После обновления не запускаются X-ы.

Ответить
xruss
Сообщения: 169
Зарегистрирован: 24 апр 2013, 15:38
Operating system: ROSA DESKTOP

После обновления не запускаются X-ы.

Сообщение xruss » 17 окт 2013, 10:46

Добрый день!
Подскажите как запустить X-ы под пользователем - запускаются только от рута. Произошло это после обновления через urpmi --auto-update :(
Изображение

Код: Выделить всё

[root@pavel-dell ~]# uname -a
Linux pavel-dell.localdomain 3.10.9-nrj-desktop-1rosa #1 SMP PREEMPT Tue Aug 27 19:36:40 MSK 2013 x86_64 x86_64 x86_64 GNU/Linux
Вернуться к началу
Аватара пользователя
akdengi
Сообщения: 1381
Зарегистрирован: 12 сен 2011, 13:44

Re: После обновления не запускаются X-ы.

Сообщение akdengi » 17 окт 2013, 12:38

просто запустите XFdrake и заново настройте видеокарту.
Вернуться к началу
saman
Сообщения: 346
Зарегистрирован: 18 июн 2012, 05:19

Re: После обновления не запускаются X-ы.

Сообщение saman » 17 окт 2013, 14:04

Это вообще какая-то больная тема РОСЫ. Я раньше тоже страдал, что не грузился комп после обновления. У вас хоть в консоль вошел, а я вис на этапе загрузки.
И все это из-за драйверов к видеокарточке.
Вернуться к началу
keleg
Сообщения: 5516
Зарегистрирован: 15 сен 2011, 01:58

Re: После обновления не запускаются X-ы.

Сообщение keleg » 17 окт 2013, 17:36

Такие вот драйверы делают - мы пока не можем проверить все известные карточки, хотя для каждого типа драйвера одну-две тестируем обязательно.
Вернуться к началу
Аватара пользователя
akdengi
Сообщения: 1381
Зарегистрирован: 12 сен 2011, 13:44

Re: После обновления не запускаются X-ы.

Сообщение akdengi » 17 окт 2013, 19:01

saman писал(а):Это вообще какая-то больная тема РОСЫ. Я раньше тоже страдал, что не грузился комп после обновления. У вас хоть в консоль вошел, а я вис на этапе загрузки.
И все это из-за драйверов к видеокарточке.
Это больная тема для всех: если не будете ставить проприетарные блобы - не будет проблем, так как все будет на автомате на уровне ядра.

А когда та же AMD под новые ядра выпускает релизные драйвера, которые ломают систему, а новая бета работает в разы хуже, чем была до этого, то мы тут ничем не можем помочь. Особенно если говорить, что все сломалось и не говорить хотя бы какая видеокарта в системе и стояли ли проприетарные драйвера.
Вернуться к началу
xruss
Сообщения: 169
Зарегистрирован: 24 апр 2013, 15:38
Operating system: ROSA DESKTOP

Re: После обновления не запускаются X-ы.

Сообщение xruss » 21 окт 2013, 10:24

XFdrake из консоли предложил установку проприетарного драйвера ATI. установка прошла с ошибкой. далее я переустановил систему и после ее обновления все повторилось)
надо учиться работать из консоли) у меня ноут Dell Inspiron3521, Dell Model No: 3521-6982.
Может быть я неправильно выбрал из списка XFdrake( XFdrake сам решает какой проприетарный драйвер качать?)
Видеоплата какая-то из этих
Intel® HD Graphics
Intel® HD Graphics 4000
Intel® HD Graphics 3000
Intel® HD Graphics 4400
Вернуться к началу
Аватара пользователя
VictorR2007
Сообщения: 7273
Зарегистрирован: 12 сен 2011, 13:00
Operating system: ROSA 2023.1

Re: После обновления не запускаются X-ы.

Сообщение VictorR2007 » 21 окт 2013, 11:06

xruss писал(а):XFdrake из консоли предложил установку проприетарного драйвера ATI
Видеоплата какая-то из этих
Intel® HD Graphics
Intel® HD Graphics 4000
Intel® HD Graphics 3000
Intel® HD Graphics 4400
Разве на карточки intel идут дрова ATI?
Вернуться к началу
Аватара пользователя
akdengi
Сообщения: 1381
Зарегистрирован: 12 сен 2011, 13:44

Re: После обновления не запускаются X-ы.

Сообщение akdengi » 21 окт 2013, 11:40

У вас гибрид - то есть или в BIOS ищите опцию использовать только дискретную карту, или забудьте об AMD карточке и живите на интеле (на него драйвера ставить не надо).
Вернуться к началу
Аватара пользователя
ДроноваЮ
Сообщения: 2636
Зарегистрирован: 01 июн 2011, 13:11
Operating system: Ubuntu/ROSA
Откуда: Москва

Re: После обновления не запускаются X-ы.

Сообщение ДроноваЮ » 21 окт 2013, 15:45

akdengi писал(а):У вас гибрид - то есть или в BIOS ищите опцию использовать только дискретную карту, или забудьте об AMD карточке и живите на интеле (на него драйвера ставить не надо).
Подтверждаю, есть гибридный ноут Intel-NVidia, отлично работает на интеле, никаких проблем вообще.
Вернуться к началу
xruss
Сообщения: 169
Зарегистрирован: 24 апр 2013, 15:38
Operating system: ROSA DESKTOP

Re: После обновления не запускаются X-ы.

Сообщение xruss » 21 окт 2013, 19:00

Да, после установки драйвера Intel X-ы стали запускаться, но только от рута. от пользователя попрежнему пишет ошибку как в моем первом посте - там вроде как нет прав владельца на консоль(( как это можно исправить? может пользователя в какую-нибудь группу добавить?
Вернуться к началу
Аватара пользователя
ДроноваЮ
Сообщения: 2636
Зарегистрирован: 01 июн 2011, 13:11
Operating system: Ubuntu/ROSA
Откуда: Москва

Re: После обновления не запускаются X-ы.

Сообщение ДроноваЮ » 21 окт 2013, 19:34

Да нет, по умолчанию всё ок работать должно, щас будете если ещё ковырять, вообще всё поломаете окончательно.
Попробуйте ещё раз сделать urpmi --auto-update (исключив всякие AMD драйверы). А сейчас дайте лучше свежий лог иксов, которые не грузятся под юзером, это файл
/var/log/Xorg.0.log
Вернуться к началу
xruss
Сообщения: 169
Зарегистрирован: 24 апр 2013, 15:38
Operating system: ROSA DESKTOP

Re: После обновления не запускаются X-ы.

Сообщение xruss » 21 окт 2013, 20:24

Код: Выделить всё

[root@dell-notebook ~]# urpmi --auto-update
источник «main» уже обновлён
источник «main updates» уже обновлён
источник «contrib» уже обновлён
источник «contrib updates» уже обновлён
источник «non-free» уже обновлён
источник «non-free updates» уже обновлён
источник «restricted» уже обновлён
источник «restricted updates» уже обновлён
источник «main32» уже обновлён
источник «main32_updates» уже обновлён
источник «non-free32» уже обновлён
источник «non-free32_updates» уже обновлён
BDB2053 Freeing read locks for locker 0x463b: 5582/140036780799808
BDB2017 Freeing mutex for process: 5582/0
BDB2017 Freeing mutex for process: 5582/0
BDB2017 Freeing mutex for process: 5582/0
BDB2017 Freeing mutex for process: 5582/0
BDB2017 Freeing mutex for process: 5582/0
BDB2017 Freeing mutex for process: 5582/0
BDB2017 Freeing mutex for process: 5582/0
BDB2017 Freeing mutex for process: 5582/0
BDB2017 Freeing mutex for process: 5582/0
Пакеты находятся в актуальном состоянии
Лог иксов от пользователя:

Код: Выделить всё

[   175.765] 
X.Org X Server 1.13.4
Release Date: 2013-04-17
[   175.765] X Protocol Version 11, Revision 0
[   175.766] Build Operating System: Linux_3.6.7-nrj-desktop-1rosa mandriva
[   175.766] Current Operating System: Linux dell-notebook 3.10.9-nrj-desktop-1rosa #1 SMP PREEMPT Tue Aug 27 19:36:40 MSK 2013 x86_64
[   175.766] Kernel command line: BOOT_IMAGE=/vmlinuz-3.10.9-nrj-desktop-1rosa root=UUID=dfbab785-a805-49cd-b28b-941a505e251e ro splash=silent logo.nologo resume=/dev/sda1 init=/lib/systemd/systemd
[   175.766] Build Date: 29 July 2013  04:21:09PM
[   175.766]  
[   175.766] Current version of pixman: 0.28.2
[   175.766] 	Before reporting problems, check http://qa.mandriva.com
	to make sure that you have the latest version.
[   175.766] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   175.767] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Oct 21 18:54:31 2013
[   175.772] (==) Using config file: "/etc/X11/xorg.conf"
[   175.772] (==) Using config directory: "/etc/X11/xorg.conf.d"
[   175.772] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   175.774] (==) ServerLayout "layout1"
[   175.774] (**) |-->Screen "screen1" (0)
[   175.774] (**) |   |-->Monitor "monitor1"
[   175.775] (**) |   |-->Device "device1"
[   175.775] (**) Option "DontZap" "False"
[   175.775] (**) Option "AllowMouseOpenFail"
[   175.775] (==) Automatically adding devices
[   175.775] (==) Automatically enabling devices
[   175.775] (==) Automatically adding GPU devices
[   175.775] (==) FontPath set to:
	catalogue:/etc/X11/fontpath.d
[   175.776] (==) ModulePath set to "/usr/lib64/xorg/extra-modules,/usr/lib64/xorg/modules"
[   175.776] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[   175.776] (II) Loader magic: 0x7fdc20
[   175.776] (II) Module ABI versions:
[   175.776] 	X.Org ANSI C Emulation: 0.4
[   175.776] 	X.Org Video Driver: 13.1
[   175.776] 	X.Org XInput driver : 18.0
[   175.776] 	X.Org Server Extension : 7.0
[   175.776] (II) config/udev: Adding drm device (/dev/dri/card1)
[   175.776] (II) config/udev: Adding drm device (/dev/dri/card0)
[   175.778] (--) PCI:*(0:0:2:0) 8086:0166:1028:0598 rev 9, Mem @ 0xc1000000/4194304, 0xb0000000/268435456, I/O @ 0x00004000/64
[   175.778] (--) PCI: (0:1:0:0) 1002:6840:1028:0598 rev 0, Mem @ 0xa0000000/268435456, 0xc0000000/131072, I/O @ 0x00003000/256, BIOS @ 0x????????/131072
[   175.778] (II) Open ACPI successful (/var/run/acpid.socket)
[   175.779] Initializing built-in extension Generic Event Extension
[   175.779] Initializing built-in extension SHAPE
[   175.779] Initializing built-in extension MIT-SHM
[   175.779] Initializing built-in extension XInputExtension
[   175.779] Initializing built-in extension XTEST
[   175.779] Initializing built-in extension BIG-REQUESTS
[   175.779] Initializing built-in extension SYNC
[   175.779] Initializing built-in extension XKEYBOARD
[   175.779] Initializing built-in extension XC-MISC
[   175.781] Initializing built-in extension SECURITY
[   175.782] Initializing built-in extension XINERAMA
[   175.783] Initializing built-in extension XFIXES
[   175.784] Initializing built-in extension XFree86-Bigfont
[   175.785] Initializing built-in extension RENDER
[   175.786] Initializing built-in extension RANDR
[   175.787] Initializing built-in extension COMPOSITE
[   175.788] Initializing built-in extension DAMAGE
[   175.789] Initializing built-in extension MIT-SCREEN-SAVER
[   175.790] Initializing built-in extension DOUBLE-BUFFER
[   175.791] Initializing built-in extension RECORD
[   175.792] Initializing built-in extension DPMS
[   175.793] Initializing built-in extension X-Resource
[   175.794] Initializing built-in extension XVideo
[   175.795] Initializing built-in extension XVideo-MotionCompensation
[   175.796] Initializing built-in extension XFree86-VidModeExtension
[   175.797] Initializing built-in extension XFree86-DGA
[   175.798] Initializing built-in extension XFree86-DRI
[   175.798] Initializing built-in extension DRI2
[   175.798] (II) "glx" will be loaded by default.
[   175.798] (II) LoadModule: "v4l"
[   175.801] (II) Loading /usr/lib64/xorg/modules/drivers/v4l_drv.so
[   175.802] (II) Module v4l: vendor="X.Org Foundation"
[   175.802] 	compiled for 1.13.0, module version = 0.1.1
[   175.802] 	ABI class: X.Org Video Driver, version 13.0
[   175.802] (II) LoadModule: "glx"
[   175.802] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[   175.805] (II) Module glx: vendor="X.Org Foundation"
[   175.805] 	compiled for 1.13.4, module version = 1.0.0
[   175.805] 	ABI class: X.Org Server Extension, version 7.0
[   175.805] (==) AIGLX enabled
[   175.808] Loading extension GLX
[   175.808] (II) LoadModule: "intel"
[   175.808] (II) Loading /usr/lib64/xorg/modules/drivers/intel_drv.so
[   175.813] (II) Module intel: vendor="X.Org Foundation"
[   175.813] 	compiled for 1.13.2, module version = 2.21.6
[   175.813] 	Module class: X.Org Video Driver
[   175.813] 	ABI class: X.Org Video Driver, version 13.1
[   175.813] (II) v4l driver for Video4Linux
[   175.813] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
	i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
	E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
	965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
	4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
	Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
	Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
	Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
	Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
	Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
	Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
	Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
	Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
	Haswell Server (GT2+), Haswell SDV Desktop (GT1),
	Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
	Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
	Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
	Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
	Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
	Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
	Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
	Haswell ULT Server (GT1), Haswell ULT Server (GT2),
	Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
	Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
	Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
	Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
	Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
	ValleyView PO board
[   175.813] (++) using VT number 1

