1.05 PQ: 0 ANSI: 5
[ 0.788451] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 0.788454] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 0.788555] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 0.788628] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 0.788723] scsi 2:0:0:0: Direct-Access ATA MAXTOR STM350032 MX1A PQ: 0 ANSI: 5
[ 0.788801] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 0.788831] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 0.788854] sd 2:0:0:0: [sda] Write Protect is off
[ 0.788856] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.788880] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.839286] sda: sda1 sda2 sda3 < sda5 sda6 >
[ 0.839628] sd 2:0:0:0: [sda] Attached SCSI disk
[ 0.839881] Freeing unused kernel memory: 872K (c19b4000 - c1a8e000)
[ 0.839910] Write protecting the kernel text: 6532k
[ 0.839974] Write protecting the kernel read-only data: 2764k
[ 0.839975] NX-protecting the kernel data: 5756k
[ 0.849057] systemd-udevd[103]: starting version 204
[ 0.876395] Floppy drive(s): fd0 is 1.44M
[ 0.895688] FDC 0 is a post-1991 82077
[ 1.048028] usb 1-7: new high-speed USB device number 3 using ehci-pci
[ 1.182330] usb 1-7: New USB device found, idVendor=058f, idProduct=6362
[ 1.182334] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.182337] usb 1-7: Product: Mass Storage Device
[ 1.182340] usb 1-7: Manufacturer: Generic
[ 1.182342] usb 1-7: SerialNumber: 058F312D81B
[ 1.292027] usb 1-8: new high-speed USB device number 4 using ehci-pci
[ 1.408016] tsc: Refined TSC clocksource calibration: 3177.252 MHz
[ 1.425455] usb 1-8: New USB device found, idVendor=0bda, idProduct=8178
[ 1.425459] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.425462] usb 1-8: Product: USB WLAN
[ 1.425464] usb 1-8: Manufacturer: 802.11n
[ 1.425466] usb 1-8: SerialNumber: 00e04c000001
[ 1.431796] usb-storage 1-7:1.0: USB Mass Storage device detected
[ 1.431839] scsi4 : usb-storage 1-7:1.0
[ 1.431890] usbcore: registered new interface driver usb-storage
[ 1.599010] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 1.664031] usb 3-1: new full-speed USB device number 2 using uhci_hcd
[ 1.832677] usb 3-1: New USB device found, idVendor=09da, idProduct=0080
[ 1.832681] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.832684] usb 3-1: Product: USB Mouse
[ 1.832687] usb 3-1: Manufacturer: A4Tech
[ 2.408052] Switched to clocksource tsc
[ 2.428720] scsi 4:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 2.429223] scsi 4:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[ 2.429724] scsi 4:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
[ 2.430220] scsi 4:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 2.430453] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 2.430629] sd 4:0:0:1: Attached scsi generic sg3 type 0
[ 2.430726] sd 4:0:0:2: Attached scsi generic sg4 type 0
[ 2.430928] sd 4:0:0:3: Attached scsi generic sg5 type 0
[ 2.436085] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 2.436708] sd 4:0:0:1: [sdc] Attached SCSI removable disk
[ 2.437333] sd 4:0:0:2: [sdd] Attached SCSI removable disk
[ 2.437958] sd 4:0:0:3: [sde] Attached SCSI removable disk
[ 2.457581] random: init urandom read with 120 bits of entropy available
[ 2.631558] random: nonblocking pool is initialized
[ 32.137544] Adding 4191228k swap on /dev/sda5. Priority:-1 extents:1 across:4191228k FS
[ 32.196484] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 32.278950] systemd-udevd[285]: starting version 204
[ 32.456905] lp: driver loaded but no devices found
[ 32.475886] ppdev: user-space parallel port driver
[ 32.480912] parport_pc 00:06: reported by Plug and Play ACPI
[ 32.481009] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 32.515477] intel_rng: FWH not detected
[ 32.531812] ACPI Warning: 0x000004b0-0x000004bf SystemIO conflicts with Region \_SB_.PCI0.SBRG.SIOR.GPIO 1 (20131115/utaddress-251)
[ 32.531817] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 32.531819] ACPI Warning: 0x00000480-0x000004af SystemIO conflicts with Region \_SB_.PCI0.SBRG.SIOR.GPIO 1 (20131115/utaddress-251)
[ 32.531822] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 32.531823] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 32.536536] leds_ss4200: no LED devices found
[ 32.544160] [drm] Initialized drm 1.1.0 20060810
[ 32.561860] nvidia: module license 'NVIDIA' taints kernel.