[   175.813] (WW) Falling back to old probe method for v4l
[   175.814] (II) intel(0): Creating default Display subsection in Screen section
	"screen1" for depth/fbbpp 24/32
[   175.814] (**) intel(0): Depth 24, (--) framebuffer bpp 32
[   175.814] (==) intel(0): RGB weight 888
[   175.814] (==) intel(0): Default visual is TrueColor
[   175.814] (--) intel(0): Integrated Graphics Chipset: Intel(R) Ivybridge Mobile (GT2)
[   175.814] (**) intel(0): Relaxed fencing enabled
[   175.814] (**) intel(0): Wait on SwapBuffers? enabled
[   175.814] (**) intel(0): Triple buffering? enabled
[   175.814] (**) intel(0): Framebuffer tiled
[   175.814] (**) intel(0): Pixmaps tiled
[   175.814] (**) intel(0): 3D buffers tiled
[   175.814] (**) intel(0): SwapBuffers wait enabled
[   175.814] (==) intel(0): video overlay key set to 0x101fe
[   175.814] (II) intel(0): Output LVDS1 using monitor section monitor1
[   175.815] (--) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[   175.831] (II) intel(0): Output VGA1 has no monitor section
[   175.831] (II) intel(0): Output HDMI1 has no monitor section
[   175.831] (II) intel(0): Output DP1 has no monitor section
[   175.831] (II) intel(0): EDID for output LVDS1
[   175.831] (II) intel(0): Manufacturer: LGD  Model: 3ab  Serial#: 0
[   175.831] (II) intel(0): Year: 2012  Week: 0
[   175.831] (II) intel(0): EDID Version: 1.4
[   175.831] (II) intel(0): Digital Display Input
[   175.831] (II) intel(0): 6 bits per channel
[   175.831] (II) intel(0): Digital interface is undefined
[   175.831] (II) intel(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[   175.831] (II) intel(0): Gamma: 2.20
[   175.831] (II) intel(0): No DPMS capabilities specified
[   175.831] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[   175.831] (II) intel(0): First detailed timing is preferred mode
[   175.831] (II) intel(0): Preferred mode is native pixel format and refresh rate
[   175.831] (II) intel(0): redX: 0.578 redY: 0.344   greenX: 0.337 greenY: 0.571
[   175.831] (II) intel(0): blueX: 0.159 blueY: 0.120   whiteX: 0.313 whiteY: 0.329
[   175.831] (II) intel(0): Manufacturer's mask: 0
[   175.831] (II) intel(0): Supported detailed timing:
[   175.831] (II) intel(0): clock: 76.8 MHz   Image Size:  344 x 194 mm
[   175.831] (II) intel(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1618 h_border: 0
[   175.831] (II) intel(0): v_active: 768  v_sync: 771  v_sync_end 776 v_blanking: 790 v_border: 0
[   175.831] (II) intel(0): Supported detailed timing:
[   175.831] (II) intel(0): clock: 51.2 MHz   Image Size:  344 x 194 mm
[   175.831] (II) intel(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1618 h_border: 0
[   175.831] (II) intel(0): v_active: 768  v_sync: 771  v_sync_end 776 v_blanking: 790 v_border: 0
[   175.831] (II) intel(0):  N3KMPЂ156WH3
[   175.831] (II) intel(0): Unknown vendor-specific block 0
[   175.831] (II) intel(0): EDID (in hex):
[   175.831] (II) intel(0): 	00ffffffffffff0030e4ab0300000000
[   175.831] (II) intel(0): 	00160104902213780a05f59458569228
[   175.831] (II) intel(0): 	1e505400000001010101010101010101
[   175.831] (II) intel(0): 	010101010101fb1d56fc500016303020
[   175.831] (II) intel(0): 	350058c21000001afc1356fc50001630
[   175.831] (II) intel(0): 	3020350058c21000001a000000fe004e
[   175.831] (II) intel(0): 	334b4d50803135365748330a00000000
[   175.831] (II) intel(0): 	00004131940010000001010a202000d0
[   175.831] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[   175.831] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[   175.831] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[   175.831] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[   175.831] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[   175.831] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[   175.831] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[   175.832] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[   175.832] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[   175.832] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[   175.832] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[   175.832] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[   175.832] (II) intel(0): Printing probed modes for output LVDS1
[   175.832] (II) intel(0): Modeline "1366x768"x60.0   76.75  1366 1414 1446 1618  768 771 776 790 +hsync -vsync (47.4 kHz eP)
[   175.832] (II) intel(0): Modeline "1366x768"x40.0   51.16  1366 1414 1446 1618  768 771 776 790 +hsync -vsync (31.6 kHz e)
[   175.832] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[   175.832] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[   175.832] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[   175.832] (II) intel(0): Modeline "768x576"x100.0   63.07  768 800 960 1024  576 578 590 616 (61.6 kHz)
[   175.832] (II) intel(0): Modeline "768x576"x79.4   50.00  768 832 846 1000  576 590 595 630 (50.0 kHz)
[   175.832] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[   175.848] (II) intel(0): EDID for output VGA1
[   175.848] (II) intel(0): EDID for output HDMI1
[   175.848] (II) intel(0): EDID for output DP1
[   175.848] (II) intel(0): Output LVDS1 connected
[   175.848] (II) intel(0): Output VGA1 disconnected
[   175.848] (II) intel(0): Output HDMI1 disconnected
[   175.848] (II) intel(0): Output DP1 disconnected
[   175.848] (II) intel(0): Using exact sizes for initial modes
[   175.848] (II) intel(0): Output LVDS1 using initial mode 1366x768
[   175.848] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[   175.848] (II) intel(0): Kernel page flipping support detected, enabling
[   175.848] (==) intel(0): DPI set to (96, 96)
[   175.848] (II) Loading sub module "fb"
[   175.848] (II) LoadModule: "fb"
[   175.848] (II) Loading /usr/lib64/xorg/modules/libfb.so
[   175.896] (II) Module fb: vendor="X.Org Foundation"
[   175.896] 	compiled for 1.13.4, module version = 1.0.0
[   175.896] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   175.896] (II) Loading sub module "dri2"
[   175.896] (II) LoadModule: "dri2"
[   175.896] (II) Module "dri2" already built-in
[   175.896] (==) Depth 24 pixmap format is 32 bpp
[   175.897] (II) intel(0): [DRI2] Setup complete
[   175.898] (II) intel(0): [DRI2]   DRI driver: i965
[   175.898] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[   175.901] (II) UXA(0): Driver registered support for the following operations:
[   175.901] (II)         solid
[   175.901] (II)         copy
[   175.901] (II)         composite (RENDER acceleration)
[   175.901] (II)         put_image
[   175.901] (II)         get_image
[   175.901] (==) intel(0): Backing store disabled
[   175.901] (==) intel(0): Silken mouse enabled
[   175.902] (II) intel(0): Initializing HW Cursor
[   175.902] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[   175.903] (**) intel(0): DPMS enabled
[   175.903] (==) intel(0): Intel XvMC decoder enabled
[   175.946] (II) intel(0): Set up textured video
[   175.946] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[   175.946] (II) intel(0): direct rendering: DRI2 Enabled
[   175.946] (==) intel(0): hotplug detection: "enabled"
[   175.967] (--) RandR disabled
[   176.006] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[   176.006] (II) AIGLX: enabled GLX_INTEL_swap_event
[   176.006] (II) AIGLX: enabled GLX_ARB_create_context
[   176.006] (II) AIGLX: enabled GLX_ARB_create_context_profile
[   176.006] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[   176.006] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[   176.006] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[   176.006] (II) AIGLX: Loaded and initialized i965
[   176.006] (II) GLX: Initialized DRI2 GL provider for screen 0
[   176.006] (II) intel(0): Setting screen physical size to 361 x 203
[   176.253] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[   176.253] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   176.253] (II) LoadModule: "evdev"
[   176.253] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[   176.255] (II) Module evdev: vendor="X.Org Foundation"
[   176.255] 	compiled for 1.13.4, module version = 2.8.2
[   176.255] 	Module class: X.Org XInput Driver
[   176.255] 	ABI class: X.Org XInput driver, version 18.0
[   176.255] (II) Using input driver 'evdev' for 'Power Button'
[   176.255] (**) Power Button: always reports core events
[   176.255] (**) evdev: Power Button: Device: "/dev/input/event4"
[   176.255] (--) evdev: Power Button: Vendor 0 Product 0x1
[   176.255] (--) evdev: Power Button: Found keys
[   176.255] (II) evdev: Power Button: Configuring as keyboard
[   176.255] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[   176.255] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[   176.255] (**) Option "xkb_rules" "evdev"
[   176.255] (**) Option "xkb_model" "pc105"
[   176.255] (**) Option "xkb_layout" "us,ru"
[   176.255] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll,compose:rwin"
[   176.300] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[   176.301] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[   176.301] (II) Using input driver 'evdev' for 'Video Bus'
[   176.301] (**) Video Bus: always reports core events
[   176.301] (**) evdev: Video Bus: Device: "/dev/input/event6"
[   176.301] (--) evdev: Video Bus: Vendor 0 Product 0x6
[   176.301] (--) evdev: Video Bus: Found keys
[   176.301] (II) evdev: Video Bus: Configuring as keyboard
[   176.301] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input6/event6"
[   176.301] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[   176.301] (**) Option "xkb_rules" "evdev"
[   176.301] (**) Option "xkb_model" "pc105"
[   176.301] (**) Option "xkb_layout" "us,ru"
[   176.301] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll,compose:rwin"
[   176.302] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[   176.302] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   176.302] (II) Using input driver 'evdev' for 'Power Button'
[   176.302] (**) Power Button: always reports core events
[   176.302] (**) evdev: Power Button: Device: "/dev/input/event2"
[   176.302] (--) evdev: Power Button: Vendor 0 Product 0x1
[   176.302] (--) evdev: Power Button: Found keys
[   176.302] (II) evdev: Power Button: Configuring as keyboard
[   176.302] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0C:00/input/input2/event2"
[   176.302] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[   176.302] (**) Option "xkb_rules" "evdev"
[   176.302] (**) Option "xkb_model" "pc105"
[   176.302] (**) Option "xkb_layout" "us,ru"
[   176.302] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll,compose:rwin"
[   176.303] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[   176.304] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[   176.304] (II) Using input driver 'evdev' for 'Video Bus'
[   176.304] (**) Video Bus: always reports core events
[   176.304] (**) evdev: Video Bus: Device: "/dev/input/event5"
[   176.304] (--) evdev: Video Bus: Vendor 0 Product 0x6
[   176.304] (--) evdev: Video Bus: Found keys
[   176.304] (II) evdev: Video Bus: Configuring as keyboard
[   176.304] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2c/LNXVIDEO:00/input/input5/event5"
[   176.304] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 9)
[   176.304] (**) Option "xkb_rules" "evdev"
[   176.304] (**) Option "xkb_model" "pc105"
[   176.304] (**) Option "xkb_layout" "us,ru"
[   176.304] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll,compose:rwin"
[   176.305] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[   176.305] (II) No input driver specified, ignoring this device.
[   176.305] (II) This device may have been added with another device file.
[   176.305] (II) config/udev: Adding drm device (/dev/dri/card1)
[   176.306] (II) config/udev: Adding drm device (/dev/dri/card0)
[   176.306] (II) config/udev: Adding input device Laptop_Integrated_Webcam_HD (/dev/input/event12)
[   176.306] (**) Laptop_Integrated_Webcam_HD: Applying InputClass "evdev keyboard catchall"
[   176.307] (II) Using input driver 'evdev' for 'Laptop_Integrated_Webcam_HD'
[   176.307] (**) Laptop_Integrated_Webcam_HD: always reports core events
[   176.307] (**) evdev: Laptop_Integrated_Webcam_HD: Device: "/dev/input/event12"
[   176.307] (--) evdev: Laptop_Integrated_Webcam_HD: Vendor 0xbda Product 0x58c2
[   176.307] (--) evdev: Laptop_Integrated_Webcam_HD: Found keys
[   176.307] (II) evdev: Laptop_Integrated_Webcam_HD: Configuring as keyboard
[   176.307] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input12/event12"
[   176.307] (II) XINPUT: Adding extended input device "Laptop_Integrated_Webcam_HD" (type: KEYBOARD, id 10)
[   176.307] (**) Option "xkb_rules" "evdev"
[   176.307] (**) Option "xkb_model" "pc105"
[   176.307] (**) Option "xkb_layout" "us,ru"
[   176.307] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll,compose:rwin"
[   176.308] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
[   176.308] (II) No input driver specified, ignoring this device.
[   176.308] (II) This device may have been added with another device file.
[   176.308] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event10)
[   176.308] (II) No input driver specified, ignoring this device.
[   176.308] (II) This device may have been added with another device file.
[   176.309] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event11)
[   176.309] (II) No input driver specified, ignoring this device.
[   176.309] (II) This device may have been added with another device file.
[   176.309] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event9)
[   176.309] (II) No input driver specified, ignoring this device.
[   176.309] (II) This device may have been added with another device file.
[   176.310] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[   176.310] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[   176.310] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[   176.310] (**) AT Translated Set 2 keyboard: always reports core events
[   176.310] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[   176.310] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[   176.310] (--) evdev: AT Translated Set 2 keyboard: Found keys
[   176.310] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[   176.310] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[   176.310] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[   176.310] (**) Option "xkb_rules" "evdev"
[   176.310] (**) Option "xkb_model" "pc105"
[   176.310] (**) Option "xkb_layout" "us,ru"
[   176.310] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll,compose:rwin"
[   176.311] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event1)
[   176.312] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[   176.312] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[   176.312] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[   176.312] (II) LoadModule: "synaptics"
[   176.312] (II) Loading /usr/lib64/xorg/modules/input/synaptics_drv.so
[   176.313] (II) Module synaptics: vendor="X.Org Foundation"
[   176.313] 	compiled for 1.13.4, module version = 1.7.1
[   176.314] 	Module class: X.Org XInput Driver
[   176.314] 	ABI class: X.Org XInput driver, version 18.0
[   176.314] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[   176.314] (**) SynPS/2 Synaptics TouchPad: always reports core events
[   176.314] (**) Option "Device" "/dev/input/event1"
[   176.336] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5674 (res 44)
[   176.336] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4754 (res 68)
[   176.336] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[   176.336] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[   176.336] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[   176.336] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[   176.336] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[   176.336] (**) SynPS/2 Synaptics TouchPad: always reports core events
[   176.346] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input1/event1"
[   176.346] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
[   176.346] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[   176.346] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[   176.346] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.037
[   176.347] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[   176.347] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[   176.347] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[   176.347] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[   176.347] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[   176.348] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[   176.348] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[   176.349] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event8)
[   176.349] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[   176.349] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
[   176.349] (**) Dell WMI hotkeys: always reports core events
[   176.349] (**) evdev: Dell WMI hotkeys: Device: "/dev/input/event8"
[   176.349] (--) evdev: Dell WMI hotkeys: Vendor 0 Product 0
[   176.349] (--) evdev: Dell WMI hotkeys: Found keys
[   176.349] (II) evdev: Dell WMI hotkeys: Configuring as keyboard
[   176.349] (**) Option "config_info" "udev:/sys/devices/virtual/input/input8/event8"
[   176.349] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 13)
[   176.349] (**) Option "xkb_rules" "evdev"
[   176.349] (**) Option "xkb_model" "pc105"
[   176.349] (**) Option "xkb_layout" "us,ru"
[   176.350] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll,compose:rwin"
[   181.343] (II) intel(0): EDID vendor "LGD", prod id 939
[   181.344] (II) intel(0): Printing DDC gathered Modelines:
[   181.344] (II) intel(0): Modeline "1366x768"x0.0   76.75  1366 1414 1446 1618  768 771 776 790 +hsync -vsync (47.4 kHz eP)
[   181.344] (II) intel(0): Modeline "1366x768"x0.0   51.16  1366 1414 1446 1618  768 771 776 790 +hsync -vsync (31.6 kHz e)
[   182.962] (II) intel(0): EDID vendor "LGD", prod id 939
[   182.962] (II) intel(0): Printing DDC gathered Modelines:
[   182.962] (II) intel(0): Modeline "1366x768"x0.0   76.75  1366 1414 1446 1618  768 771 776 790 +hsync -vsync (47.4 kHz eP)
[   182.962] (II) intel(0): Modeline "1366x768"x0.0   51.16  1366 1414 1446 1618  768 771 776 790 +hsync -vsync (31.6 kHz e)
[   188.751] (II) intel(0): EDID vendor "LGD", prod id 939
[   188.751] (II) intel(0): Printing DDC gathered Modelines:
[   188.751] (II) intel(0): Modeline "1366x768"x0.0   76.75  1366 1414 1446 1618  768 771 776 790 +hsync -vsync (47.4 kHz eP)
[   188.751] (II) intel(0): Modeline "1366x768"x0.0   51.16  1366 1414 1446 1618  768 771 776 790 +hsync -vsync (31.6 kHz e)
[  6122.552] (II) Server zapped. Shutting down.
[  6122.696] (II) evdev: Dell WMI hotkeys: Close
[  6122.696] (II) UnloadModule: "evdev"
[  6122.696] (II) UnloadModule: "synaptics"
[  6122.696] (II) evdev: AT Translated Set 2 keyboard: Close
[  6122.696] (II) UnloadModule: "evdev"
[  6122.696] (II) evdev: Laptop_Integrated_Webcam_HD: Close
[  6122.696] (II) UnloadModule: "evdev"
[  6122.696] (II) evdev: Video Bus: Close
[  6122.696] (II) UnloadModule: "evdev"
[  6122.696] (II) evdev: Power Button: Close
[  6122.696] (II) UnloadModule: "evdev"
[  6122.696] (II) evdev: Video Bus: Close
[  6122.696] (II) UnloadModule: "evdev"
[  6122.696] (II) evdev: Power Button: Close
[  6122.696] (II) UnloadModule: "evdev"
[  6123.355] Server terminated successfully (0). Closing log file.
[code/]

а вот вывод dmesg:
[code][   175.765] 
X.Org X Server 1.13.4
Release Date: 2013-04-17
[   175.765] X Protocol Version 11, Revision 0
[   175.766] Build Operating System: Linux_3.6.7-nrj-desktop-1rosa mandriva
[   175.766] Current Operating System: Linux dell-notebook 3.10.9-nrj-desktop-1rosa #1 SMP PREEMPT Tue Aug 27 19:36:40 MSK 2013 x86_64
[   175.766] Kernel command line: BOOT_IMAGE=/vmlinuz-3.10.9-nrj-desktop-1rosa root=UUID=dfbab785-a805-49cd-b28b-941a505e251e ro splash=silent logo.nologo resume=/dev/sda1 init=/lib/systemd/systemd
[   175.766] Build Date: 29 July 2013  04:21:09PM
[   175.766]  
[   175.766] Current version of pixman: 0.28.2
[   175.766] 	Before reporting problems, check http://qa.mandriva.com
	to make sure that you have the latest version.
[   175.766] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   175.767] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Oct 21 18:54:31 2013
[   175.772] (==) Using config file: "/etc/X11/xorg.conf"
[   175.772] (==) Using config directory: "/etc/X11/xorg.conf.d"
[   175.772] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   175.774] (==) ServerLayout "layout1"
[   175.774] (**) |-->Screen "screen1" (0)
[   175.774] (**) |   |-->Monitor "monitor1"
[   175.775] (**) |   |-->Device "device1"
[   175.775] (**) Option "DontZap" "False"
[   175.775] (**) Option "AllowMouseOpenFail"
[   175.775] (==) Automatically adding devices
[   175.775] (==) Automatically enabling devices
[   175.775] (==) Automatically adding GPU devices
[   175.775] (==) FontPath set to:
	catalogue:/etc/X11/fontpath.d
[   175.776] (==) ModulePath set to "/usr/lib64/xorg/extra-modules,/usr/lib64/xorg/modules"
[   175.776] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[   175.776] (II) Loader magic: 0x7fdc20
[   175.776] (II) Module ABI versions:
[   175.776] 	X.Org ANSI C Emulation: 0.4
[   175.776] 	X.Org Video Driver: 13.1
[   175.776] 	X.Org XInput driver : 18.0
[   175.776] 	X.Org Server Extension : 7.0
[   175.776] (II) config/udev: Adding drm device (/dev/dri/card1)
[   175.776] (II) config/udev: Adding drm device (/dev/dri/card0)
[   175.778] (--) PCI:*(0:0:2:0) 8086:0166:1028:0598 rev 9, Mem @ 0xc1000000/4194304, 0xb0000000/268435456, I/O @ 0x00004000/64
[   175.778] (--) PCI: (0:1:0:0) 1002:6840:1028:0598 rev 0, Mem @ 0xa0000000/268435456, 0xc0000000/131072, I/O @ 0x00003000/256, BIOS @ 0x????????/131072
[   175.778] (II) Open ACPI successful (/var/run/acpid.socket)
[   175.779] Initializing built-in extension Generic Event Extension
[   175.779] Initializing built-in extension SHAPE
[   175.779] Initializing built-in extension MIT-SHM
[   175.779] Initializing built-in extension XInputExtension
[   175.779] Initializing built-in extension XTEST
[   175.779] Initializing built-in extension BIG-REQUESTS
[   175.779] Initializing built-in extension SYNC
[   175.779] Initializing built-in extension XKEYBOARD
[   175.779] Initializing built-in extension XC-MISC
[   175.781] Initializing built-in extension SECURITY
[   175.782] Initializing built-in extension XINERAMA
[   175.783] Initializing built-in extension XFIXES
[   175.784] Initializing built-in extension XFree86-Bigfont
[   175.785] Initializing built-in extension RENDER
[   175.786] Initializing built-in extension RANDR
[   175.787] Initializing built-in extension COMPOSITE
[   175.788] Initializing built-in extension DAMAGE
[   175.789] Initializing built-in extension MIT-SCREEN-SAVER
[   175.790] Initializing built-in extension DOUBLE-BUFFER
[   175.791] Initializing built-in extension RECORD
[   175.792] Initializing built-in extension DPMS
[   175.793] Initializing built-in extension X-Resource
[   175.794] Initializing built-in extension XVideo
[   175.795] Initializing built-in extension XVideo-MotionCompensation
[   175.796] Initializing built-in extension XFree86-VidModeExtension
[   175.797] Initializing built-in extension XFree86-DGA
[   175.798] Initializing built-in extension XFree86-DRI
[   175.798] Initializing built-in extension DRI2
[   175.798] (II) "glx" will be loaded by default.
[   175.798] (II) LoadModule: "v4l"
[   175.801] (II) Loading /usr/lib64/xorg/modules/drivers/v4l_drv.so
[   175.802] (II) Module v4l: vendor="X.Org Foundation"
[   175.802] 	compiled for 1.13.0, module version = 0.1.1
[   175.802] 	ABI class: X.Org Video Driver, version 13.0
[   175.802] (II) LoadModule: "glx"
[   175.802] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[   175.805] (II) Module glx: vendor="X.Org Foundation"
[   175.805] 	compiled for 1.13.4, module version = 1.0.0
[   175.805] 	ABI class: X.Org Server Extension, version 7.0
[   175.805] (==) AIGLX enabled
[   175.808] Loading extension GLX
[   175.808] (II) LoadModule: "intel"
[   175.808] (II) Loading /usr/lib64/xorg/modules/drivers/intel_drv.so
[   175.813] (II) Module intel: vendor="X.Org Foundation"
[   175.813] 	compiled for 1.13.2, module version = 2.21.6
[   175.813] 	Module class: X.Org Video Driver
[   175.813] 	ABI class: X.Org Video Driver, version 13.1
[   175.813] (II) v4l driver for Video4Linux
[   175.813] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
	i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
	E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
	965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
	4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
	Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
	Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
	Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
	Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
	Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
	Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
	Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
	Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
	Haswell Server (GT2+), Haswell SDV Desktop (GT1),
	Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
	Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
	Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
	Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
	Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
	Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
	Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
	Haswell ULT Server (GT1), Haswell ULT Server (GT2),
	Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
	Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
	Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
	Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
	Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
	ValleyView PO board
[   175.813] (++) using VT number 1

[   175.813] (WW) Falling back to old probe method for v4l
[   175.814] (II) intel(0): Creating default Display subsection in Screen section
	"screen1" for depth/fbbpp 24/32
[   175.814] (**) intel(0): Depth 24, (--) framebuffer bpp 32
[   175.814] (==) intel(0): RGB weight 888
[   175.814] (==) intel(0): Default visual is TrueColor
[   175.814] (--) intel(0): Integrated Graphics Chipset: Intel(R) Ivybridge Mobile (GT2)
[   175.814] (**) intel(0): Relaxed fencing enabled
[   175.814] (**) intel(0): Wait on SwapBuffers? enabled
[   175.814] (**) intel(0): Triple buffering? enabled
[   175.814] (**) intel(0): Framebuffer tiled
[   175.814] (**) intel(0): Pixmaps tiled
[   175.814] (**) intel(0): 3D buffers tiled
[   175.814] (**) intel(0): SwapBuffers wait enabled
[   175.814] (==) intel(0): video overlay key set to 0x101fe
[   175.814] (II) intel(0): Output LVDS1 using monitor section monitor1
[   175.815] (--) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[   175.831] (II) intel(0): Output VGA1 has no monitor section
[   175.831] (II) intel(0): Output HDMI1 has no monitor section
[   175.831] (II) intel(0): Output DP1 has no monitor section
[   175.831] (II) intel(0): EDID for output LVDS1
[   175.831] (II) intel(0): Manufacturer: LGD  Model: 3ab  Serial#: 0
[   175.831] (II) intel(0): Year: 2012  Week: 0
[   175.831] (II) intel(0): EDID Version: 1.4
[   175.831] (II) intel(0): Digital Display Input
[   175.831] (II) intel(0): 6 bits per channel
[   175.831] (II) intel(0): Digital interface is undefined
[   175.831] (II) intel(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[   175.831] (II) intel(0): Gamma: 2.20
[   175.831] (II) intel(0): No DPMS capabilities specified
[   175.831] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[   175.831] (II) intel(0): First detailed timing is preferred mode
[   175.831] (II) intel(0): Preferred mode is native pixel format and refresh rate
[   175.831] (II) intel(0): redX: 0.578 redY: 0.344   greenX: 0.337 greenY: 0.571
[   175.831] (II) intel(0): blueX: 0.159 blueY: 0.120   whiteX: 0.313 whiteY: 0.329
[   175.831] (II) intel(0): Manufacturer's mask: 0
[   175.831] (II) intel(0): Supported detailed timing:
[   175.831] (II) intel(0): clock: 76.8 MHz   Image Size:  344 x 194 mm
[   175.831] (II) intel(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1618 h_border: 0
[   175.831] (II) intel(0): v_active: 768  v_sync: 771  v_sync_end 776 v_blanking: 790 v_border: 0
[   175.831] (II) intel(0): Supported detailed timing:
[   175.831] (II) intel(0): clock: 51.2 MHz   Image Size:  344 x 194 mm
[   175.831] (II) intel(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1618 h_border: 0
[   175.831] (II) intel(0): v_active: 768  v_sync: 771  v_sync_end 776 v_blanking: 790 v_border: 0
[   175.831] (II) intel(0):  N3KMPЂ156WH3
[   175.831] (II) intel(0): Unknown vendor-specific block 0
[   175.831] (II) intel(0): EDID (in hex):
[   175.831] (II) intel(0): 	00ffffffffffff0030e4ab0300000000
[   175.831] (II) intel(0): 	00160104902213780a05f59458569228
[   175.831] (II) intel(0): 	1e505400000001010101010101010101
[   175.831] (II) intel(0): 	010101010101fb1d56fc500016303020
[   175.831] (II) intel(0): 	350058c21000001afc1356fc50001630
[   175.831] (II) intel(0): 	3020350058c21000001a000000fe004e
[   175.831] (II) intel(0): 	334b4d50803135365748330a00000000
[   175.831] (II) intel(0): 	00004131940010000001010a202000d0
[   175.831] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[   175.831] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[   175.831] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[   175.831] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[   175.831] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[   175.831] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[   175.831] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[   175.832] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[   175.832] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[   175.832] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[   175.832] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[   175.832] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[   175.832] (II) intel(0): Printing probed modes for output LVDS1
[   175.832] (II) intel(0): Modeline "1366x768"x60.0   76.75  1366 1414 1446 1618  768 771 776 790 +hsync -vsync (47.4 kHz eP)
[   175.832] (II) intel(0): Modeline "1366x768"x40.0   51.16  1366 1414 1446 1618  768 771 776 790 +hsync -vsync (31.6 kHz e)
[   175.832] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[   175.832] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[   175.832] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[   175.832] (II) intel(0): Modeline "768x576"x100.0   63.07  768 800 960 1024  576 578 590 616 (61.6 kHz)
[   175.832] (II) intel(0): Modeline "768x576"x79.4   50.00  768 832 846 1000  576 590 595 630 (50.0 kHz)
[   175.832] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[   175.848] (II) intel(0): EDID for output VGA1
[   175.848] (II) intel(0): EDID for output HDMI1
[   175.848] (II) intel(0): EDID for output DP1
[   175.848] (II) intel(0): Output LVDS1 connected
[   175.848] (II) intel(0): Output VGA1 disconnected
[   175.848] (II) intel(0): Output HDMI1 disconnected
[   175.848] (II) intel(0): Output DP1 disconnected
[   175.848] (II) intel(0): Using exact sizes for initial modes
[   175.848] (II) intel(0): Output LVDS1 using initial mode 1366x768
[   175.848] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[   175.848] (II) intel(0): Kernel page flipping support detected, enabling
[   175.848] (==) intel(0): DPI set to (96, 96)
[   175.848] (II) Loading sub module "fb"
[   175.848] (II) LoadModule: "fb"
[   175.848] (II) Loading /usr/lib64/xorg/modules/libfb.so
[   175.896] (II) Module fb: vendor="X.Org Foundation"
[   175.896] 	compiled for 1.13.4, module version = 1.0.0
[   175.896] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   175.896] (II) Loading sub module "dri2"
[   175.896] (II) LoadModule: "dri2"
[   175.896] (II) Module "dri2" already built-in
[   175.896] (==) Depth 24 pixmap format is 32 bpp
[   175.897] (II) intel(0): [DRI2] Setup complete
[   175.898] (II) intel(0): [DRI2]   DRI driver: i965
[   175.898] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[   175.901] (II) UXA(0): Driver registered support for the following operations:
[   175.901] (II)         solid
[   175.901] (II)         copy
[   175.901] (II)         composite (RENDER acceleration)
[   175.901] (II)         put_image
[   175.901] (II)         get_image
[   175.901] (==) intel(0): Backing store disabled
[   175.901] (==) intel(0): Silken mouse enabled
[   175.902] (II) intel(0): Initializing HW Cursor
[   175.902] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[   175.903] (**) intel(0): DPMS enabled
[   175.903] (==) intel(0): Intel XvMC decoder enabled
[   175.946] (II) intel(0): Set up textured video
[   175.946] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[   175.946] (II) intel(0): direct rendering: DRI2 Enabled
[   175.946] (==) intel(0): hotplug detection: "enabled"
[   175.967] (--) RandR disabled
[   176.006] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[   176.006] (II) AIGLX: enabled GLX_INTEL_swap_event
[   176.006] (II) AIGLX: enabled GLX_ARB_create_context
[   176.006] (II) AIGLX: enabled GLX_ARB_create_context_profile
[   176.006] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[   176.006] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[   176.006] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[   176.006] (II) AIGLX: Loaded and initialized i965
[   176.006] (II) GLX: Initialized DRI2 GL provider for screen 0
[   176.006] (II) intel(0): Setting screen physical size to 361 x 203
[   176.253] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[   176.253] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   176.253] (II) LoadModule: "evdev"
[   176.253] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[   176.255] (II) Module evdev: vendor="X.Org Foundation"
[   176.255] 	compiled for 1.13.4, module version = 2.8.2
[   176.255] 	Module class: X.Org XInput Driver
[   176.255] 	ABI class: X.Org XInput driver, version 18.0
[   176.255] (II) Using input driver 'evdev' for 'Power Button'
[   176.255] (**) Power Button: always reports core events
[   176.255] (**) evdev: Power Button: Device: "/dev/input/event4"
[   176.255] (--) evdev: Power Button: Vendor 0 Product 0x1
[   176.255] (--) evdev: Power Button: Found keys
[   176.255] (II) evdev: Power Button: Configuring as keyboard
[   176.255] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[   176.255] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[   176.255] (**) Option "xkb_rules" "evdev"
[   176.255] (**) Option "xkb_model" "pc105"
[   176.255] (**) Option "xkb_layout" "us,ru"
[   176.255] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll,compose:rwin"
[   176.300] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[   176.301] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[   176.301] (II) Using input driver 'evdev' for 'Video Bus'
[   176.301] (**) Video Bus: always reports core events
[   176.301] (**) evdev: Video Bus: Device: "/dev/input/event6"
[   176.301] (--) evdev: Video Bus: Vendor 0 Product 0x6
[   176.301] (--) evdev: Video Bus: Found keys
[   176.301] (II) evdev: Video Bus: Configuring as keyboard
[   176.301] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input6/event6"
[   176.301] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[   176.301] (**) Option "xkb_rules" "evdev"
[   176.301] (**) Option "xkb_model" "pc105"
[   176.301] (**) Option "xkb_layout" "us,ru"
[   176.301] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll,compose:rwin"
[   176.302] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[   176.302] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   176.302] (II) Using input driver 'evdev' for 'Power Button'
[   176.302] (**) Power Button: always reports core events
[   176.302] (**) evdev: Power Button: Device: "/dev/input/event2"
[   176.302] (--) evdev: Power Button: Vendor 0 Product 0x1
[   176.302] (--) evdev: Power Button: Found keys
[   176.302] (II) evdev: Power Button: Configuring as keyboard
[   176.302] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0C:00/input/input2/event2"
[   176.302] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[   176.302] (**) Option "xkb_rules" "evdev"
[   176.302] (**) Option "xkb_model" "pc105"
[   176.302] (**) Option "xkb_layout" "us,ru"
[   176.302] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll,compose:rwin"
[   176.303] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[   176.304] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[   176.304] (II) Using input driver 'evdev' for 'Video Bus'
[   176.304] (**) Video Bus: always reports core events
[   176.304] (**) evdev: Video Bus: Device: "/dev/input/event5"
[   176.304] (--) evdev: Video Bus: Vendor 0 Product 0x6
[   176.304] (--) evdev: Video Bus: Found keys
[   176.304] (II) evdev: Video Bus: Configuring as keyboard
[   176.304] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2c/LNXVIDEO:00/input/input5/event5"
[   176.304] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 9)
[   176.304] (**) Option "xkb_rules" "evdev"
[   176.304] (**) Option "xkb_model" "pc105"
[   176.304] (**) Option "xkb_layout" "us,ru"
[   176.304] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll,compose:rwin"
[   176.305] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[   176.305] (II) No input driver specified, ignoring this device.
[   176.305] (II) This device may have been added with another device file.
[   176.305] (II) config/udev: Adding drm device (/dev/dri/card1)
[   176.306] (II) config/udev: Adding drm device (/dev/dri/card0)
[   176.306] (II) config/udev: Adding input device Laptop_Integrated_Webcam_HD (/dev/input/event12)
[   176.306] (**) Laptop_Integrated_Webcam_HD: Applying InputClass "evdev keyboard catchall"
[   176.307] (II) Using input driver 'evdev' for 'Laptop_Integrated_Webcam_HD'
[   176.307] (**) Laptop_Integrated_Webcam_HD: always reports core events
[   176.307] (**) evdev: Laptop_Integrated_Webcam_HD: Device: "/dev/input/event12"
[   176.307] (--) evdev: Laptop_Integrated_Webcam_HD: Vendor 0xbda Product 0x58c2
[   176.307] (--) evdev: Laptop_Integrated_Webcam_HD: Found keys
[   176.307] (II) evdev: Laptop_Integrated_Webcam_HD: Configuring as keyboard
[   176.307] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input12/event12"
[   176.307] (II) XINPUT: Adding extended input device "Laptop_Integrated_Webcam_HD" (type: KEYBOARD, id 10)
[   176.307] (**) Option "xkb_rules" "evdev"
[   176.307] (**) Option "xkb_model" "pc105"
[   176.307] (**) Option "xkb_layout" "us,ru"
[   176.307] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll,compose:rwin"
[   176.308] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
[   176.308] (II) No input driver specified, ignoring this device.
[   176.308] (II) This device may have been added with another device file.
[   176.308] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event10)
[   176.308] (II) No input driver specified, ignoring this device.
[   176.308] (II) This device may have been added with another device file.
[   176.309] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event11)
[   176.309] (II) No input driver specified, ignoring this device.
[   176.309] (II) This device may have been added with another device file.
[   176.309] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event9)
[   176.309] (II) No input driver specified, ignoring this device.
[   176.309] (II) This device may have been added with another device file.
[   176.310] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[   176.310] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[   176.310] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[   176.310] (**) AT Translated Set 2 keyboard: always reports core events
[   176.310] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[   176.310] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[   176.310] (--) evdev: AT Translated Set 2 keyboard: Found keys
[   176.310] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[   176.310] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[   176.310] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[   176.310] (**) Option "xkb_rules" "evdev"
[   176.310] (**) Option "xkb_model" "pc105"
[   176.310] (**) Option "xkb_layout" "us,ru"
[   176.310] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll,compose:rwin"
[   176.311] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event1)
[   176.312] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[   176.312] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[   176.312] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[   176.312] (II) LoadModule: "synaptics"
[   176.312] (II) Loading /usr/lib64/xorg/modules/input/synaptics_drv.so
[   176.313] (II) Module synaptics: vendor="X.Org Foundation"
[   176.313] 	compiled for 1.13.4, module version = 1.7.1
[   176.314] 	Module class: X.Org XInput Driver
[   176.314] 	ABI class: X.Org XInput driver, version 18.0
[   176.314] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[   176.314] (**) SynPS/2 Synaptics TouchPad: always reports core events
[   176.314] (**) Option "Device" "/dev/input/event1"
[   176.336] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5674 (res 44)
[   176.336] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4754 (res 68)
[   176.336] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[   176.336] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[   176.336] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[   176.336] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[   176.336] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[   176.336] (**) SynPS/2 Synaptics TouchPad: always reports core events
[   176.346] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input1/event1"
[   176.346] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
[   176.346] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[   176.346] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[   176.346] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.037
[   176.347] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[   176.347] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[   176.347] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[   176.347] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[   176.347] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[   176.348] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[   176.348] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[   176.349] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event8)
[   176.349] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[   176.349] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
[   176.349] (**) Dell WMI hotkeys: always reports core events
[   176.349] (**) evdev: Dell WMI hotkeys: Device: "/dev/input/event8"
[   176.349] (--) evdev: Dell WMI hotkeys: Vendor 0 Product 0
[   176.349] (--) evdev: Dell WMI hotkeys: Found keys
[   176.349] (II) evdev: Dell WMI hotkeys: Configuring as keyboard
[   176.349] (**) Option "config_info" "udev:/sys/devices/virtual/input/input8/event8"
[   176.349] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 13)
[   176.349] (**) Option "xkb_rules" "evdev"
[   176.349] (**) Option "xkb_model" "pc105"
[   176.349] (**) Option "xkb_layout" "us,ru"
[   176.350] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll,compose:rwin"
[   181.343] (II) intel(0): EDID vendor "LGD", prod id 939
[   181.344] (II) intel(0): Printing DDC gathered Modelines:
[   181.344] (II) intel(0): Modeline "1366x768"x0.0   76.75  1366 1414 1446 1618  768 771 776 790 +hsync -vsync (47.4 kHz eP)
[   181.344] (II) intel(0): Modeline "1366x768"x0.0   51.16  1366 1414 1446 1618  768 771 776 790 +hsync -vsync (31.6 kHz e)
[   182.962] (II) intel(0): EDID vendor "LGD", prod id 939
[   182.962] (II) intel(0): Printing DDC gathered Modelines:
[   182.962] (II) intel(0): Modeline "1366x768"x0.0   76.75  1366 1414 1446 1618  768 771 776 790 +hsync -vsync (47.4 kHz eP)
[   182.962] (II) intel(0): Modeline "1366x768"x0.0   51.16  1366 1414 1446 1618  768 771 776 790 +hsync -vsync (31.6 kHz e)
[   188.751] (II) intel(0): EDID vendor "LGD", prod id 939
[   188.751] (II) intel(0): Printing DDC gathered Modelines:
[   188.751] (II) intel(0): Modeline "1366x768"x0.0   76.75  1366 1414 1446 1618  768 771 776 790 +hsync -vsync (47.4 kHz eP)
[   188.751] (II) intel(0): Modeline "1366x768"x0.0   51.16  1366 1414 1446 1618  768 771 776 790 +hsync -vsync (31.6 kHz e)
Вернуться к началу
Аватара пользователя
akdengi
Сообщения: 1381
Зарегистрирован: 12 сен 2011, 13:44

Re: После обновления не запускаются X-ы.

Сообщение akdengi » 21 окт 2013, 21:08

У вас сейчас включена интеловская видеокарточка, поэтому нужно руками удалить /etc/X11/xorg.conf и убрать из строки загрузки /etc/grub2.cfg nomodeset.

Или переключить на AMD в BIOS по умолчанию.
Вернуться к началу
xruss
Сообщения: 169
Зарегистрирован: 24 апр 2013, 15:38
Operating system: ROSA DESKTOP

Re: После обновления не запускаются X-ы.

Сообщение xruss » 22 окт 2013, 23:02

akdengi писал(а):удалить /etc/X11/xorg.conf
удалил.
akdengi писал(а):убрать из строки загрузки /etc/grub2.cfg nomodeset.
Или переключить на AMD в BIOS по умолчанию.
пробовал переключить, но не могу найти где переключается((
строки с nomodeset не нашел vi пишет, что не найден паттерн :oops:
в итоге от рута запускается, а от пользователя нет.
сегодня обновлял пакеты, увидел пакет для моей модели Dell, однако пока что ничего не помогло(
Вернуться к началу
xruss
Сообщения: 169
Зарегистрирован: 24 апр 2013, 15:38
Operating system: ROSA DESKTOP

Re: После обновления не запускаются X-ы.

Сообщение xruss » 23 окт 2013, 10:53

отсутствие строки nomodeset наверное связано с тем, что у меня не обновился grub2 - не хватило места в /boot (я вручную размечал диск). Сейчас еще раз переустановил систему, обновляю пакеты. может ошибка уйдет)
Вернуться к началу
NicCo
Сообщения: 281
Зарегистрирован: 06 май 2012, 20:37

Re: После обновления не запускаются X-ы.

Сообщение NicCo » 23 окт 2013, 11:21

Same problem here (with ROSA Fresh R1 x86_64 and updates)
A new install with Nvidia 8300, after switching to nvidia-current they don't work,
so I try to go back to open driver, and same problem of the first published photo

I can't use proprietary drivers and I neither cant go back to the "open driver"...
(I've already formatted and tried reinstalling 3 times in a row, always the same error:
When you try to install a proprietary driver, it seems no longer possible to go back...)
Вернуться к началу
Аватара пользователя
akdengi
Сообщения: 1381
Зарегистрирован: 12 сен 2011, 13:44

Re: После обновления не запускаются X-ы.

Сообщение akdengi » 23 окт 2013, 14:22

Совсем забыл :(

Надо переключить gl_conf в альтернативесах еще:

update-alternatives --config gl_conf и поставить его на простой (обычно 1-й) вместо ATI.
Вернуться к началу
xruss
Сообщения: 169
Зарегистрирован: 24 апр 2013, 15:38
Operating system: ROSA DESKTOP

Re: После обновления не запускаются X-ы.

Сообщение xruss » 23 окт 2013, 21:11

попробовал от пользователя, а на выходе получил сообщение:
There is one alternative in link group gl_conf (providing /etc/ld.so.conf.d/GL.conf): /etc/ld.so.conf.d/GL/standart.conf Nothing to configure.

ничего не помогает - X-ы запускаются только от рута((
Вернуться к началу
Аватара пользователя
VictorR2007
Сообщения: 7273
Зарегистрирован: 12 сен 2011, 13:00
Operating system: ROSA 2023.1

Re: После обновления не запускаются X-ы.

Сообщение VictorR2007 » 23 окт 2013, 21:20

xruss писал(а):попробовал от пользователя, а на выходе получил сообщение:
There is one alternative in link group gl_conf (providing /etc/ld.so.conf.d/GL.conf): /etc/ld.so.conf.d/GL/standart.conf Nothing to configure.

ничего не помогает - X-ы запускаются только от рута((
Нужно от рута.
Вернуться к началу
xruss
Сообщения: 169
Зарегистрирован: 24 апр 2013, 15:38
Operating system: ROSA DESKTOP

Re: После обновления не запускаются X-ы.

Сообщение xruss » 23 окт 2013, 21:50

в первый раз, когда я выполнял данную команду от рута, она запускалась и я мог выбрать manual или auto / а теперь такая картинка даже из под рута:
Изображение
Вернуться к началу
Аватара пользователя
VictorR2007
Сообщения: 7273
Зарегистрирован: 12 сен 2011, 13:00
Operating system: ROSA 2023.1

Re: После обновления не запускаются X-ы.

Сообщение VictorR2007 » 24 окт 2013, 01:11

У вас на скрине есть непонятная строка со словом

Код: Выделить всё

/.server
Возможно что проблема из-за старых файлов конфигурации в домашнем каталоге
и поэтому не запускается от пользователя..
Попробуйте удалить скрытые файлы, типа .Xauthority и другие подобные.
Вернуться к началу
Аватара пользователя
akdengi
Сообщения: 1381
Зарегистрирован: 12 сен 2011, 13:44

Re: После обновления не запускаются X-ы.

Сообщение akdengi » 24 окт 2013, 01:17

Посмотрите /etc/inittab

Там есть строка вида:

Код: Выделить всё

id:5:initdefault:
сразу после

Код: Выделить всё

# Default runlevel. The runlevels used by Mandriva are:
#   0 - halt (Do NOT set initdefault to this)
#   1 - Single user mode
#   2 - Multiuser, without NFS (The same as 3, if you do not have networking)
#   3 - Full multiuser mode
#   4 - unused
#   5 - X11
#   6 - reboot (Do NOT set initdefault to this)
#
?

Если нету или она другая, то поправьте или создайте.
Вернуться к началу
xruss
Сообщения: 169
Зарегистрирован: 24 апр 2013, 15:38
Operating system: ROSA DESKTOP

Re: После обновления не запускаются X-ы.

Сообщение xruss » 24 окт 2013, 11:09

VictorR2007 писал(а): Возможно что проблема из-за старых файлов конфигурации в домашнем каталоге
да, файлы были, я их записал вместе со старыми файлами. однако удаление не принесло результата - проблема сохраняется.
akdengi писал(а):Посмотрите /etc/inittab
да, там была строка вида:
id:3:initdefault:

исправил на 5-ку, но из под пользователя X-ы не грузятся. :(
Вернуться к началу
Флинт
Сообщения: 76
Зарегистрирован: 12 сен 2011, 13:51
Operating system: ROSA
Откуда: г. Арзамас, Нижегородская обл.

Re: После обновления не запускаются X-ы.