[ 32.561863] Disabling lock debugging due to kernel taint
[ 32.576338] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[ 32.576640] lp0: using parport0 (interrupt-driven).
[ 32.590182] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
[ 32.591703] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 0
[ 32.591709] NVRM: loading NVIDIA UNIX x86 Kernel Module 331.113 Mon Dec 1 20:14:01 PST 2014
[ 32.616343] type=1400 audit(1419939215.585:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=356 comm="apparmor_parser"
[ 32.616349] type=1400 audit(1419939215.585:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=356 comm="apparmor_parser"
[ 32.616353] type=1400 audit(1419939215.585:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=356 comm="apparmor_parser"
[ 32.616736] type=1400 audit(1419939215.585:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=356 comm="apparmor_parser"
[ 32.616740] type=1400 audit(1419939215.585:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=356 comm="apparmor_parser"
[ 32.616930] type=1400 audit(1419939215.585:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=356 comm="apparmor_parser"
[ 32.687491] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[ 32.703613] autoconfig: line_outs=4 (0x1c/0x19/0x22/0x23/0x0) type:line
[ 32.703616] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 32.703617] hp_outs=1 (0x1d/0x0/0x0/0x0/0x0)
[ 32.703618] mono: mono_out=0x0
[ 32.703619] dig-out=0x20/0x0
[ 32.703620] inputs:
[ 32.703621] Rear Mic=0x1a
[ 32.703623] Front Mic=0x1e
[ 32.703624] Line=0x1b
[ 32.703625] CD=0x1f
[ 32.708874] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 32.708932] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 32.709019] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 32.709117] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 32.709202] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 32.709286] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 32.709370] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 32.709453] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[ 32.802382] hidraw: raw HID events driver (C) Jiri Kosina
[ 32.805101] cfg80211: Calling CRDA to update world regulatory domain
[ 32.811572] usbcore: registered new interface driver usbhid
[ 32.811573] usbhid: USB HID core driver
[ 32.945312] input: A4Tech USB Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input13
[ 32.945485] hid-generic 0003:09DA:0080.0001: input,hidraw0: USB HID v1.11 Mouse [A4Tech USB Mouse] on usb-0000:00:1d.1-1/input0
[ 32.959610] rtl8192cu: Chip version 0x11
[ 32.992900] cfg80211: World regulatory domain updated:
[ 32.992902] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 32.992904] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 32.992906] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 32.992907] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 32.992908] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 32.992909] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 33.045710] rtl8192cu: MAC address: f8:1a:67:19:2d:48
[ 33.045715] rtl8192cu: Board Type 0
[ 33.045959] rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1
[ 33.045986] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin
[ 33.046101] usbcore: registered new interface driver rtl8192cu
[ 33.136028] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 33.136457] rtlwifi: wireless switch is on
[ 33.353789] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[ 33.744929] init: failsafe main process (625) killed by TERM signal
[ 33.965283] Bluetooth: Core ver 2.17
[ 33.965312] NET: Registered protocol family 31
[ 33.965313] Bluetooth: HCI device and connection manager initialized
[ 33.965475] Bluetooth: HCI socket layer initialized
[ 33.965478] Bluetooth: L2CAP socket layer initialized
[ 33.965482] Bluetooth: SCO socket layer initialized
[ 33.970652] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 33.970654] Bluetooth: BNEP filters: protocol multicast
[ 33.970658] Bluetooth: BNEP socket layer initialized
[ 33.979082] Bluetooth: RFCOMM TTY layer initialized
[ 33.979090] Bluetooth: RFCOMM socket layer initialized
[ 33.979094] Bluetooth: RFCOMM ver 1.11
[ 33.986962] type=1400 audit(1419939216.953:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=704 comm="apparmor_parser"
[ 33.986969] type=1400 audit(1419939216.953:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=704 comm="apparmor_parser"
[ 33.987341] type=1400 audit(1419939216.953:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=704 comm="apparmor_parser"
[ 34.060767] type=1400 audit(1419939217.029:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=757 comm="apparmor_parser"
[ 34.186465] init: cups main process (714) killed by HUP signal
[ 34.186474] init: cups main process ended, respawning
[ 34.486628] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 34.487433] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 34.493956] rtl8192cu: MAC auto ON okay!
[ 34.533837] rtl8192cu: Tx queue select: 0x05
[ 34.934366] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 34.934605] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 35.618015] vboxdrv: Found 2 processor cores.
[ 35.618751] vboxdrv: fAsync=0 offMin=0x1c8 offMax=0x976
[ 35.618810] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 35.618811] vboxdrv: Successfully loaded version 4.3.10_Ubuntu (interface 0x001a0007).