Сообщение Флинт » 24 окт 2013, 13:07

мдааа.. а у меня, похоже, совсем старый комп стал.. поставил ROSA.FRESH.KDE.R1.i586.. до обновления всё работало, а после в девяти случах из десяти, тупо виснет после ввода пароля.. мышка шевелится, а на клавиатуру не реагирует..
железка:
P4 2,4ГГц
ОЗУ 1,5ГБ
Видео Intel845
Intel(R) Core(TM) i5-3210M / 8GB RAM / Intel(R) HD Graphic 4000 / ROSA Fresh R4 x86_64
Вернуться к началу
xruss
Сообщения: 169
Зарегистрирован: 24 апр 2013, 15:38
Operating system: ROSA DESKTOP

Сообщение xruss » 24 окт 2013, 14:04

Может будет полезна информация об оборудовании и сообщениях при загрузке?:

Код: Выделить всё

[root@dell-notebook ~]# uname -a
Linux dell-notebook.localdomain 3.10.9-nrj-desktop-1rosa #1 SMP PREEMPT Tue Aug 27 19:36:40 MSK 2013 x86_64 x86_64 x86_64 GNU/Linux

Код: Выделить всё

[root@dell-notebook ~]# lspci
00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)
00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4)
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation HM76 Express Chipset LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Thames [Radeon HD 7500M/7600M Series]
07:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05)
08:00.0 Network controller: Qualcomm Atheros AR9485 Wireless Network Adapter (rev 01)
Вывод lspci -vv:

Код: Выделить всё

00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09)
	Subsystem: Dell Device 0598
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: [e0] Vendor Specific Information: Len=0c <?>

00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=01, subordinate=06, sec-latency=0
	I/O behind bridge: 00003000-00003fff
	Memory behind bridge: c0000000-c0ffffff
	Prefetchable memory behind bridge: 00000000a0000000-00000000afffffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: [88] Subsystem: Dell Device 0598
	Capabilities: [80] Power Management version 3
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
		Address: fee0f00c  Data: 4181
	Capabilities: [a0] Express (v2) Root Port (Slot+), MSI 00
		DevCap:	MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag- RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 256 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #2, Speed 5GT/s, Width x8, ASPM L0s L1, Latency L0 <256ns, L1 <8us
			ClockPM- Surprise- LLActRep- BwNot+
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 5GT/s, Width x8, TrErr- Train- SlotClk+ DLActive- BWMgmt+ ABWMgmt+
		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
			Slot #1, PowerLimit 75.000W; Interlock- NoCompl+
		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
			Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
			Changed: MRL- PresDet+ LinkState-
		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
		RootCap: CRSVisible-
		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
		DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR-, OBFF Not Supported ARIFwd-
		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
		LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
			 Compliance De-emphasis: -6dB
		LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
			 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
	Capabilities: [100 v1] Virtual Channel
		Caps:	LPEVC=0 RefClk=100ns PATEntryBits=1
		Arb:	Fixed- WRR32- WRR64- WRR128-
		Ctrl:	ArbSelect=Fixed
		Status:	InProgress-
		VC0:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
			Arb:	Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
			Ctrl:	Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
			Status:	NegoPending- InProgress-
	Capabilities: [140 v1] Root Complex Link
		Desc:	PortNumber=02 ComponentID=01 EltType=Config
		Link0:	Desc:	TargetPort=00 TargetComponent=01 AssocRCRB- LinkType=MemMapped LinkValid+
			Addr:	00000000fed19000
	Kernel driver in use: pcieport
	Kernel modules: shpchp

00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09) (prog-if 00 [VGA controller])
	Subsystem: Dell Device 0598
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 43
	Region 0: Memory at c1000000 (64-bit, non-prefetchable) [size=4M]
	Region 2: Memory at b0000000 (64-bit, prefetchable) [size=256M]
	Region 4: I/O ports at 4000 [size=64]
	Expansion ROM at <unassigned> [disabled]
	Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
		Address: fee0f00c  Data: 41c1
	Capabilities: [d0] Power Management version 2
		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [a4] PCI Advanced Features
		AFCap: TP+ FLR+
		AFCtrl: FLR-
		AFStatus: TP-
	Kernel driver in use: i915
	Kernel modules: i915

00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04) (prog-if 30 [XHCI])
	Subsystem: Dell Device 0598
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 44
	Region 0: Memory at c1600000 (64-bit, non-prefetchable) [size=64K]
	Capabilities: [70] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [80] MSI: Enable+ Count=1/8 Maskable- 64bit+
		Address: 00000000fee0f00c  Data: 41d1
	Kernel driver in use: xhci_hcd
	Kernel modules: xhci_hcd

00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
	Subsystem: Dell Device 0598
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 41
	Region 0: Memory at c1614000 (64-bit, non-prefetchable) [size=16]
	Capabilities: [50] Power Management version 3
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [8c] MSI: Enable+ Count=1/1 Maskable- 64bit+
		Address: 00000000fee0f00c  Data: 4191
	Kernel driver in use: mei_me

00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04) (prog-if 20 [EHCI])
	Subsystem: Dell Device 0598
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at c1619000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [58] Debug port: BAR=1 offset=00a0
	Capabilities: [98] PCI Advanced Features
		AFCap: TP+ FLR+
		AFCtrl: FLR-
		AFStatus: TP-
	Kernel driver in use: ehci-pci
	Kernel modules: ehci_pci

00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
	Subsystem: Dell Device 0598
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 46
	Region 0: Memory at c1610000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
		Address: 00000000fee0f00c  Data: 4142
	Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag- RBE- FLReset+
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
		LnkCap:	Port #0, Speed unknown, Width x0, ASPM not supported, Latency L0 <64ns, L1 <1us
			ClockPM- Surprise- LLActRep- BwNot-
		LnkCtl:	ASPM Disabled; Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
	Capabilities: [100 v1] Virtual Channel
		Caps:	LPEVC=0 RefClk=100ns PATEntryBits=1
		Arb:	Fixed- WRR32- WRR64- WRR128-
		Ctrl:	ArbSelect=Fixed
		Status:	InProgress-
		VC0:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
			Arb:	Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
			Ctrl:	Enable+ ID=0 ArbSelect=Fixed TC/VC=01
			Status:	NegoPending- InProgress-
		VC1:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
			Arb:	Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
			Ctrl:	Enable+ ID=1 ArbSelect=Fixed TC/VC=22
			Status:	NegoPending- InProgress-
	Capabilities: [130 v1] Root Complex Link
		Desc:	PortNumber=0f ComponentID=00 EltType=Config
		Link0:	Desc:	TargetPort=00 TargetComponent=00 AssocRCRB- LinkType=MemMapped LinkValid+
			Addr:	00000000fed1c000
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel

00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
	I/O behind bridge: 00002000-00002fff
	Prefetchable memory behind bridge: 00000000c1400000-00000000c14fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag- RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
		LnkCap:	Port #1, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <16us
			ClockPM- Surprise- LLActRep+ BwNot-
		LnkCtl:	ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
			Slot #0, PowerLimit 10.000W; Interlock- NoCompl+
		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
			Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
			Changed: MRL- PresDet- LinkState+
		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
		RootCap: CRSVisible-
		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
		DevCap2: Completion Timeout: Range BC, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd-
		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
		LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
			 Compliance De-emphasis: -6dB
		LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
			 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
	Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
		Address: 00000000  Data: 0000
	Capabilities: [90] Subsystem: Dell Device 0598
	Capabilities: [a0] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: pcieport
	Kernel modules: shpchp

00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
	Memory behind bridge: c1500000-c15fffff
	Prefetchable memory behind bridge: 000000009fb00000-000000009fbfffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag- RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
		LnkCap:	Port #2, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <16us
			ClockPM- Surprise- LLActRep+ BwNot-
		LnkCtl:	ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
			Slot #1, PowerLimit 10.000W; Interlock- NoCompl+
		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
			Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
			Changed: MRL- PresDet- LinkState+
		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
		RootCap: CRSVisible-
		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
		DevCap2: Completion Timeout: Range BC, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd-
		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
		LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
			 Compliance De-emphasis: -6dB
		LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
			 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
	Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
		Address: 00000000  Data: 0000
	Capabilities: [90] Subsystem: Dell Device 0598
	Capabilities: [a0] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: pcieport
	Kernel modules: shpchp

00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) (prog-if 20 [EHCI])
	Subsystem: Dell Device 0598
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 23
	Region 0: Memory at c1618000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [58] Debug port: BAR=1 offset=00a0
	Capabilities: [98] PCI Advanced Features
		AFCap: TP+ FLR+
		AFCtrl: FLR-
		AFStatus: TP-
	Kernel driver in use: ehci-pci
	Kernel modules: ehci_pci

00:1f.0 ISA bridge: Intel Corporation HM76 Express Chipset LPC Controller (rev 04)
	Subsystem: Dell Device 0598
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: [e0] Vendor Specific Information: Len=0c <?>
	Kernel driver in use: lpc_ich
	Kernel modules: lpc_ich

00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04) (prog-if 01 [AHCI 1.0])
	Subsystem: Dell Device 0598
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 42
	Region 0: I/O ports at 4088 [size=8]
	Region 1: I/O ports at 4094 [size=4]
	Region 2: I/O ports at 4080 [size=8]
	Region 3: I/O ports at 4090 [size=4]
	Region 4: I/O ports at 4060 [size=32]
	Region 5: Memory at c1617000 (32-bit, non-prefetchable) [size=2K]
	Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
		Address: fee0f00c  Data: 41b1
	Capabilities: [70] Power Management version 3
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004
	Capabilities: [b0] PCI Advanced Features
		AFCap: TP+ FLR+
		AFCtrl: FLR-
		AFStatus: TP-
	Kernel driver in use: ahci

00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
	Subsystem: Dell Device 0598
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin C routed to IRQ 19
	Region 0: Memory at c1615000 (64-bit, non-prefetchable) [size=256]
	Region 4: I/O ports at 4040 [size=32]
	Kernel modules: i2c_i801

01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Thames [Radeon HD 7500M/7600M Series] (prog-if 00 [VGA controller])
	Subsystem: Dell Radeon HD 7670M
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 47
	Region 0: Memory at a0000000 (64-bit, prefetchable) [size=256M]
	Region 2: Memory at c0000000 (64-bit, non-prefetchable) [size=128K]
	Region 4: I/O ports at 3000 [size=256]
	Expansion ROM at c0020000 [disabled] [size=128K]
	Capabilities: [50] Power Management version 3
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00
		DevCap:	MaxPayload 256 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
			ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
			MaxPayload 256 bytes, MaxReadReq 512 bytes
		DevSta:	CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
		LnkCap:	Port #0, Speed 5GT/s, Width x16, ASPM L0s L1, Latency L0 <64ns, L1 <1us
			ClockPM- Surprise- LLActRep- BwNot-
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 5GT/s, Width x8, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
		DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR-, OBFF Not Supported
		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
		LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
			 Compliance De-emphasis: -6dB
		LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
			 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
	Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
		Address: 00000000fee0f00c  Data: 4152
	Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
	Capabilities: [150 v1] Advanced Error Reporting
		UESta:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
		UEMsk:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
		UESvrt:	DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
		CESta:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
		CEMsk:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
		AERCap:	First Error Pointer: 00, GenCap- CGenEn- ChkCap+ ChkEn-
	Kernel driver in use: radeon
	Kernel modules: radeon

07:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05)
	Subsystem: Dell Device 0598
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 45
	Region 0: I/O ports at 2000 [size=256]
	Region 2: Memory at c1404000 (64-bit, prefetchable) [size=4K]
	Region 4: Memory at c1400000 (64-bit, prefetchable) [size=16K]
	Capabilities: [40] Power Management version 3
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
		Address: 00000000fee0f00c  Data: 41e1
	Capabilities: [70] Express (v2) Endpoint, MSI 01
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
			ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 512 bytes
		DevSta:	CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
		LnkCap:	Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 unlimited, L1 <64us
			ClockPM+ Surprise- LLActRep- BwNot-
		LnkCtl:	ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
			ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
		DevCap2: Completion Timeout: Not Supported, TimeoutDis+, LTR-, OBFF Not Supported
		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
			 Compliance De-emphasis: -6dB
		LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
			 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
	Capabilities: [b0] MSI-X: Enable- Count=4 Masked-
		Vector table: BAR=4 offset=00000000
		PBA: BAR=4 offset=00000800
	Capabilities: [d0] Vital Product Data
		Unknown small resource type 00, will not decode more.
	Capabilities: [100 v1] Advanced Error Reporting
		UESta:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
		UEMsk:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
		UESvrt:	DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
		CESta:	RxErr+ BadTLP- BadDLLP+ Rollover- Timeout- NonFatalErr-
		CEMsk:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
		AERCap:	First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
	Capabilities: [140 v1] Virtual Channel
		Caps:	LPEVC=0 RefClk=100ns PATEntryBits=1
		Arb:	Fixed- WRR32- WRR64- WRR128-
		Ctrl:	ArbSelect=Fixed
		Status:	InProgress-
		VC0:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
			Arb:	Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
			Ctrl:	Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
			Status:	NegoPending- InProgress-
	Capabilities: [160 v1] Device Serial Number 5f-02-00-00-36-4c-e0-00
	Kernel driver in use: r8169
	Kernel modules: r8169

08:00.0 Network controller: Qualcomm Atheros AR9485 Wireless Network Adapter (rev 01)
	Subsystem: Dell Device 0209
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 17
	Region 0: Memory at c1500000 (64-bit, non-prefetchable) [size=512K]
	Expansion ROM at 9fb00000 [disabled] [size=64K]
	Capabilities: [40] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [50] MSI: Enable- Count=1/4 Maskable+ 64bit+
		Address: 0000000000000000  Data: 0000
		Masking: 00000000  Pending: 00000000
	Capabilities: [70] Express (v2) Endpoint, MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 <64us
			ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 512 bytes
		DevSta:	CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
		LnkCap:	Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <4us, L1 <64us
			ClockPM- Surprise- LLActRep- BwNot-
		LnkCtl:	ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
		DevCap2: Completion Timeout: Not Supported, TimeoutDis+, LTR-, OBFF Not Supported
		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
			 Compliance De-emphasis: -6dB
		LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
			 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
	Capabilities: [100 v1] Advanced Error Reporting
		UESta:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
		UEMsk:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
		UESvrt:	DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
		CESta:	RxErr+ BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
		CEMsk:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
		AERCap:	First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
	Capabilities: [140 v1] Virtual Channel
		Caps:	LPEVC=0 RefClk=100ns PATEntryBits=1
		Arb:	Fixed- WRR32- WRR64- WRR128-
		Ctrl:	ArbSelect=Fixed
		Status:	InProgress-
		VC0:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
			Arb:	Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
			Ctrl:	Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
			Status:	NegoPending- InProgress-
	Capabilities: [160 v1] Device Serial Number 00-00-00-00-00-00-00-00
	Kernel driver in use: ath9k
	Kernel modules: ath9k
вывод dmegs:

Код: Выделить всё

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.10.9-nrj-desktop-1rosa (mockbuild@localhost) (gcc version 4.7.3 20121001 (ROSA) (Linaro GCC 4.7-2012.10) ) #1 SMP PREEMPT Tue Aug 27 19:36:40 MSK 2013
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.10.9-nrj-desktop-1rosa root=UUID=253ce70b-8f74-478b-b55e-07bd1f399c05 ro splash=silent logo.nologo resume=/dev/sda1 init=/lib/systemd/systemd
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040005000-0x000000008ffaffff] usable
[    0.000000] BIOS-e820: [mem 0x000000008ffb0000-0x00000000913affff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000913b0000-0x000000009a3befff] usable
[    0.000000] BIOS-e820: [mem 0x000000009a3bf000-0x000000009aebefff] reserved
[    0.000000] BIOS-e820: [mem 0x000000009aebf000-0x000000009afbefff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000009afbf000-0x000000009affefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000009afff000-0x000000009affffff] usable
[    0.000000] BIOS-e820: [mem 0x000000009b000000-0x000000009f9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffb80000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000015f5fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Dell Inc. Inspiron 3521/0N1XH2, BIOS A04 11/21/2012
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x15f600 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-E7FFF write-protect
[    0.000000]   E8000-EFFFF write-combining
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FE0000000 write-back
[    0.000000]   2 base 09B000000 mask FFF000000 uncachable
[    0.000000]   3 base 09C000000 mask FFC000000 uncachable
[    0.000000]   4 base 0FFA00000 mask FFFE00000 write-protect
[    0.000000]   5 base 0FFC00000 mask FFFC00000 write-protect
[    0.000000]   6 base 100000000 mask F80000000 write-back
[    0.000000]   7 base 15F600000 mask FFFE00000 uncachable
[    0.000000]   8 base 15F800000 mask FFF800000 uncachable
[    0.000000]   9 base 160000000 mask FE0000000 uncachable
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: last_pfn = 0x9b000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0]
[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01eec000, 0x01eecfff] PGTABLE
[    0.000000] BRK [0x01eed000, 0x01eedfff] PGTABLE
[    0.000000] BRK [0x01eee000, 0x01eeefff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x15f400000-0x15f5fffff]
[    0.000000]  [mem 0x15f400000-0x15f5fffff] page 2M
[    0.000000] BRK [0x01eef000, 0x01eeffff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x15c000000-0x15f3fffff]
[    0.000000]  [mem 0x15c000000-0x15f3fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x100000000-0x15bffffff]
[    0.000000]  [mem 0x100000000-0x15bffffff] page 2M
[    0.000000] BRK [0x01ef0000, 0x01ef0fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x1fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff]
[    0.000000]  [mem 0x20200000-0x3fffffff] page 2M
[    0.000000]  [mem 0x40000000-0x40003fff] page 4k
[    0.000000] init_memory_mapping: [mem 0x40005000-0x8ffaffff]
[    0.000000]  [mem 0x40005000-0x401fffff] page 4k
[    0.000000]  [mem 0x40200000-0x8fdfffff] page 2M
[    0.000000]  [mem 0x8fe00000-0x8ffaffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x913b0000-0x9a3befff]
[    0.000000]  [mem 0x913b0000-0x913fffff] page 4k
[    0.000000]  [mem 0x91400000-0x9a1fffff] page 2M
[    0.000000]  [mem 0x9a200000-0x9a3befff] page 4k
[    0.000000] init_memory_mapping: [mem 0x9afff000-0x9affffff]
[    0.000000]  [mem 0x9afff000-0x9affffff] page 4k
[    0.000000] RAMDISK: [mem 0x376fa000-0x37b74fff]
[    0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 DELL  )
[    0.000000] ACPI: XSDT 000000009affe210 00094 (v01 DELL    CL09    00000001      01000013)
[    0.000000] ACPI: FACP 000000009affb000 0010C (v05 DELL    CL09    00000001 ASL  00040000)
[    0.000000] ACPI: DSDT 000000009afee000 092F2 (v01 DELL    CL09    00000000 ASL  00040000)
[    0.000000] ACPI: FACS 000000009afb9000 00040
[    0.000000] ACPI: UEFI 000000009affd000 00236 (v01 DELL    CL09    00000001 ASL  00040000)
[    0.000000] ACPI: ASF! 000000009affc000 000A5 (v32 DELL    CL09    00000001 ASL  00040000)
[    0.000000] ACPI: HPET 000000009affa000 00038 (v01 DELL    CL09    00000001 ASL  00040000)
[    0.000000] ACPI: APIC 000000009aff9000 0008C (v03 DELL    CL09    00000001 ASL  00040000)
[    0.000000] ACPI: MCFG 000000009aff8000 0003C (v01 DELL    CL09    00000001 ASL  00040000)
[    0.000000] ACPI: SSDT 000000009afed000 006FE (v01 COMPAL CRV ORB  00001000 ACPI 00040000)
[    0.000000] ACPI: BOOT 000000009afeb000 00028 (v01 DELL    CL09    00000001 ASL  00040000)
[    0.000000] ACPI: ASPT 000000009afe9000 00034 (v07 DELL    CL09    00000001 ASL  00040000)
[    0.000000] ACPI: DBGP 000000009afe8000 00034 (v01 DELL    CL09    00000001 ASL  00040000)
[    0.000000] ACPI: FPDT 000000009afe6000 00044 (v01 DELL    CL09    00000001 ASL  00040000)
[    0.000000] ACPI: SSDT 000000009afe5000 008E4 (v01 COMPAL CRV ORB  00003000 ACPI 00040000)
[    0.000000] ACPI: SSDT 000000009afe4000 00A92 (v01 COMPAL CRV ORB  00003000 ACPI 00040000)
[    0.000000] ACPI: SSDT 000000009afe2000 01EED (v01 COMPAL CRV ORB  00001000 ACPI 00040000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000015f5fffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x15f5fffff]
[    0.000000]   NODE_DATA [mem 0x15f5f5000-0x15f5f8fff]
[    0.000000]  [ffffea0000000000-ffffea00057fffff] PMD -> [ffff88015ac00000-ffff88015ebfffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x15f5fffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009cfff]
[    0.000000]   node   0: [mem 0x00100000-0x1fffffff]
[    0.000000]   node   0: [mem 0x20200000-0x40003fff]
[    0.000000]   node   0: [mem 0x40005000-0x8ffaffff]
[    0.000000]   node   0: [mem 0x913b0000-0x9a3befff]
[    0.000000]   node   0: [mem 0x9afff000-0x9affffff]
[    0.000000]   node   0: [mem 0x100000000-0x15f5fffff]
[    0.000000] On node 0 totalpages: 1016667
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 9719 pages used for memmap
[    0.000000]   DMA32 zone: 622015 pages, LIFO batch:31
[    0.000000]   Normal zone: 6104 pages used for memmap
[    0.000000]   Normal zone: 390656 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[    0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[    0.000000] PM: Registered nosave memory: 0000000040004000 - 0000000040005000
[    0.000000] PM: Registered nosave memory: 000000008ffb0000 - 00000000913b0000
[    0.000000] PM: Registered nosave memory: 000000009a3bf000 - 000000009aebf000
[    0.000000] PM: Registered nosave memory: 000000009aebf000 - 000000009afbf000
[    0.000000] PM: Registered nosave memory: 000000009afbf000 - 000000009afff000
[    0.000000] PM: Registered nosave memory: 000000009b000000 - 000000009fa00000
[    0.000000] PM: Registered nosave memory: 000000009fa00000 - 00000000e0000000
[    0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[    0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000feb00000
[    0.000000] PM: Registered nosave memory: 00000000feb00000 - 00000000feb04000
[    0.000000] PM: Registered nosave memory: 00000000feb04000 - 00000000fec00000
[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[    0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
[    0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000
[    0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
[    0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[    0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[    0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffb80000
[    0.000000] PM: Registered nosave memory: 00000000ffb80000 - 0000000100000000
[    0.000000] e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88015f200000 s85440 r8192 d21056 u262144
[    0.000000] pcpu-alloc: s85440 r8192 d21056 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1000759
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.10.9-nrj-desktop-1rosa root=UUID=253ce70b-8f74-478b-b55e-07bd1f399c05 ro splash=silent logo.nologo resume=/dev/sda1 init=/lib/systemd/systemd
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3913916k/5756928k available (6319k kernel code, 1690260k absent, 152752k reserved, 6811k data, 1208k init)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
[    0.000000] NR_IRQS:4352 nr_irqs:744 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.001000] tsc: Detected 1795.791 MHz processor
[    0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3591.58 BogoMIPS (lpj=1795791)
[    0.000012] pid_max: default: 32768 minimum: 301
[    0.000043] Security Framework initialized
[    0.000055] TOMOYO Linux initialized
[    0.000373] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.001807] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.002454] Mount-cache hash table entries: 256
[    0.002670] Initializing cgroup subsys devices
[    0.002676] Initializing cgroup subsys freezer
[    0.002680] Initializing cgroup subsys net_cls
[    0.002685] Initializing cgroup subsys blkio
[    0.002689] Initializing cgroup subsys bfqio
[    0.002720] CPU: Physical Processor ID: 0
[    0.002724] CPU: Processor Core ID: 0
[    0.002732] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.002744] mce: CPU supports 7 MCE banks
[    0.002760] CPU0: Thermal monitoring enabled (TM1)
[    0.002773] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 1
[    0.002962] Freeing SMP alternatives: 20k freed
[    0.004207] ACPI: Core revision 20130328
[    0.011756] ACPI: All ACPI Tables successfully acquired
[    0.023552] ftrace: allocating 22975 entries in 90 pages
[    0.038334] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.048338] smpboot: CPU0: Intel(R) Core(TM) i3-3217U CPU @ 1.80GHz (fam: 06, model: 3a, stepping: 09)
[    0.048351] TSC deadline timer enabled
[    0.048364] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, Intel PMU driver.
[    0.048376] ... version:                3
[    0.048379] ... bit width:              48
[    0.048382] ... generic registers:      4
[    0.048386] ... value mask:             0000ffffffffffff
[    0.048389] ... max period:             000000007fffffff
[    0.048393] ... fixed-purpose events:   3
[    0.048396] ... event mask:             000000070000000f
[    0.057467] smpboot: Booting Node   0, Processors  #1 #2 #3
[    0.101330] Brought up 4 CPUs
[    0.101338] smpboot: Total of 4 processors activated (14366.32 BogoMIPS)
[    0.105614] devtmpfs: initialized
[    0.106683] PM: Registering ACPI NVS region [mem 0x9aebf000-0x9afbefff] (1048576 bytes)
[    0.107647] xor: automatically using best checksumming function:
[    0.117360]    avx       : 11764.000 MB/sec
[    0.117387] RTC time: 13:05:46, date: 10/24/13
[    0.117436] NET: Registered protocol family 16
[    0.117568] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.117574] ACPI: bus type PCI registered
[    0.117649] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.117657] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.152993] PCI: Using configuration type 1 for base access
[    0.153004] dmi type 0xB1 record - unknown flag
[    0.153718] bio: create slab <bio-0> at 0
[    0.170433] raid6: sse2x1    4601 MB/s
[    0.187456] raid6: sse2x2    5750 MB/s
[    0.204473] raid6: sse2x4    6675 MB/s
[    0.204477] raid6: using algorithm sse2x4 (6675 MB/s)
[    0.204481] raid6: using ssse3x2 recovery algorithm
[    0.204543] ACPI: Added _OSI(Module Device)
[    0.204548] ACPI: Added _OSI(Processor Device)
[    0.204552] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.204556] ACPI: Added _OSI(Processor Aggregator Device)
[    0.206325] ACPI: EC: Look up EC in DSDT
[    0.208211] ACPI: Executed 1 blocks of module-level executable AML code
[    0.221085] ACPI: SSDT 000000009ae17018 0083B (v01  PmRef  Cpu0Cst 00003001 INTL 20111123)
[    0.221556] ACPI: Dynamic OEM Table Load:
[    0.221561] ACPI: SSDT           (null) 0083B (v01  PmRef  Cpu0Cst 00003001 INTL 20111123)
[    0.225856] ACPI: SSDT 000000009ae18a98 00303 (v01  PmRef    ApIst 00003000 INTL 20111123)
[    0.226359] ACPI: Dynamic OEM Table Load:
[    0.226365] ACPI: SSDT           (null) 00303 (v01  PmRef    ApIst 00003000 INTL 20111123)
[    0.230628] ACPI: SSDT 000000009ae16d98 00119 (v01  PmRef    ApCst 00003000 INTL 20111123)
[    0.231084] ACPI: Dynamic OEM Table Load:
[    0.231088] ACPI: SSDT           (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20111123)
[    0.234484] ACPI: Interpreter enabled
[    0.234496] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130328/hwxface-568)
[    0.234513] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130328/hwxface-568)
[    0.234536] ACPI: (supports S0 S3 S4 S5)
[    0.234540] ACPI: Using IOAPIC for interrupt routing
[    0.234578] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.234724] ACPI: No dock devices found.
[    0.428827] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.428988] \_SB_.PCI0:_OSC invalid UUID
[    0.428990] _OSC request data:1 8 0 
[    0.429652] PCI host bridge to bus 0000:00
[    0.429659] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.429664] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.429669] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.429674] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.429679] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff]
[    0.429691] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[    0.429788] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[    0.429828] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.429863] pci 0000:00:01.0: System wakeup disabled by ACPI
[    0.429911] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[    0.429924] pci 0000:00:02.0: reg 10: [mem 0xc1000000-0xc13fffff 64bit]
[    0.429932] pci 0000:00:02.0: reg 18: [mem 0xb0000000-0xbfffffff 64bit pref]
[    0.429938] pci 0000:00:02.0: reg 20: [io  0x4000-0x403f]
[    0.430056] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[    0.430085] pci 0000:00:14.0: reg 10: [mem 0xc1600000-0xc160ffff 64bit]
[    0.430171] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.430210] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.430257] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[    0.430287] pci 0000:00:16.0: reg 10: [mem 0xc1614000-0xc161400f 64bit]
[    0.430375] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.430472] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[    0.430499] pci 0000:00:1a.0: reg 10: [mem 0xc1619000-0xc16193ff]
[    0.430601] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.430665] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[    0.430686] pci 0000:00:1b.0: reg 10: [mem 0xc1610000-0xc1613fff 64bit]
[    0.430765] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.430826] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[    0.430919] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.430964] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.431007] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[    0.431103] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.431144] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    0.431201] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[    0.431226] pci 0000:00:1d.0: reg 10: [mem 0xc1618000-0xc16183ff]
[    0.431329] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.431371] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.431413] pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100
[    0.431579] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[    0.431603] pci 0000:00:1f.2: reg 10: [io  0x4088-0x408f]
[    0.431613] pci 0000:00:1f.2: reg 14: [io  0x4094-0x4097]
[    0.431624] pci 0000:00:1f.2: reg 18: [io  0x4080-0x4087]
[    0.431635] pci 0000:00:1f.2: reg 1c: [io  0x4090-0x4093]
[    0.431644] pci 0000:00:1f.2: reg 20: [io  0x4060-0x407f]
[    0.431654] pci 0000:00:1f.2: reg 24: [mem 0xc1617000-0xc16177ff]
[    0.431708] pci 0000:00:1f.2: PME# supported from D3hot
[    0.431767] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[    0.431787] pci 0000:00:1f.3: reg 10: [mem 0xc1615000-0xc16150ff 64bit]
[    0.431812] pci 0000:00:1f.3: reg 20: [io  0x4040-0x405f]
[    0.431930] pci 0000:01:00.0: [1002:6840] type 00 class 0x030000
[    0.431944] pci 0000:01:00.0: reg 10: [mem 0xa0000000-0xafffffff 64bit pref]
[    0.431955] pci 0000:01:00.0: reg 18: [mem 0xc0000000-0xc001ffff 64bit]
[    0.431962] pci 0000:01:00.0: reg 20: [io  0x3000-0x30ff]
[    0.431977] pci 0000:01:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
[    0.432010] pci 0000:01:00.0: supports D1 D2
[    0.432029] pci 0000:01:00.0: System wakeup disabled by ACPI
[    0.433138] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[    0.433144] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    0.433147] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xc0ffffff]
[    0.433152] pci 0000:00:01.0:   bridge window [mem 0xa0000000-0xafffffff 64bit pref]
[    0.433297] pci 0000:07:00.0: [10ec:8136] type 00 class 0x020000
[    0.433368] pci 0000:07:00.0: reg 10: [io  0x2000-0x20ff]
[    0.433495] pci 0000:07:00.0: reg 18: [mem 0xc1404000-0xc1404fff 64bit pref]
[    0.433572] pci 0000:07:00.0: reg 20: [mem 0xc1400000-0xc1403fff 64bit pref]
[    0.433918] pci 0000:07:00.0: supports D1 D2
[    0.433921] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.435194] pci 0000:00:1c.0: PCI bridge to [bus 07]
[    0.435202] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.435212] pci 0000:00:1c.0:   bridge window [mem 0xc1400000-0xc14fffff 64bit pref]
[    0.435324] pci 0000:08:00.0: [168c:0032] type 00 class 0x028000
[    0.435377] pci 0000:08:00.0: reg 10: [mem 0xc1500000-0xc157ffff 64bit]
[    0.435501] pci 0000:08:00.0: reg 30: [mem 0xffff0000-0xffffffff pref]
[    0.435631] pci 0000:08:00.0: supports D1 D2
[    0.435633] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.437171] pci 0000:00:1c.1: PCI bridge to [bus 08]
[    0.437182] pci 0000:00:1c.1:   bridge window [mem 0xc1500000-0xc15fffff]
[    0.437271] \_SB_.PCI0:_OSC invalid UUID
[    0.437272] _OSC request data:1 1f 0 
[    0.437277] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[    0.437284] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
[    0.497765] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[    0.497837] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.497904] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.497973] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.498039] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.498110] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[    0.498181] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.498247] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.498558] ACPI: Enabled 5 GPEs in block 00 to 3F
[    0.498570] acpi root: \_SB_.PCI0 notify handler is installed
[    0.498639] Found 1 acpi root devices
[    0.498680] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    0.498806] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.498817] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[    0.498822] vgaarb: loaded
[    0.498825] vgaarb: bridge control possible 0000:01:00.0
[    0.498828] vgaarb: no bridge control possible 0000:00:02.0
[    0.498896] SCSI subsystem initialized
[    0.498900] ACPI: bus type ATA registered
[    0.498944] libata version 3.00 loaded.
[    0.499039] PCI: Using ACPI for IRQ routing
[    0.506526] PCI: pci_cache_line_size set to 64 bytes
[    0.506596] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
[    0.506598] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[    0.506600] e820: reserve RAM buffer [mem 0x8ffb0000-0x8fffffff]
[    0.506601] e820: reserve RAM buffer [mem 0x9a3bf000-0x9bffffff]
[    0.506604] e820: reserve RAM buffer [mem 0x9b000000-0x9bffffff]
[    0.506605] e820: reserve RAM buffer [mem 0x15f600000-0x15fffffff]
[    0.506695] NetLabel: Initializing
[    0.506699] NetLabel:  domain hash size = 128
[    0.506702] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.506715] NetLabel:  unlabeled traffic allowed by default
[    0.506751] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.506762] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.508781] Switching to clocksource hpet
[    0.515921] pnp: PnP ACPI init
[    0.515934] ACPI: bus type PNP registered
[    0.515974] pnp 00:00: [dma 4]
[    0.515994] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.516018] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
[    0.516128] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.516162] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.516209] system 00:04: [io  0x0680-0x069f] has been reserved
[    0.516215] system 00:04: [io  0x1000-0x100f] has been reserved
[    0.516220] system 00:04: [io  0xffff] has been reserved
[    0.516225] system 00:04: [io  0xffff] has been reserved
[    0.516230] system 00:04: [io  0x0400-0x0453] has been reserved
[    0.516235] system 00:04: [io  0x0458-0x047f] has been reserved
[    0.516240] system 00:04: [io  0x0500-0x057f] has been reserved
[    0.516245] system 00:04: [io  0x164e-0x164f] has been reserved
[    0.516250] system 00:04: [io  0xfd60-0xfd63] has been reserved
[    0.516256] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.516284] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.516335] system 00:06: [io  0x0454-0x0457] has been reserved
[    0.516341] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.516387] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.516422] pnp 00:08: Plug and Play ACPI device, IDs DLL0598 PNP0f13 (active)
[    0.575956] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.575962] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.575968] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.575973] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.575979] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
[    0.575985] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.575990] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.575995] system 00:09: [mem 0xff000000-0xff000fff] has been reserved
[    0.576001] system 00:09: [mem 0xff010000-0xffffffff] could not be reserved
[    0.576007] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.576013] system 00:09: [mem 0x9fa00000-0x9fa00fff] has been reserved
[    0.576019] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.576409] system 00:0a: [mem 0x20000000-0x201fffff] has been reserved
[    0.576416] system 00:0a: [mem 0x40004000-0x40004fff] has been reserved
[    0.576421] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.576443] pnp: PnP ACPI: found 11 devices
[    0.576447] ACPI: bus type PNP unregistered
[    0.581001] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
[    0.581008] pci 0000:08:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
[    0.581043] pci 0000:00:1c.1: BAR 15: assigned [mem 0x9fb00000-0x9fbfffff pref]
[    0.581050] pci 0000:01:00.0: BAR 6: assigned [mem 0xc0020000-0xc003ffff pref]
[    0.581057] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[    0.581062] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    0.581068] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xc0ffffff]
[    0.581075] pci 0000:00:01.0:   bridge window [mem 0xa0000000-0xafffffff 64bit pref]
[    0.581083] pci 0000:00:1c.0: PCI bridge to [bus 07]
[    0.581089] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.581101] pci 0000:00:1c.0:   bridge window [mem 0xc1400000-0xc14fffff 64bit pref]
[    0.581113] pci 0000:08:00.0: BAR 6: assigned [mem 0x9fb00000-0x9fb0ffff pref]
[    0.581118] pci 0000:00:1c.1: PCI bridge to [bus 08]
[    0.581126] pci 0000:00:1c.1:   bridge window [mem 0xc1500000-0xc15fffff]
[    0.581134] pci 0000:00:1c.1:   bridge window [mem 0x9fb00000-0x9fbfffff pref]
[    0.581406] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.581408] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.581411] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.581413] pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff]
[    0.581415] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[    0.581418] pci_bus 0000:01: resource 1 [mem 0xc0000000-0xc0ffffff]
[    0.581420] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xafffffff 64bit pref]
[    0.581422] pci_bus 0000:07: resource 0 [io  0x2000-0x2fff]
[    0.581425] pci_bus 0000:07: resource 2 [mem 0xc1400000-0xc14fffff 64bit pref]
[    0.581427] pci_bus 0000:08: resource 1 [mem 0xc1500000-0xc15fffff]
[    0.581429] pci_bus 0000:08: resource 2 [mem 0x9fb00000-0x9fbfffff pref]
[    0.581462] NET: Registered protocol family 2
[    0.581665] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
[    0.581814] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.581904] TCP: Hash tables configured (established 32768 bind 32768)
[    0.581927] TCP: reno registered
[    0.581939] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.581960] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.582036] NET: Registered protocol family 1
[    0.582052] pci 0000:00:02.0: Boot video device
[    0.605909] PCI: CLS 64 bytes, default 64
[    0.605957] Trying to unpack rootfs image as initramfs...
[    1.298520] Freeing initrd memory: 4588k freed
[    1.299252] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.299263] software IO TLB [mem 0x963bf000-0x9a3bf000] (64MB) mapped at [ffff8800963bf000-ffff88009a3befff]
[    1.299306] Simple Boot Flag at 0x44 set to 0x1
[    1.299708] audit: initializing netlink socket (disabled)
[    1.299722] type=2000 audit(1382619947.274:1): initialized
[    1.328372] bounce pool size: 64 pages
[    1.328386] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.329753] VFS: Disk quotas dquot_6.5.2
[    1.329798] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.330243] bio: create slab <bio-1> at 1
[    1.330379] Btrfs loaded
[    1.330388] msgmni has been set to 7653
[    1.330707] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.330748] io scheduler noop registered
[    1.330752] io scheduler deadline registered
[    1.330781] io scheduler cfq registered
[    1.330808] io scheduler bfq registered (default)
[    1.330881] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    1.331070] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.331513] Linux agpgart interface v0.103
[    1.331598] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[    1.331603] vesafb: scrolling: redraw
[    1.331607] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.332053] vesafb: framebuffer at 0xb0000000, mapped to 0xffffc90010800000, using 3072k, total 3072k
[    1.404035] Console: switching to colour frame buffer device 128x48
[    1.476805] fb0: VESA VGA frame buffer device
[    1.477401] intel_idle: MWAIT substates: 0x21120
[    1.477403] intel_idle: v0.4 model 0x3A
[    1.477404] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.477447] GHES: HEST is not enabled!
[    1.479261] brd: module loaded
[    1.479845] mei_me 0000:00:16.0: setting latency timer to 64
[    1.479880] mei_me 0000:00:16.0: irq 41 for MSI/MSI-X
[    1.483140] ahci 0000:00:1f.2: version 3.0
[    1.483268] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
[    1.493514] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
[    1.494615] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst 
[    1.495647] ahci 0000:00:1f.2: setting latency timer to 64
[    1.497833] scsi0 : ahci
[    1.498250] scsi1 : ahci
[    1.498666] scsi2 : ahci
[    1.499066] scsi3 : ahci
[    1.499465] scsi4 : ahci
[    1.499874] scsi5 : ahci
[    1.500261] ata1: SATA max UDMA/133 abar m2048@0xc1617000 port 0xc1617100 irq 42
[    1.501260] ata2: DUMMY
[    1.501596] ata3: SATA max UDMA/133 abar m2048@0xc1617000 port 0xc1617200 irq 42
[    1.502592] ata4: DUMMY
[    1.502920] ata5: DUMMY
[    1.503247] ata6: DUMMY
[    1.503651] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.524709] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.525399] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.526167] mousedev: PS/2 mouse device common for all mice
[    1.527029] rtc_cmos 00:05: RTC can wake from S4
[    1.527784] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    1.552421] rtc_cmos 00:05: alarms up to one month, 242 bytes nvram, hpet irqs
[    1.577363] cpuidle: using governor ladder
[    1.589174] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.628993] cpuidle: using governor menu
[    1.654479] ledtrig-cpu: registered to indicate activity on CPUs
[    1.680364] scsi6 : vhba
[    1.705846] TCP: cubic registered
[    1.730926] Key type dns_resolver registered
[    1.756174] PM: Checking hibernation image partition /dev/sda1
[    1.808482] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.834109] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.859486] ata3.00: ATAPI: MATSHITA DVD+/-RW UJ8C2, 1.01, max UDMA/133
[    1.886311] ata3.00: configured for UDMA/133
[    1.967686] ata1.00: ATA-9: ST1000LM014-1EJ164, SM11, max UDMA/133
[    1.992954] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    2.067444] ata1.00: configured for UDMA/133
[    2.093480] scsi 0:0:0:0: Direct-Access     ATA      ST1000LM014-1EJ1 SM11 PQ: 0 ANSI: 5
[    2.120664] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    2.121445] scsi 2:0:0:0: CD-ROM            MATSHITA DVD+-RW UJ8C2    1.01 PQ: 0 ANSI: 5
[    2.175084] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    2.202218] sd 0:0:0:0: [sda] Write Protect is off
[    2.229043] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.229067] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.259117]  sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
[    2.287131] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.299249] tsc: Refined TSC clocksource calibration: 1795.920 MHz
[    2.299254] Switching to clocksource tsc
[    2.561941] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x26c00, board id: 2382, fw id: 1238635
[    2.696429] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input1
[    2.730349] PM: Hibernation image partition 8:1 present
[    2.730357] PM: Looking for hibernation image.
[    2.730697] PM: Image not found (code -22)
[    2.730702] PM: Hibernation image not present or could not be loaded.
[    2.730723] registered taskstats version 1
[    2.760445]   Magic number: 1:719:79
[    2.789183] rtc_cmos 00:05: setting system clock to 2013-10-24 13:05:49 UTC (1382619949)
[    2.819238] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    2.849819] EDD information not available.
[    2.881666] Freeing unused kernel memory: 1208k freed
[    2.913321] Write protecting the kernel read-only data: 12288k
[    2.950416] Freeing unused kernel memory: 1864k freed
[    2.985722] Freeing unused kernel memory: 1180k freed
[    3.044606] dracut: dracut-EE 2012.1 Desktop dracut-027-
[    3.092582] systemd-udevd[137]: starting version 194
[    3.138860] [drm] Initialized drm 1.1.0 20060810
[    3.172528] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0C:00/input/input2
[    3.205951] ACPI: Power Button [PWRB]
[    3.238937] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[    3.272516] ACPI: Lid Switch [LID0]
[    3.306343] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[    3.340945] ACPI: Power Button [PWRF]
[    3.380045] [drm] Memory usable by graphics device = 2048M
[    3.414752] checking generic (b0000000 300000) vs hw (b0000000 10000000)
[    3.414756] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[    3.450083] Console: switching to colour dummy device 80x25
[    3.450181] i915 0000:00:02.0: setting latency timer to 64
[    3.490287] i915 0000:00:02.0: irq 43 for MSI/MSI-X
[    3.490301] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    3.490309] [drm] Driver supports precise vblank timestamp query.
[    3.490426] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
[    3.490437] vgaarb: transferring owner from PCI:0000:00:02.0 to PCI:0000:01:00.0
[    3.574829] [drm] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2
[    3.584617] fbcon: inteldrmfb (fb0) is primary device
[    4.281715] Console: switching to colour frame buffer device 170x48
[    4.285771] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    4.285811] i915 0000:00:02.0: registered panic notifier
[    4.286080] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[    4.287013] ACPI Error: [\_SB_.PCI0.GFX0.DD02._BCL] Namespace lookup failure, AE_NOT_FOUND (20130328/psargs-359)
[    4.287093] ACPI Error: Method parse/execution failed [\_SB_.PCI0.PEG0.PEGP.DD02._BCL] (Node ffff88015a28b988), AE_NOT_FOUND (20130328/psparse-537)
[    4.287342] ACPI: Video Device [PEGP] (multi-head: yes  rom: no  post: no)
[    4.287451] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2c/LNXVIDEO:00/input/input5
[    4.288325] acpi device:3a: registered as cooling_device0
[    4.288543] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    4.288631] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input6
[    4.288708] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    4.291526] dracut: Starting plymouth daemon
[    4.730840] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[    6.142600] ACPI: bus type USB registered
[    6.142632] usbcore: registered new interface driver usbfs
[    6.142645] usbcore: registered new interface driver hub
[    6.142691] usbcore: registered new device driver usb
[    6.143591] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    6.143749] xhci_hcd 0000:00:14.0: setting latency timer to 64
[    6.143754] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    6.143761] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    6.143855] ehci-pci: EHCI PCI platform driver
[    6.143877] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    6.143914] xhci_hcd 0000:00:14.0: irq 44 for MSI/MSI-X
[    6.143993] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    6.143998] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    6.144001] usb usb1: Product: xHCI Host Controller
[    6.144011] usb usb1: Manufacturer: Linux 3.10.9-nrj-desktop-1rosa xhci_hcd
[    6.144015] usb usb1: SerialNumber: 0000:00:14.0
[    6.144131] xHCI xhci_add_endpoint called for root hub
[    6.144133] xHCI xhci_check_bandwidth called for root hub
[    6.144172] hub 1-0:1.0: USB hub found
[    6.144184] hub 1-0:1.0: 4 ports detected
[    6.145031] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    6.145037] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    6.145064] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    6.145068] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    6.145071] usb usb2: Product: xHCI Host Controller
[    6.145074] usb usb2: Manufacturer: Linux 3.10.9-nrj-desktop-1rosa xhci_hcd
[    6.145078] usb usb2: SerialNumber: 0000:00:14.0
[    6.145208] xHCI xhci_add_endpoint called for root hub
[    6.145211] xHCI xhci_check_bandwidth called for root hub
[    6.145248] hub 2-0:1.0: USB hub found
[    6.145257] hub 2-0:1.0: 4 ports detected
[    6.148672] sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
[    6.148677] cdrom: Uniform CD-ROM driver Revision: 3.20
[    6.149039] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    6.155239] ehci-pci 0000:00:1a.0: setting latency timer to 64
[    6.155256] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    6.155266] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    6.155289] ehci-pci 0000:00:1a.0: debug port 2
[    6.159194] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    6.159226] ehci-pci 0000:00:1a.0: irq 16, io mem 0xc1619000
[    6.165019] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    6.165047] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    6.165050] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    6.165053] usb usb3: Product: EHCI Host Controller
[    6.165055] usb usb3: Manufacturer: Linux 3.10.9-nrj-desktop-1rosa ehci_hcd
[    6.165057] usb usb3: SerialNumber: 0000:00:1a.0
[    6.165243] hub 3-0:1.0: USB hub found
[    6.165251] hub 3-0:1.0: 2 ports detected
[    6.165582] ehci-pci 0000:00:1d.0: setting latency timer to 64
[    6.165594] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    6.165603] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
[    6.165624] ehci-pci 0000:00:1d.0: debug port 2
[    6.169534] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    6.169562] ehci-pci 0000:00:1d.0: irq 23, io mem 0xc1618000
[    6.175009] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    6.175040] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[    6.175043] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    6.175046] usb usb4: Product: EHCI Host Controller
[    6.175048] usb usb4: Manufacturer: Linux 3.10.9-nrj-desktop-1rosa ehci_hcd
[    6.175050] usb usb4: SerialNumber: 0000:00:1d.0
[    6.175198] hub 4-0:1.0: USB hub found
[    6.175206] hub 4-0:1.0: 2 ports detected
[    6.496990] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[    6.510919] usb 1-1: New USB device found, idVendor=05ac, idProduct=1297
[    6.510925] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    6.510928] usb 1-1: Product: iPhone
[    6.510930] usb 1-1: Manufacturer: Apple Inc.
[    6.510932] usb 1-1: SerialNumber: 2f6667b336aeb988777eb884d17e819324ea56d1
[    6.511126] usb 1-1: ep 0x2 - rounding interval to 8 microframes, ep desc says 10 microframes
[    6.511134] usb 1-1: ep 0x81 - rounding interval to 8 microframes, ep desc says 10 microframes
[    6.613898] usb 3-1: new high-speed USB device number 2 using ehci-pci
[    6.649173] PM: Marking nosave pages: [mem 0x0009d000-0x000fffff]
[    6.649181] PM: Marking nosave pages: [mem 0x20000000-0x201fffff]
[    6.649192] PM: Marking nosave pages: [mem 0x40004000-0x40004fff]
[    6.649194] PM: Marking nosave pages: [mem 0x8ffb0000-0x913affff]
[    6.649289] PM: Marking nosave pages: [mem 0x9a3bf000-0x9affefff]
[    6.649348] PM: Marking nosave pages: [mem 0x9b000000-0xffffffff]
[    6.650904] PM: Basic memory bitmaps created
[    6.671390] PM: Basic memory bitmaps freed
[    6.671396] video LNXVIDEO:00: Restoring backlight state
[    6.671398] video LNXVIDEO:01: Restoring backlight state
[    6.674466] PM: Starting manual resume from disk
[    6.674472] PM: Hibernation image partition 8:1 present
[    6.674474] PM: Looking for hibernation image.
[    6.675716] PM: Image not found (code -22)
[    6.675719] PM: Hibernation image not present or could not be loaded.
[    6.722377] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[    6.728234] usb 3-1: New USB device found, idVendor=8087, idProduct=0024
[    6.728239] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    6.728509] hub 3-1:1.0: USB hub found
[    6.728589] hub 3-1:1.0: 6 ports detected
[    6.746778] dracut: Checking ext4: /dev/disk/by-uuid/253ce70b-8f74-478b-b55e-07bd1f399c05
[    6.746862] dracut: issuing e2fsck -a  /dev/disk/by-uuid/253ce70b-8f74-478b-b55e-07bd1f399c05
[    6.769494] dracut: /dev/disk/by-uuid/253ce70b-8f74-478b-b55e-07bd1f399c05: clean, 207970/1602496 files, 1613280/6399629 blocks
[    6.771044] dracut: Mounting /dev/disk/by-uuid/253ce70b-8f74-478b-b55e-07bd1f399c05 with -o acl,noatime,ro
[    6.780026] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: acl
[    6.831809] usb 4-1: new high-speed USB device number 2 using ehci-pci
[    6.834884] dracut: Mounted root filesystem /dev/sda5
[    6.906608] dracut: Switching root
[    6.946171] usb 4-1: New USB device found, idVendor=8087, idProduct=0024
[    6.946177] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    6.946444] hub 4-1:1.0: USB hub found
[    6.946533] hub 4-1:1.0: 6 ports detected
[    6.962787] systemd[1]: RTC configured in localtime, applying delta of 240 minutes to system time.
[    6.965084] systemd[1]: systemd 194 running in system mode. (+PAM +LIBWRAP +AUDIT -SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ; mandriva)
[    7.006550] systemd[1]: Inserted module 'autofs4'
[    7.020879] usb 3-1.1: new full-speed USB device number 3 using ehci-pci
[    7.042545] NET: Registered protocol family 10
[    7.042762] systemd[1]: Inserted module 'ipv6'
[    7.043267] systemd[1]: Set hostname to <dell-notebook.localdomain>.
[    7.107718] usb 3-1.1: New USB device found, idVendor=0cf3, idProduct=e004
[    7.107724] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    7.107727] usb 3-1.1: Product: Bluetooth USB Host Controller
[    7.107729] usb 3-1.1: Manufacturer: Atheros Communications
[    7.107731] usb 3-1.1: SerialNumber: Alaska Day 2006
[    7.181839] usb 3-1.3: new high-speed USB device number 4 using ehci-pci
[    7.196341] systemd[1]: Starting RPC Port Mapper.
[    7.196409] systemd[1]: Reached target RPC Port Mapper.
[    7.196428] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    7.196499] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    7.196514] systemd[1]: Starting Syslog Socket.
[    7.196605] systemd[1]: Listening on Syslog Socket.
[    7.196621] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[    7.196703] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    7.196717] systemd[1]: Starting Delayed Shutdown Socket.
[    7.196785] systemd[1]: Listening on Delayed Shutdown Socket.
[    7.196816] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[    7.196951] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    7.196965] systemd[1]: Starting Encrypted Volumes.
[    7.197010] systemd[1]: Reached target Encrypted Volumes.
[    7.197023] systemd[1]: Expecting device dev-disk-by\x2duuid-90c700cf\x2d5013\x2d4984\x2da0dc\x2daec05c435ca7.device...
[    7.197116] systemd[1]: Starting udev Kernel Socket.
[    7.197178] systemd[1]: Listening on udev Kernel Socket.
[    7.197233] systemd[1]: Starting udev Control Socket.
[    7.197302] systemd[1]: Listening on udev Control Socket.
[    7.197315] systemd[1]: Expecting device dev-disk-by\x2duuid-d64a5d9f\x2dabda\x2d44ba\x2db896\x2d6dd2f2bc9831.device...
[    7.197353] systemd[1]: Expecting device dev-disk-by\x2duuid-ec314cbc\x2dd7f5\x2d4528\x2db49f\x2d3981d5d32086.device...
[    7.197390] systemd[1]: Expecting device dev-disk-by\x2duuid-7996f391\x2d1b89\x2d4132\x2d8a54\x2de068a95f2322.device...
[    7.197431] systemd[1]: Starting Journal Socket.
[    7.197511] systemd[1]: Listening on Journal Socket.
[    7.197528] systemd[1]: Starting Syslog.
[    7.197577] systemd[1]: Reached target Syslog.
[    7.197905] systemd[1]: Starting Load legacy module configuration...
[    7.198437] systemd[1]: Starting Configure read-only root support...
[    7.198952] systemd[1]: Started File System Check on Root Device.
[    7.198983] systemd[1]: Starting Remount Root and Kernel File Systems...
[    7.199562] systemd[1]: Starting udev Coldplug all Devices...
[    7.200045] systemd[1]: Starting udev Kernel Device Manager...
[    7.200492] systemd[1]: Starting Journal Service...
[    7.201115] systemd[1]: Started Journal Service.
[    7.203825] systemd[1]: Starting Load Kernel Modules...
[    7.204974] systemd[1]: Started Set Up Additional Binary Formats.
[    7.205629] systemd[1]: Starting Apply Kernel Variables...
[    7.206120] systemd[1]: Mounting Debug File System...
[    7.206533] systemd[1]: Starting Setup Virtual Console...
[    7.206982] systemd[1]: Starting Set default kernel console loglevel...
[    7.207818] systemd[1]: Mounting Huge Pages File System...
[    7.208225] systemd[1]: Mounting POSIX Message Queue File System...
[    7.267543] usb 3-1.3: New USB device found, idVendor=0bda, idProduct=0129
[    7.267550] usb 3-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    7.267555] usb 3-1.3: Product: USB2.0-CRW
[    7.267558] usb 3-1.3: Manufacturer: Generic
[    7.267562] usb 3-1.3: SerialNumber: 20100201396000000
[    7.275314] systemd-udevd[318]: starting version 194
[    7.340773] usb 3-1.4: new high-speed USB device number 5 using ehci-pci
[    7.341201] EXT4-fs (sda5): re-mounted. Opts: acl
[    7.397058] systemd-udevd[318]: invalid ACTION operation
[    7.397073] systemd-udevd[318]: invalid rule '/etc/udev/rules.d/56-hpmud.rules:3'
[    7.407801] systemd-udevd[318]: specified group 'scanner' unknown
[    7.420780] systemd-udevd[318]: GOTO 'mdv_net_end' has no matching label in: '/lib/udev/rules.d/76-net.rules'
[    7.420789] systemd-udevd[318]: GOTO 'mdv_net_end' has no matching label in: '/lib/udev/rules.d/76-net.rules'
[    7.481480] usb 3-1.4: New USB device found, idVendor=0bda, idProduct=58c2
[    7.481487] usb 3-1.4: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    7.481493] usb 3-1.4: Product: Laptop_Integrated_Webcam_HD
[    7.481496] usb 3-1.4: Manufacturer: CNFCH41F301030000950
[    7.481500] usb 3-1.4: SerialNumber: 0x0001
[    7.593899] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130328/utaddress-251)
[    7.593911] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.593917] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 1 (20130328/utaddress-251)
[    7.593923] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 2 (20130328/utaddress-251)
[    7.593929] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.593931] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 1 (20130328/utaddress-251)
[    7.593937] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 2 (20130328/utaddress-251)
[    7.593942] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.593944] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    7.706312] ACPI Warning: 0x0000000000004040-0x000000000000405f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130328/utaddress-251)
[    7.706323] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.759980] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x15
[    7.838514] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x15
[    7.839422] microcode: CPU0 updated to revision 0x19, date = 2013-06-13
[    7.839438] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x15
[    7.839680] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x15
[    7.840195] microcode: CPU1 updated to revision 0x19, date = 2013-06-13
[    7.840210] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x15
[    7.840255] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x15
[    7.840766] microcode: CPU2 updated to revision 0x19, date = 2013-06-13
[    7.841132] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x15
[    7.841175] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x15
[    7.841685] microcode: CPU3 updated to revision 0x19, date = 2013-06-13
[    7.842068] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    7.966304] ACPI: Requesting acpi_cpufreq
[    8.072512] vboxguest: PCI device not found, probably running on physical hardware.
[    8.091079] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    8.091348] r8169 0000:07:00.0: irq 45 for MSI/MSI-X
[    8.091601] r8169 0000:07:00.0 eth0: RTL8105e at 0xffffc90000646000, b8:ca:3a:e2:f6:a7, XID 00c00000 IRQ 45
[    8.134549] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[    8.153114] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[    8.290095] hda_codec: ALC282: SKU not ready 0x598301f0
[    8.290284] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    8.290288]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    8.290290]    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[    8.290292]    mono: mono_out=0x0
[    8.290294]    inputs:
[    8.290297]      Mic=0x19
[    8.290299]      Internal Mic=0x12
[    8.290302] realtek: No valid SSID, checking pincfg 0x598301f0 for NID 0x1d
[    8.290303] realtek: Enable default setup for auto mode as fallback
[    8.291960] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
[    8.345708] wmi: Mapper loaded
[    8.357824] usb 1-1: ep 0x2 - rounding interval to 8 microframes, ep desc says 10 microframes
[    8.357835] usb 1-1: ep 0x81 - rounding interval to 8 microframes, ep desc says 10 microframes
[    8.382306] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[    8.387443] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    8.387723] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    8.578314] iTCO_vendor_support: vendor-support=0
[    8.592092] cfg80211: Calling CRDA to update world regulatory domain
[    8.592160] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[    8.592203] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[    8.592356] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1)
[    8.714505] ACPI: AC Adapter [ACAD] (on-line)
[    8.945252] ACPI: Battery Slot [BAT1] (battery present)
[    9.006895] Bluetooth: Core ver 2.16
[    9.006922] NET: Registered protocol family 31
[    9.006925] Bluetooth: HCI device and connection manager initialized
[    9.006934] Bluetooth: HCI socket layer initialized
[    9.006938] Bluetooth: L2CAP socket layer initialized
[    9.006946] Bluetooth: SCO socket layer initialized
[    9.015625] rts5139: module is from the staging directory, the quality is unknown, you have been warned.
[    9.032405] scsi7 : SCSI emulation for RTS5139 USB card reader
[    9.033855] scsi 7:0:0:0: Direct-Access     Generic- xD/SD/M.S.       1.00 PQ: 0 ANSI: 0 CCS
[    9.034154] usbcore: registered new interface driver btusb
[    9.036736] sd 7:0:0:0: [sdb] Attached SCSI removable disk
[    9.037642] usbcore: registered new interface driver ath3k
[    9.097187] usbcore: registered new interface driver rts5139
[    9.110049] vboxguest: PCI device not found, probably running on physical hardware.
[    9.130395] cfg80211: World regulatory domain updated:
[    9.130399] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    9.130401] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    9.130403] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    9.130405] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    9.130406] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    9.130408] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    9.146808] ath: phy0: timeout (1000 us) on reg 0x15f18: 0x00000000 & 0x00000007 != 0x00000004
[    9.150006] ath: phy0: ASPM enabled: 0x43
[    9.150009] ath: EEPROM regdomain: 0x60
[    9.150011] ath: EEPROM indicates we should expect a direct regpair map
[    9.150013] ath: Country alpha2 being used: 00
[    9.150015] ath: Regpair used: 0x60
[    9.263191] input: Dell WMI hotkeys as /devices/virtual/input/input11
[    9.265397] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    9.265637] ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffc90010a80000, irq=17
[    9.370918] [drm] radeon kernel modesetting enabled.
[    9.370935] VGA switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle
[    9.370997] radeon 0000:01:00.0: enabling device (0000 -> 0003)
[    9.371242] [drm] initializing kernel modesetting (TURKS 0x1002:0x6840 0x1028:0x0598).
[    9.371285] [drm] register mmio base: 0xC0000000
[    9.371287] [drm] register mmio size: 131072
[    9.371290] vga_switcheroo: enabled
[    9.371454] ATPX version 1
[    9.696273] ipheth 1-1:4.2: Apple iPhone USB Ethernet device attached
[    9.696296] usbcore: registered new interface driver ipheth
[    9.774903] media: Linux media interface: v0.10
[    9.785400] Linux video capture interface: v2.00
[    9.800546] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_HD (0bda:58c2)
[    9.806207] input: Laptop_Integrated_Webcam_HD as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.4/3-1.4:1.0/input/input12
[    9.806291] usbcore: registered new interface driver uvcvideo
[    9.806293] USB Video Class driver (1.1.1)
[    9.820716] Adding 20473812k swap on /dev/sda1.  Priority:-1 extents:1 across:20473812k FS
[    9.944987] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: acl
[   10.113014] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: acl
[   10.117993] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: acl
[   10.246160] ATOM BIOS: Dell/Compal
[   10.246307] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[   10.246315] radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
[   10.246332] mtrr: no more MTRRs available
[   10.246336] [drm] Detected VRAM RAM=1024M, BAR=256M
[   10.246340] [drm] RAM width 128bits DDR
[   10.246563] [TTM] Zone  kernel: Available graphics memory: 1961388 kiB
[   10.246568] [TTM] Initializing pool allocator
[   10.246578] [TTM] Initializing DMA pool allocator
[   10.246629] [drm] radeon: 1024M of VRAM memory ready
[   10.246633] [drm] radeon: 512M of GTT memory ready.
[   10.249215] [drm] GART: num cpu pages 131072, num gpu pages 131072
[   10.250318] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[   10.251694] [drm] Loading TURKS Microcode
[   10.256000] [drm] PCIE GART of 512M enabled (table at 0x0000000000273000).
[   10.256204] radeon 0000:01:00.0: WB enabled
[   10.256209] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff88014f75ec00
[   10.256211] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff88014f75ec0c
[   10.256996] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90021f32118
[   10.257000] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   10.257001] [drm] Driver supports precise vblank timestamp query.
[   10.257022] radeon 0000:01:00.0: irq 47 for MSI/MSI-X
[   10.257034] radeon 0000:01:00.0: radeon: using MSI.
[   10.257068] [drm] radeon: irq initialized.
[   10.273640] [drm] ring test on 0 succeeded in 1 usecs
[   10.273703] [drm] ring test on 3 succeeded in 1 usecs
[   10.460762] [drm] ring test on 5 succeeded in 1 usecs
[   10.460765] [drm] UVD initialized successfully.
[   10.461007] [drm] ib test on ring 0 succeeded in 0 usecs
[   10.461055] [drm] ib test on ring 3 succeeded in 0 usecs
[   10.632780] [drm] ib test on ring 5 succeeded
[   10.632997] [drm] Radeon Display Connectors
[   10.634867] [drm] Internal thermal controller without fan control
[   10.635976] [drm] radeon: power management initialized
[   10.636118] radeon 0000:01:00.0: No connectors reported connected with modes
[   10.636121] [drm] Cannot find any crtc or sizes - going 1024x768
[   10.637988] [drm] fb mappable at 0xA0377000
[   10.637992] [drm] vram apper at 0xA0000000
[   10.637994] [drm] size 3145728
[   10.637997] [drm] fb depth is 24
[   10.638000] [drm]    pitch is 4096
[   10.638225] radeon 0000:01:00.0: fb1: radeondrmfb frame buffer device
[   10.638255] [drm] Initialized radeon 2.33.0 20080528 for 0000:01:00.0 on minor 1
[   10.823301] device-mapper: uevent: version 1.0.3
[   10.823762] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
[   11.115646] systemd-journald[319]: Received SIGUSR1
[   13.325487] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   13.325492] Bluetooth: BNEP filters: protocol multicast
[   13.325503] Bluetooth: BNEP socket layer initialized
[   13.559714] Bluetooth: RFCOMM TTY layer initialized
[   13.559729] Bluetooth: RFCOMM socket layer initialized
[   13.559731] Bluetooth: RFCOMM ver 1.11
[   13.906526] r8169 0000:07:00.0 eth0: link down
[   13.906566] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   14.152184] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   14.193886] NET: Registered protocol family 17
[   16.293911] wlan0: authenticate with fc:75:16:e8:4f:46
[   16.315382] wlan0: send auth to fc:75:16:e8:4f:46 (try 1/3)
[   16.317357] wlan0: authenticated
[   16.317601] ath9k 0000:08:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[   16.318022] wlan0: associate with fc:75:16:e8:4f:46 (try 1/3)
[   16.321055] wlan0: RX AssocResp from fc:75:16:e8:4f:46 (capab=0x11 status=0 aid=2)
[   16.321256] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   16.321338] wlan0: associated
[   16.321411] cfg80211: Calling CRDA for country: RU
[   16.329954] ath: regdomain 0x8283 updated by CountryIE
[   16.329963] ath: EEPROM regdomain: 0x8283
[   16.329966] ath: EEPROM indicates we should expect a country code
[   16.329970] ath: doing EEPROM country->regdmn map search
[   16.329974] ath: country maps to regdmn code: 0x3
[   16.329977] ath: Country alpha2 being used: RU
[   16.329980] ath: Regpair used: 0x3
[   16.330010] cfg80211: Regulatory domain changed to country: RU
[   16.330014] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   16.330021] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   16.330026] cfg80211:   (5735000 KHz - 5835000 KHz @ 20000 KHz), (N/A, 3000 mBm)
[   18.502023] tun: Universal TUN/TAP device driver, 1.6
[   18.502028] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[   19.729700] ------------[ cut here ]------------
[   19.729741] WARNING: at net/sched/sch_generic.c:255 dev_watchdog+0x258/0x270()
[   19.729747] NETDEV WATCHDOG: eth1 (ipheth): transmit queue 0 timed out
[   19.729753] Modules linked in: tun af_packet rfcomm bnep dm_mirror dm_region_hash dm_log dm_mod uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core videodev media ipheth radeon ttm dell_wmi arc4 ath9k ath9k_common ath9k_hw ath ath3k btusb rts5139(C) bluetooth mac80211 sparse_keymap battery ac intel_powerclamp coretemp iTCO_wdt kvm_intel iTCO_vendor_support cfg80211 kvm wmi joydev snd_hda_codec_hdmi evdev snd_hda_codec_realtek acpi_cpufreq mperf snd_hda_intel dell_laptop dcdbas r8169 mii rfkill snd_hda_codec processor crc32_pclmul crc32c_intel ghash_clmulni_intel cryptd snd_hwdep snd_pcm snd_page_alloc microcode i2c_i801 snd_timer snd soundcore lpc_ich binfmt_misc ipv6 autofs4 sr_mod ehci_pci xhci_hcd ehci_hcd usbcore usb_common i915 video button i2c_algo_bit drm_kms_helper drm i2c_core
[   19.729834] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G         C O 3.10.9-nrj-desktop-1rosa #1
[   19.729838] Hardware name: Dell Inc. Inspiron 3521/0N1XH2, BIOS A04 11/21/2012
[   19.729842]  0000000000000009 ffff88015f243d48 ffffffff81619eac ffff88015f243d88
[   19.729847]  ffffffff810587c0 0000000000014100 0000000000000000 ffff880156218000
[   19.729851]  ffff8801583e8c80 0000000000000001 0000000000000001 ffff88015f243de8
[   19.729856] Call Trace:
[   19.729859]  <IRQ>  [<ffffffff81619eac>] dump_stack+0x19/0x1b
[   19.729869]  [<ffffffff810587c0>] warn_slowpath_common+0x70/0xa0
[   19.729873]  [<ffffffff810588a6>] warn_slowpath_fmt+0x46/0x50
[   19.729879]  [<ffffffff81573578>] dev_watchdog+0x258/0x270
[   19.729884]  [<ffffffff81573320>] ? dev_graft_qdisc+0x90/0x90
[   19.729890]  [<ffffffff810692ba>] call_timer_fn+0x3a/0x180
[   19.729895]  [<ffffffff81573320>] ? dev_graft_qdisc+0x90/0x90
[   19.729900]  [<ffffffff81069614>] run_timer_softirq+0x214/0x2c0
[   19.729906]  [<ffffffff81060aef>] __do_softirq+0xef/0x2a0
[   19.729911]  [<ffffffff81060e15>] irq_exit+0xa5/0xb0
[   19.729919]  [<ffffffff81039a9e>] smp_apic_timer_interrupt+0x6e/0xa0
[   19.729925]  [<ffffffff81628c9d>] apic_timer_interrupt+0x6d/0x80
[   19.729928]  <EOI>  [<ffffffff810b48d4>] ? tick_program_event+0x24/0x30
[   19.729939]  [<ffffffff81512191>] ? cpuidle_enter_state+0x61/0xe0
[   19.729943]  [<ffffffff81512187>] ? cpuidle_enter_state+0x57/0xe0
[   19.729947]  [<ffffffff815122cb>] cpuidle_idle_call+0xbb/0x270
[   19.729953]  [<ffffffff8101d63e>] arch_cpu_idle+0xe/0x30
[   19.729959]  [<ffffffff810ab130>] cpu_startup_entry+0xd0/0x2e0
[   19.729968]  [<ffffffff8160afd2>] start_secondary+0x263/0x265
[   19.729972] ---[ end trace 385bd964d7c3e8e6 ]---
[   19.729978] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[   29.726550] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[   34.732913] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[   44.713617] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[   49.719966] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[   54.726264] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[   64.706974] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[   69.713320] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[   74.719685] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[   81.006956] wlan0: deauthenticating from fc:75:16:e8:4f:46 by local choice (reason=3)
[   81.010522] cfg80211: Calling CRDA to update world regulatory domain
[   81.021634] cfg80211: World regulatory domain updated:
[   81.021644] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   81.021662] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   81.021665] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   81.021668] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   81.021671] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   81.021674] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   81.523365] wlan0: authenticate with fc:75:16:e8:4f:46
[   81.536445] wlan0: send auth to fc:75:16:e8:4f:46 (try 1/3)
[   81.538549] wlan0: authenticated
[   81.538771] ath9k 0000:08:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[   81.539481] wlan0: associate with fc:75:16:e8:4f:46 (try 1/3)
[   81.542454] wlan0: RX AssocResp from fc:75:16:e8:4f:46 (capab=0x11 status=0 aid=2)
[   81.542973] wlan0: associated
[   81.543056] cfg80211: Calling CRDA for country: RU
[   81.552228] ath: regdomain 0x8283 updated by CountryIE
[   81.552238] ath: EEPROM regdomain: 0x8283
[   81.552241] ath: EEPROM indicates we should expect a country code
[   81.552245] ath: doing EEPROM country->regdmn map search
[   81.552249] ath: country maps to regdmn code: 0x3
[   81.552252] ath: Country alpha2 being used: RU
[   81.552254] ath: Regpair used: 0x3
[   81.552284] cfg80211: Regulatory domain changed to country: RU
[   81.552287] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   81.552292] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   81.552295] cfg80211:   (5735000 KHz - 5835000 KHz @ 20000 KHz), (N/A, 3000 mBm)
[   84.700451] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[   87.414986] fuse init (API version 7.22)
[   89.706745] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[   94.713186] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[  104.693806] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[  109.700162] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[  111.922680] hda-intel 0000:00:1b.0: Unstable LPIB (352748 >= 176400); disabling LPIB delay counting
[  114.706540] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[  124.687225] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[  129.693584] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[  134.699933] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[  144.680627] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[  159.683692] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[  169.680398] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[  174.686804] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[  184.667467] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[  189.673811] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[  204.660879] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[  214.673603] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[  224.654310] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[  234.667011] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[  249.654069] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[  259.650776] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[  269.647468] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[  274.654754] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[  289.640914] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[  304.627963] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[  309.634305] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[  314.640712] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[  334.634106] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[  349.621134] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[  359.617809] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[  369.614392] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[  374.620732] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[  384.601333] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[  389.607591] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[  509.567104] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[  514.573374] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[  524.554073] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[  529.560343] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[  539.557011] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[  559.550348] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[  569.546958] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[  579.543617] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[  594.546595] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[  609.533633] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[  614.539975] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[  624.520637] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[  639.523558] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[  649.520247] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[  654.526586] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[  664.507275] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[  669.513588] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[  674.519962] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[  684.500629] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[  704.493963] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[  709.500261] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[  714.506588] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[  734.499961] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[  749.486980] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[  754.493340] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[  764.473997] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[  784.467348] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[  799.470422] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[  809.467104] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[  824.454125] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[  834.466831] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[  844.447480] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[  849.453812] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[  854.460206] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[  864.440842] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[  874.453579] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[  889.440583] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[  999.403706] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 1009.400362] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 1014.406691] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 1024.387409] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 1029.393730] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 1039.390416] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 1049.387061] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 1054.393399] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 1064.374070] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 1069.380392] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 1084.367407] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 1099.370478] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 1109.367193] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 1114.373563] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 1124.354280] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 1134.366963] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 1144.347711] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 1149.354053] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 1154.360382] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 1169.347454] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 1184.334569] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 1194.347246] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 1204.327990] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 1214.340693] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 1224.321419] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 1239.324453] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 1249.321183] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 1254.327528] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 1264.308231] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 1279.311280] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 1289.307988] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 1294.314398] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 1304.295105] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 1314.307796] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 1324.288525] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 1339.291578] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 1349.288285] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 1354.294615] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 1364.275364] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 1369.281701] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 1379.278351] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 1489.242198] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 1499.238893] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 1509.235596] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 1519.232266] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 1529.229008] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 1539.225679] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 1549.222379] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 1559.219112] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 1579.212523] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 1589.209236] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 1594.215562] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 1609.202591] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 1619.199349] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 1634.202352] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 1644.183053] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 1654.195771] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 1669.182831] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 1684.169931] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 1689.176271] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 1699.172939] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 1709.169638] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 1719.166393] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 1729.163059] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 1739.159744] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 1749.156441] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 1764.143518] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 1779.146637] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 1789.143268] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 1794.149604] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 1804.130299] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 1814.143023] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 1829.130095] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 1834.136402] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 1854.129830] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 1864.110503] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 1979.080573] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 1989.077287] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 1999.073961] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 2014.077069] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 2024.057730] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 2029.064070] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 2034.070424] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 2049.057508] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 2059.054163] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 2079.047574] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 2089.044319] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 2094.050641] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 2104.031313] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 2119.034357] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 2129.031078] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 2134.037451] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 2144.018191] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 2149.024558] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 2154.030969] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 2164.011707] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 2174.024524] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 2184.005225] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 2189.011610] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 2194.017949] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 2203.998710] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 2209.005036] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 2214.011429] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 2223.992167] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 2228.998525] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 2234.004903] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 2243.985652] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 2253.998376] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 2263.979114] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 2268.985475] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 2273.991892] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 2288.978977] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 2293.985329] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 2303.966064] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 2318.969160] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 2328.965892] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 2333.972303] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 2348.959363] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 2468.920175] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 2473.926487] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 2483.907264] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 2488.913559] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 2503.900698] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 2513.913384] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 2523.894123] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 2528.901475] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 2533.906831] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 2543.887604] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 2548.893943] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 2553.900351] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 2563.881009] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 2568.887402] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 2573.893720] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 2583.874444] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 2588.880794] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 2603.867890] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 2613.880610] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 2623.861337] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 2643.854831] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 2658.857853] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 2668.854568] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 2673.860984] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 2683.841706] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 2688.848006] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 2698.844727] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 2708.841447] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 2718.838203] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 2733.841295] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 2743.822010] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 2758.825069] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 2768.821782] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 2773.828103] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 2788.815219] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
[ 2793.821589] ipheth 1-1:4.2: ipheth_tx_timeout: TX timeout
Вернуться к началу
xruss
Сообщения: 169
Зарегистрирован: 24 апр 2013, 15:38
Operating system: ROSA DESKTOP