[ 35.638367] vboxpci: IOMMU not found (not registered)
[ 36.492463] wlan0: authenticate with d4:bf:7f:46:99:ea
[ 36.516397] wlan0: send auth to d4:bf:7f:46:99:ea (try 1/3)
[ 36.524474] wlan0: authenticated
[ 36.528010] wlan0: associate with d4:bf:7f:46:99:ea (try 1/3)
[ 36.544718] wlan0: RX AssocResp from d4:bf:7f:46:99:ea (capab=0x431 status=0 aid=1)
[ 36.544753] wlan0: associated
[ 36.544762] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 36.825596] wlan0: deauthenticating from d4:bf:7f:46:99:ea by local choice (reason=2)
[ 36.837491] cfg80211: Calling CRDA to update world regulatory domain
[ 36.837591] wlan0: authenticate with d4:bf:7f:46:99:ea
[ 36.849640] wlan0: send auth to d4:bf:7f:46:99:ea (try 1/3)
[ 36.849768] cfg80211: World regulatory domain updated:
[ 36.849771] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 36.849774] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 36.849776] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 36.849779] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 36.849781] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 36.849783] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 36.854217] wlan0: authenticated
[ 36.856013] wlan0: associate with d4:bf:7f:46:99:ea (try 1/3)
[ 36.872715] wlan0: RX AssocResp from d4:bf:7f:46:99:ea (capab=0x431 status=0 aid=1)
[ 36.872739] wlan0: associated
[ 37.965076] nvidia 0000:01:00.0: irq 44 for MSI/MSI-X
[ 39.310906] init: plymouth-upstart-bridge main process ended, respawning
[ 64.101694] audit_printk_skb: 150 callbacks suppressed
[ 64.101698] type=1400 audit(1419939247.069:62): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=5091 comm="apparmor_parser"
[ 64.101704] type=1400 audit(1419939247.069:63): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=5091 comm="apparmor_parser"
[ 64.102078] type=1400 audit(1419939247.069:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=5091 comm="apparmor_parser"
[ 65.107141] Chrome_ChildThr[3885]: segfault at 0 ip b77ae0b8 sp b0c40a00 error 6 in libmozalloc.so[b77ad000+2000]
[ 300.006970] perf samples too long (2514 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[ 562.680038] usb 1-6: new high-speed USB device number 5 using ehci-pci
[ 562.812944] usb 1-6: New USB device found, idVendor=0bb4, idProduct=0001
[ 562.812949] usb 1-6: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[ 562.812952] usb 1-6: Product: PMP7280C3G Android Phone
[ 562.812954] usb 1-6: Manufacturer: HTT
[ 562.812957] usb 1-6: SerialNumber: 0123456789ABCDEF
[ 562.813719] usb-storage 1-6:1.0: USB Mass Storage device detected
[ 562.813871] scsi5 : usb-storage 1-6:1.0
[ 563.812720] scsi 5:0:0:0: Direct-Access Linux File-CD Gadget 0000 PQ: 0 ANSI: 2
[ 563.813208] scsi 5:0:0:1: Direct-Access Linux File-CD Gadget 0000 PQ: 0 ANSI: 2
[ 563.813477] sd 5:0:0:0: Attached scsi generic sg6 type 0
[ 563.813669] sd 5:0:0:1: Attached scsi generic sg7 type 0
[ 563.822194] sd 5:0:0:0: [sdf] Attached SCSI removable disk
[ 563.822815] sd 5:0:0:1: [sdg] Attached SCSI removable disk
[ 573.376433] systemd-hostnamed[31438]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[ 580.576333] sd 5:0:0:1: [sdg] 977920 512-byte logical blocks: (500 MB/477 MiB)
[ 580.577574] sd 5:0:0:1: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 580.582843] sdg: sdg1
[ 581.104575] FAT-fs (sdg1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 582.622839] sd 5:0:0:0: [sdf] 11530688 512-byte logical blocks: (5.90 GB/5.49 GiB)
[ 582.624158] sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 582.628345] sdf:
[ 582.835074] FAT-fs (sdf): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 690.183680] VFS: busy inodes on changed media or resized disk sdf
[ 690.184374] FAT-fs (sdf): bread failed in fat_clusters_flush
[ 690.202011] sdg: detected capacity change from 500695040 to 0
[ 690.224599] sdf: detected capacity change from 5903712256 to 0
[ 695.406265] usb 1-6: USB disconnect, device number 5
[ 736.204032] usb 1-5: new high-speed USB device number 6 using ehci-pci
[ 736.337473] usb 1-5: New USB device found, idVendor=1111, idProduct=2222