Re: После обновления не запускаются X-ы.

Сообщение xruss » 24 окт 2013, 18:38

попробовал создать нового пользователя test.
но из под него та же самая проблема - заходит только под root. :(
Вернуться к началу
Аватара пользователя
akdengi
Сообщения: 1381
Зарегистрирован: 12 сен 2011, 13:44

Re: После обновления не запускаются X-ы.

Сообщение akdengi » 24 окт 2013, 21:21

А права на startx нормальные?

Код: Выделить всё

ls -al /usr/bin/startx
ls -al /usr/bin/Xorg
Также попробуйте

Код: Выделить всё

chown -hR user:user /home/user
где user - ваш пользователь. После этого понятно ребут.
Вернуться к началу
xruss
Сообщения: 169
Зарегистрирован: 24 апр 2013, 15:38
Operating system: ROSA DESKTOP

Re: После обновления не запускаются X-ы.

Сообщение xruss » 24 окт 2013, 22:09

Код: Выделить всё

[root@dell-notebook ~]# ls -al /usr/bin/startx
-rwxr-xr-x 1 root root 5003 мая   22 00:19 /usr/bin/startx*
[root@dell-notebook ~]# ls -al /usr/bin/Xorg
-rwxr-xr-x 1 root root 2133704 июля  29 16:24 /usr/bin/Xorg*
с правами, вроде бы нормально.
по поводу прав владельца позавчера так делал - не помогало. и сейчас ничего не помогло((

Код: Выделить всё

[root@dell-notebook ~]# chown -hR pavel:pavel /home/pavel
перезагрузился, не помогло((
может листинги каких-нибудь конфигов скинуть? или есть возможность реинстальнуть X-ы?
Вернуться к началу
Аватара пользователя
akdengi
Сообщения: 1381
Зарегистрирован: 12 сен 2011, 13:44

Re: После обновления не запускаются X-ы.

Сообщение akdengi » 24 окт 2013, 22:42

xruss писал(а):

Код: Выделить всё

[root@dell-notebook ~]# ls -al /usr/bin/startx
-rwxr-xr-x 1 root root 5003 мая   22 00:19 /usr/bin/startx*
[root@dell-notebook ~]# ls -al /usr/bin/Xorg
-rwxr-xr-x 1 root root 2133704 июля  29 16:24 /usr/bin/Xorg*
с правами, вроде бы нормально.
по поводу прав владельца позавчера так делал - не помогало. и сейчас ничего не помогло((

Код: Выделить всё

[root@dell-notebook ~]# chown -hR pavel:pavel /home/pavel
перезагрузился, не помогло((
может листинги каких-нибудь конфигов скинуть? или есть возможность реинстальнуть X-ы?
еще раз попробовать startx от юзверя и дать сюда /var/log/Xorg.0.log результата
Вернуться к началу
xruss
Сообщения: 169
Зарегистрирован: 24 апр 2013, 15:38
Operating system: ROSA DESKTOP

Re: После обновления не запускаются X-ы.

Сообщение xruss » 24 окт 2013, 22:51

попробовал startx от user`a, вот репорт:

Код: Выделить всё

[   559.971] 
X.Org X Server 1.13.4
Release Date: 2013-04-17
[   559.972] X Protocol Version 11, Revision 0
[   559.973] Build Operating System: Linux_3.6.7-nrj-desktop-1rosa mandriva
[   559.973] Current Operating System: Linux dell-notebook.localdomain 3.10.9-nrj-desktop-1rosa #1 SMP PREEMPT Tue Aug 27 19:36:40 MSK 2013 x86_64
[   559.974] Kernel command line: BOOT_IMAGE=/vmlinuz-3.10.9-nrj-desktop-1rosa root=UUID=253ce70b-8f74-478b-b55e-07bd1f399c05 ro splash=silent logo.nologo resume=/dev/sda1 init=/lib/systemd/systemd
[   559.976] Build Date: 29 July 2013  04:21:09PM
[   559.977]  
[   559.977] Current version of pixman: 0.28.2
[   559.979] 	Before reporting problems, check http://qa.mandriva.com
	to make sure that you have the latest version.
[   559.979] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   559.983] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Oct 24 22:29:25 2013
[   559.984] (==) Using config file: "/etc/X11/xorg.conf"
[   559.985] (==) Using config directory: "/etc/X11/xorg.conf.d"
[   559.986] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   559.988] (==) ServerLayout "layout1"
[   559.988] (**) |-->Screen "screen1" (0)
[   559.988] (**) |   |-->Monitor "monitor1"
[   559.989] (**) |   |-->Device "device1"
[   559.989] (**) Option "DontZap" "False"
[   559.989] (**) Option "AllowMouseOpenFail"
[   559.989] (==) Automatically adding devices
[   559.989] (==) Automatically enabling devices
[   559.989] (==) Automatically adding GPU devices
[   559.990] (==) FontPath set to:
	catalogue:/etc/X11/fontpath.d
[   559.990] (==) ModulePath set to "/usr/lib64/xorg/extra-modules,/usr/lib64/xorg/modules"
[   559.990] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[   559.990] (II) Loader magic: 0x7fdc20
[   559.990] (II) Module ABI versions:
[   559.990] 	X.Org ANSI C Emulation: 0.4
[   559.990] 	X.Org Video Driver: 13.1
[   559.990] 	X.Org XInput driver : 18.0
[   559.990] 	X.Org Server Extension : 7.0
[   559.990] (II) config/udev: Adding drm device (/dev/dri/card1)
[   559.990] (II) config/udev: Adding drm device (/dev/dri/card0)
[   559.991] (--) PCI:*(0:0:2:0) 8086:0166:1028:0598 rev 9, Mem @ 0xc1000000/4194304, 0xb0000000/268435456, I/O @ 0x00004000/64
[   559.991] (--) PCI: (0:1:0:0) 1002:6840:1028:0598 rev 0, Mem @ 0xa0000000/268435456, 0xc0000000/131072, I/O @ 0x00003000/256, BIOS @ 0x????????/131072
[   559.991] (II) Open ACPI successful (/var/run/acpid.socket)
[   560.033] Initializing built-in extension Generic Event Extension
[   560.034] Initializing built-in extension SHAPE
[   560.035] Initializing built-in extension MIT-SHM
[   560.036] Initializing built-in extension XInputExtension
[   560.037] Initializing built-in extension XTEST
[   560.038] Initializing built-in extension BIG-REQUESTS
[   560.039] Initializing built-in extension SYNC
[   560.041] Initializing built-in extension XKEYBOARD
[   560.042] Initializing built-in extension XC-MISC
[   560.043] Initializing built-in extension SECURITY
[   560.044] Initializing built-in extension XINERAMA
[   560.045] Initializing built-in extension XFIXES
[   560.046] Initializing built-in extension XFree86-Bigfont
[   560.047] Initializing built-in extension RENDER
[   560.048] Initializing built-in extension RANDR
[   560.049] Initializing built-in extension COMPOSITE
[   560.050] Initializing built-in extension DAMAGE
[   560.051] Initializing built-in extension MIT-SCREEN-SAVER
[   560.052] Initializing built-in extension DOUBLE-BUFFER
[   560.053] Initializing built-in extension RECORD
[   560.054] Initializing built-in extension DPMS
[   560.055] Initializing built-in extension X-Resource
[   560.056] Initializing built-in extension XVideo
[   560.056] Initializing built-in extension XVideo-MotionCompensation
[   560.057] Initializing built-in extension XFree86-VidModeExtension
[   560.058] Initializing built-in extension XFree86-DGA
[   560.059] Initializing built-in extension XFree86-DRI
[   560.060] Initializing built-in extension DRI2
[   560.060] (II) "glx" will be loaded by default.
[   560.060] (II) LoadModule: "v4l"
[   560.060] (II) Loading /usr/lib64/xorg/modules/drivers/v4l_drv.so
[   560.061] (II) Module v4l: vendor="X.Org Foundation"
[   560.061] 	compiled for 1.13.0, module version = 0.1.1
[   560.061] 	ABI class: X.Org Video Driver, version 13.0
[   560.061] (II) LoadModule: "glx"
[   560.062] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[   560.065] (II) Module glx: vendor="X.Org Foundation"
[   560.065] 	compiled for 1.13.4, module version = 1.0.0
[   560.065] 	ABI class: X.Org Server Extension, version 7.0
[   560.065] (==) AIGLX enabled
[   560.066] Loading extension GLX
[   560.066] (II) LoadModule: "intel"
[   560.066] (II) Loading /usr/lib64/xorg/modules/drivers/intel_drv.so
[   560.071] (II) Module intel: vendor="X.Org Foundation"
[   560.071] 	compiled for 1.13.2, module version = 2.21.6
[   560.071] 	Module class: X.Org Video Driver
[   560.071] 	ABI class: X.Org Video Driver, version 13.1
[   560.071] (II) v4l driver for Video4Linux
[   560.071] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
	i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
	E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
	965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
	4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
	Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
	Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
	Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
	Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
	Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
	Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
	Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
	Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
	Haswell Server (GT2+), Haswell SDV Desktop (GT1),
	Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
	Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
	Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
	Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
	Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
	Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
	Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
	Haswell ULT Server (GT1), Haswell ULT Server (GT2),
	Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
	Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
	Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
	Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
	Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
	ValleyView PO board
[   560.072] (++) using VT number 1