[ 736.337478] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 736.337481] usb 1-5: Product: Disk
[ 736.337484] usb 1-5: Manufacturer: USB
[ 736.337486] usb 1-5: SerialNumber: MPL4TY4175709538
[ 736.337757] usb-storage 1-5:1.0: USB Mass Storage device detected
[ 736.337810] scsi6 : usb-storage 1-5:1.0
[ 737.336622] scsi 6:0:0:0: Direct-Access USB Disk 2.b0 PQ: 0 ANSI: 2
[ 737.336891] sd 6:0:0:0: Attached scsi generic sg6 type 0
[ 737.341503] sd 6:0:0:0: [sdf] 16384000 512-byte logical blocks: (8.38 GB/7.81 GiB)
[ 737.342705] sd 6:0:0:0: [sdf] Write Protect is off
[ 737.342710] sd 6:0:0:0: [sdf] Mode Sense: 0b 00 00 08
[ 737.343355] sd 6:0:0:0: [sdf] No Caching mode page found
[ 737.343360] sd 6:0:0:0: [sdf] Assuming drive cache: write through
[ 737.347957] sd 6:0:0:0: [sdf] No Caching mode page found
[ 737.347962] sd 6:0:0:0: [sdf] Assuming drive cache: write through
[ 737.349735] sdf: sdf1
[ 737.352975] sd 6:0:0:0: [sdf] No Caching mode page found
[ 737.352979] sd 6:0:0:0: [sdf] Assuming drive cache: write through
[ 737.352983] sd 6:0:0:0: [sdf] Attached SCSI removable disk
[ 996.207511] type=1400 audit(1419940179.172:65): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=7812 comm="apparmor_parser"
[ 996.207519] type=1400 audit(1419940179.172:66): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=7812 comm="apparmor_parser"
[ 996.207892] type=1400 audit(1419940179.172:67): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=7812 comm="apparmor_parser"
[ 1430.246594] wlan0: deauthenticated from d4:bf:7f:46:99:ea (Reason: 3)
[ 1430.277154] cfg80211: Calling CRDA to update world regulatory domain
[ 1430.329859] cfg80211: World regulatory domain updated:
[ 1430.329861] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 1430.329862] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1430.329864] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1430.329865] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 1430.329867] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1430.329868] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1431.100734] wlan0: authenticate with d4:bf:7f:46:99:ea
[ 1431.113765] wlan0: send auth to d4:bf:7f:46:99:ea (try 1/3)
[ 1431.130467] wlan0: authenticated
[ 1431.132019] wlan0: associate with d4:bf:7f:46:99:ea (try 1/3)
[ 1431.138844] wlan0: RX AssocResp from d4:bf:7f:46:99:ea (capab=0x431 status=0 aid=1)
[ 1431.138884] wlan0: associated
[ 1731.272769] wlan0: deauthenticated from d4:bf:7f:46:99:ea (Reason: 3)
[ 1731.309565] cfg80211: Calling CRDA to update world regulatory domain
[ 1731.311772] cfg80211: World regulatory domain updated:
[ 1731.311774] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 1731.311776] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1731.311778] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1731.311779] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 1731.311780] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1731.311782] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1732.104738] wlan0: authenticate with d4:bf:7f:46:99:ea
[ 1732.117191] wlan0: send auth to d4:bf:7f:46:99:ea (try 1/3)
[ 1732.141645] wlan0: authenticated
[ 1732.144017] wlan0: associate with d4:bf:7f:46:99:ea (try 1/3)
[ 1732.158647] wlan0: RX AssocResp from d4:bf:7f:46:99:ea (capab=0x431 status=0 aid=1)
[ 1732.158672] wlan0: associated
[ 7415.306647] Chrome_ChildThr[9091]: segfault at 0 ip b76d00b8 sp b0b40a00 error 6 in libmozalloc.so[b76cf000+2000]
[ 8721.473258] usb 1-5: USB disconnect, device number 6
[ 8721.864081] FAT-fs (sdf1): unable to read boot sector to mark fs as dirty
[ 8726.512028] usb 1-5: new high-speed USB device number 7 using ehci-pci
[ 8726.644709] usb 1-5: New USB device found, idVendor=2304, idProduct=0224
[ 8726.644713] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 8726.644717] usb 1-5: Product: Pinnacle High Speed USB Device
[ 8726.644719] usb 1-5: Manufacturer: Pinnacle Systems, Inc.
[ 8757.148489] systemd-hostnamed[12492]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!