[   560.072] (WW) Falling back to old probe method for v4l
[   560.072] (II) intel(0): Creating default Display subsection in Screen section
	"screen1" for depth/fbbpp 24/32
[   560.072] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[   560.072] (==) intel(0): RGB weight 888
[   560.072] (==) intel(0): Default visual is TrueColor
[   560.072] (--) intel(0): Integrated Graphics Chipset: Intel(R) Ivybridge Mobile (GT2)
[   560.072] (**) intel(0): Relaxed fencing enabled
[   560.072] (**) intel(0): Wait on SwapBuffers? enabled
[   560.072] (**) intel(0): Triple buffering? enabled
[   560.072] (**) intel(0): Framebuffer tiled
[   560.072] (**) intel(0): Pixmaps tiled
[   560.072] (**) intel(0): 3D buffers tiled
[   560.073] (**) intel(0): SwapBuffers wait enabled
[   560.073] (==) intel(0): video overlay key set to 0x101fe
[   560.073] (II) intel(0): Output LVDS1 using monitor section monitor1
[   560.073] (--) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[   560.089] (II) intel(0): Output VGA1 has no monitor section
[   560.089] (II) intel(0): Output HDMI1 has no monitor section
[   560.089] (II) intel(0): Output DP1 has no monitor section
[   560.089] (II) intel(0): EDID for output LVDS1
[   560.089] (II) intel(0): Manufacturer: LGD  Model: 3ab  Serial#: 0
[   560.089] (II) intel(0): Year: 2012  Week: 0
[   560.089] (II) intel(0): EDID Version: 1.4
[   560.089] (II) intel(0): Digital Display Input
[   560.089] (II) intel(0): 6 bits per channel
[   560.089] (II) intel(0): Digital interface is undefined
[   560.089] (II) intel(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[   560.089] (II) intel(0): Gamma: 2.20
[   560.089] (II) intel(0): No DPMS capabilities specified
[   560.089] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[   560.089] (II) intel(0): First detailed timing is preferred mode
[   560.089] (II) intel(0): Preferred mode is native pixel format and refresh rate
[   560.089] (II) intel(0): redX: 0.578 redY: 0.344   greenX: 0.337 greenY: 0.571
[   560.089] (II) intel(0): blueX: 0.159 blueY: 0.120   whiteX: 0.313 whiteY: 0.329
[   560.089] (II) intel(0): Manufacturer's mask: 0
[   560.089] (II) intel(0): Supported detailed timing:
[   560.089] (II) intel(0): clock: 76.8 MHz   Image Size:  344 x 194 mm
[   560.089] (II) intel(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1618 h_border: 0
[   560.089] (II) intel(0): v_active: 768  v_sync: 771  v_sync_end 776 v_blanking: 790 v_border: 0
[   560.089] (II) intel(0): Supported detailed timing:
[   560.089] (II) intel(0): clock: 51.2 MHz   Image Size:  344 x 194 mm
[   560.089] (II) intel(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1618 h_border: 0
[   560.089] (II) intel(0): v_active: 768  v_sync: 771  v_sync_end 776 v_blanking: 790 v_border: 0
[   560.089] (II) intel(0):  N3KMPЂ156WH3
[   560.089] (II) intel(0): Unknown vendor-specific block 0
[   560.089] (II) intel(0): EDID (in hex):
[   560.089] (II) intel(0): 	00ffffffffffff0030e4ab0300000000
[   560.089] (II) intel(0): 	00160104902213780a05f59458569228
[   560.089] (II) intel(0): 	1e505400000001010101010101010101
[   560.089] (II) intel(0): 	010101010101fb1d56fc500016303020
[   560.089] (II) intel(0): 	350058c21000001afc1356fc50001630
[   560.089] (II) intel(0): 	3020350058c21000001a000000fe004e
[   560.089] (II) intel(0): 	334b4d50803135365748330a00000000
[   560.089] (II) intel(0): 	00004131940010000001010a202000d0
[   560.089] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[   560.089] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[   560.089] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[   560.089] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[   560.090] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[   560.090] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[   560.090] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[   560.090] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[   560.090] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[   560.090] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[   560.090] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[   560.090] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[   560.090] (II) intel(0): Printing probed modes for output LVDS1
[   560.090] (II) intel(0): Modeline "1366x768"x60.0   76.75  1366 1414 1446 1618  768 771 776 790 +hsync -vsync (47.4 kHz eP)
[   560.090] (II) intel(0): Modeline "1366x768"x40.0   51.16  1366 1414 1446 1618  768 771 776 790 +hsync -vsync (31.6 kHz e)
[   560.090] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[   560.090] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[   560.090] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[   560.090] (II) intel(0): Modeline "768x576"x100.0   63.07  768 800 960 1024  576 578 590 616 (61.6 kHz)
[   560.090] (II) intel(0): Modeline "768x576"x79.4   50.00  768 832 846 1000  576 590 595 630 (50.0 kHz)
[   560.090] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[   560.106] (II) intel(0): EDID for output VGA1
[   560.106] (II) intel(0): EDID for output HDMI1
[   560.106] (II) intel(0): EDID for output DP1
[   560.106] (II) intel(0): Output LVDS1 connected
[   560.106] (II) intel(0): Output VGA1 disconnected
[   560.106] (II) intel(0): Output HDMI1 disconnected
[   560.106] (II) intel(0): Output DP1 disconnected
[   560.106] (II) intel(0): Using exact sizes for initial modes
[   560.106] (II) intel(0): Output LVDS1 using initial mode 1366x768
[   560.106] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[   560.106] (II) intel(0): Kernel page flipping support detected, enabling
[   560.106] (==) intel(0): DPI set to (96, 96)
[   560.106] (II) Loading sub module "fb"
[   560.106] (II) LoadModule: "fb"
[   560.106] (II) Loading /usr/lib64/xorg/modules/libfb.so
[   560.108] (II) Module fb: vendor="X.Org Foundation"
[   560.108] 	compiled for 1.13.4, module version = 1.0.0
[   560.108] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   560.108] (II) Loading sub module "dri2"
[   560.108] (II) LoadModule: "dri2"
[   560.108] (II) Module "dri2" already built-in
[   560.108] (==) Depth 24 pixmap format is 32 bpp
[   560.109] (II) intel(0): [DRI2] Setup complete
[   560.109] (II) intel(0): [DRI2]   DRI driver: i965
[   560.109] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[   560.111] (II) UXA(0): Driver registered support for the following operations:
[   560.111] (II)         solid
[   560.111] (II)         copy
[   560.111] (II)         composite (RENDER acceleration)
[   560.111] (II)         put_image
[   560.111] (II)         get_image
[   560.111] (==) intel(0): Backing store disabled
[   560.111] (==) intel(0): Silken mouse enabled
[   560.111] (II) intel(0): Initializing HW Cursor
[   560.111] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[   560.112] (**) intel(0): DPMS enabled
[   560.112] (==) intel(0): Intel XvMC decoder enabled
[   560.154] (II) intel(0): Set up textured video
[   560.154] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[   560.154] (II) intel(0): direct rendering: DRI2 Enabled
[   560.154] (==) intel(0): hotplug detection: "enabled"
[   560.178] (--) RandR disabled
[   560.214] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[   560.214] (II) AIGLX: enabled GLX_INTEL_swap_event
[   560.214] (II) AIGLX: enabled GLX_ARB_create_context
[   560.214] (II) AIGLX: enabled GLX_ARB_create_context_profile
[   560.214] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[   560.214] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[   560.214] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[   560.214] (II) AIGLX: Loaded and initialized i965
[   560.214] (II) GLX: Initialized DRI2 GL provider for screen 0
[   560.215] (II) intel(0): Setting screen physical size to 361 x 203
[   560.390] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[   560.390] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   560.390] (II) LoadModule: "evdev"
[   560.391] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[   560.392] (II) Module evdev: vendor="X.Org Foundation"
[   560.392] 	compiled for 1.13.4, module version = 2.8.2
[   560.392] 	Module class: X.Org XInput Driver
[   560.392] 	ABI class: X.Org XInput driver, version 18.0
[   560.392] (II) Using input driver 'evdev' for 'Power Button'
[   560.392] (**) Power Button: always reports core events
[   560.392] (**) evdev: Power Button: Device: "/dev/input/event4"
[   560.392] (--) evdev: Power Button: Vendor 0 Product 0x1
[   560.392] (--) evdev: Power Button: Found keys
[   560.392] (II) evdev: Power Button: Configuring as keyboard
[   560.392] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[   560.392] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[   560.392] (**) Option "xkb_rules" "evdev"
[   560.392] (**) Option "xkb_model" "pc105"
[   560.392] (**) Option "xkb_layout" "us,ru"
[   560.392] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll,compose:rwin"
[   560.439] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[   560.439] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[   560.439] (II) Using input driver 'evdev' for 'Video Bus'
[   560.439] (**) Video Bus: always reports core events
[   560.439] (**) evdev: Video Bus: Device: "/dev/input/event6"
[   560.439] (--) evdev: Video Bus: Vendor 0 Product 0x6
[   560.439] (--) evdev: Video Bus: Found keys
[   560.439] (II) evdev: Video Bus: Configuring as keyboard
[   560.439] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input6/event6"
[   560.439] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[   560.439] (**) Option "xkb_rules" "evdev"
[   560.439] (**) Option "xkb_model" "pc105"
[   560.439] (**) Option "xkb_layout" "us,ru"
[   560.439] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll,compose:rwin"
[   560.440] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[   560.440] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   560.440] (II) Using input driver 'evdev' for 'Power Button'
[   560.440] (**) Power Button: always reports core events
[   560.440] (**) evdev: Power Button: Device: "/dev/input/event2"
[   560.440] (--) evdev: Power Button: Vendor 0 Product 0x1
[   560.440] (--) evdev: Power Button: Found keys
[   560.440] (II) evdev: Power Button: Configuring as keyboard
[   560.440] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0C:00/input/input2/event2"
[   560.440] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[   560.440] (**) Option "xkb_rules" "evdev"
[   560.440] (**) Option "xkb_model" "pc105"
[   560.440] (**) Option "xkb_layout" "us,ru"
[   560.440] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll,compose:rwin"
[   560.441] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[   560.441] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[   560.441] (II) Using input driver 'evdev' for 'Video Bus'
[   560.441] (**) Video Bus: always reports core events
[   560.441] (**) evdev: Video Bus: Device: "/dev/input/event5"
[   560.442] (--) evdev: Video Bus: Vendor 0 Product 0x6
[   560.442] (--) evdev: Video Bus: Found keys
[   560.442] (II) evdev: Video Bus: Configuring as keyboard
[   560.442] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2c/LNXVIDEO:00/input/input5/event5"
[   560.442] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 9)
[   560.442] (**) Option "xkb_rules" "evdev"
[   560.442] (**) Option "xkb_model" "pc105"
[   560.442] (**) Option "xkb_layout" "us,ru"
[   560.442] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll,compose:rwin"
[   560.443] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[   560.443] (II) No input driver specified, ignoring this device.
[   560.443] (II) This device may have been added with another device file.
[   560.443] (II) config/udev: Adding drm device (/dev/dri/card1)
[   560.443] (II) config/udev: Adding drm device (/dev/dri/card0)
[   560.444] (II) config/udev: Adding input device Laptop_Integrated_Webcam_HD (/dev/input/event12)
[   560.444] (**) Laptop_Integrated_Webcam_HD: Applying InputClass "evdev keyboard catchall"
[   560.444] (II) Using input driver 'evdev' for 'Laptop_Integrated_Webcam_HD'
[   560.444] (**) Laptop_Integrated_Webcam_HD: always reports core events
[   560.444] (**) evdev: Laptop_Integrated_Webcam_HD: Device: "/dev/input/event12"
[   560.444] (--) evdev: Laptop_Integrated_Webcam_HD: Vendor 0xbda Product 0x58c2
[   560.444] (--) evdev: Laptop_Integrated_Webcam_HD: Found keys
[   560.444] (II) evdev: Laptop_Integrated_Webcam_HD: Configuring as keyboard
[   560.444] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input12/event12"
[   560.444] (II) XINPUT: Adding extended input device "Laptop_Integrated_Webcam_HD" (type: KEYBOARD, id 10)
[   560.444] (**) Option "xkb_rules" "evdev"
[   560.444] (**) Option "xkb_model" "pc105"
[   560.444] (**) Option "xkb_layout" "us,ru"
[   560.444] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll,compose:rwin"
[   560.445] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
[   560.445] (II) No input driver specified, ignoring this device.
[   560.446] (II) This device may have been added with another device file.
[   560.446] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event10)
[   560.446] (II) No input driver specified, ignoring this device.
[   560.446] (II) This device may have been added with another device file.
[   560.446] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event8)
[   560.447] (II) No input driver specified, ignoring this device.
[   560.447] (II) This device may have been added with another device file.
[   560.447] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event9)
[   560.447] (II) No input driver specified, ignoring this device.
[   560.447] (II) This device may have been added with another device file.
[   560.447] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[   560.448] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[   560.448] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[   560.448] (**) AT Translated Set 2 keyboard: always reports core events
[   560.448] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[   560.448] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[   560.448] (--) evdev: AT Translated Set 2 keyboard: Found keys
[   560.448] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[   560.448] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[   560.448] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[   560.448] (**) Option "xkb_rules" "evdev"
[   560.448] (**) Option "xkb_model" "pc105"
[   560.448] (**) Option "xkb_layout" "us,ru"
[   560.448] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll,compose:rwin"
[   560.449] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event1)
[   560.449] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[   560.449] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[   560.449] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[   560.449] (II) LoadModule: "synaptics"
[   560.450] (II) Loading /usr/lib64/xorg/modules/input/synaptics_drv.so
[   560.452] (II) Module synaptics: vendor="X.Org Foundation"
[   560.452] 	compiled for 1.13.4, module version = 1.7.1
[   560.452] 	Module class: X.Org XInput Driver
[   560.452] 	ABI class: X.Org XInput driver, version 18.0
[   560.452] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[   560.452] (**) SynPS/2 Synaptics TouchPad: always reports core events
[   560.452] (**) Option "Device" "/dev/input/event1"
[   560.474] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5674 (res 44)
[   560.474] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4754 (res 68)
[   560.474] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[   560.474] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[   560.474] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[   560.474] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[   560.474] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[   560.474] (**) SynPS/2 Synaptics TouchPad: always reports core events
[   560.484] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input1/event1"
[   560.484] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
[   560.484] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[   560.484] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[   560.484] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.037
[   560.485] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[   560.485] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[   560.485] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[   560.485] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[   560.485] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[   560.486] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[   560.486] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[   560.487] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event11)
[   560.487] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[   560.487] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
[   560.487] (**) Dell WMI hotkeys: always reports core events
[   560.487] (**) evdev: Dell WMI hotkeys: Device: "/dev/input/event11"
[   560.487] (--) evdev: Dell WMI hotkeys: Vendor 0 Product 0
[   560.487] (--) evdev: Dell WMI hotkeys: Found keys
[   560.487] (II) evdev: Dell WMI hotkeys: Configuring as keyboard
[   560.487] (**) Option "config_info" "udev:/sys/devices/virtual/input/input11/event11"
[   560.487] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 13)
[   560.487] (**) Option "xkb_rules" "evdev"
[   560.487] (**) Option "xkb_model" "pc105"
[   560.488] (**) Option "xkb_layout" "us,ru"
[   560.488] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll,compose:rwin"
[   564.637] (II) intel(0): EDID vendor "LGD", prod id 939
[   564.637] (II) intel(0): Printing DDC gathered Modelines:
[   564.637] (II) intel(0): Modeline "1366x768"x0.0   76.75  1366 1414 1446 1618  768 771 776 790 +hsync -vsync (47.4 kHz eP)
[   564.637] (II) intel(0): Modeline "1366x768"x0.0   51.16  1366 1414 1446 1618  768 771 776 790 +hsync -vsync (31.6 kHz e)
[   566.056] (II) intel(0): EDID vendor "LGD", prod id 939
[   566.056] (II) intel(0): Printing DDC gathered Modelines:
[   566.056] (II) intel(0): Modeline "1366x768"x0.0   76.75  1366 1414 1446 1618  768 771 776 790 +hsync -vsync (47.4 kHz eP)
[   566.056] (II) intel(0): Modeline "1366x768"x0.0   51.16  1366 1414 1446 1618  768 771 776 790 +hsync -vsync (31.6 kHz e)
[   572.620] (II) intel(0): EDID vendor "LGD", prod id 939
[   572.620] (II) intel(0): Printing DDC gathered Modelines:
[   572.621] (II) intel(0): Modeline "1366x768"x0.0   76.75  1366 1414 1446 1618  768 771 776 790 +hsync -vsync (47.4 kHz eP)
[   572.621] (II) intel(0): Modeline "1366x768"x0.0   51.16  1366 1414 1446 1618  768 771 776 790 +hsync -vsync (31.6 kHz e)
[  1485.106] (II) evdev: Dell WMI hotkeys: Close
[  1485.106] (II) UnloadModule: "evdev"
[  1485.106] (II) UnloadModule: "synaptics"
[  1485.106] (II) evdev: AT Translated Set 2 keyboard: Close
[  1485.106] (II) UnloadModule: "evdev"
[  1485.106] (II) evdev: Laptop_Integrated_Webcam_HD: Close
[  1485.106] (II) UnloadModule: "evdev"
[  1485.106] (II) evdev: Video Bus: Close
[  1485.106] (II) UnloadModule: "evdev"
[  1485.106] (II) evdev: Power Button: Close
[  1485.106] (II) UnloadModule: "evdev"
[  1485.106] (II) evdev: Video Bus: Close
[  1485.106] (II) UnloadModule: "evdev"
[  1485.106] (II) evdev: Power Button: Close
[  1485.106] (II) UnloadModule: "evdev"
[  1485.812] Server terminated successfully (0). Closing log file.
Вернуться к началу
Аватара пользователя
akdengi
Сообщения: 1381
Зарегистрирован: 12 сен 2011, 13:44

Re: После обновления не запускаются X-ы.

Сообщение akdengi » 24 окт 2013, 23:20

А в самом начале после startx на что нибудь ругается (первые строки)?
Вернуться к началу
xruss
Сообщения: 169
Зарегистрирован: 24 апр 2013, 15:38
Operating system: ROSA DESKTOP

Re: После обновления не запускаются X-ы.

Сообщение xruss » 24 окт 2013, 23:32

вот так:
Изображение
Вернуться к началу
Аватара пользователя
akdengi
Сообщения: 1381
Зарегистрирован: 12 сен 2011, 13:44

Re: После обновления не запускаются X-ы.

Сообщение akdengi » 25 окт 2013, 18:12

Попробуйте от root

chmod u+s /usr/bin/Xorg
Вернуться к началу
xruss
Сообщения: 169
Зарегистрирован: 24 апр 2013, 15:38
Operating system: ROSA DESKTOP

Re: После обновления не запускаются X-ы.

Сообщение xruss » 26 окт 2013, 00:03

akdengi писал(а):chmod u+s /usr/bin/Xorg
не помогло :(
Вернуться к началу
xruss
Сообщения: 169
Зарегистрирован: 24 апр 2013, 15:38
Operating system: ROSA DESKTOP

Re: После обновления не запускаются X-ы.

Сообщение xruss » 26 окт 2013, 11:55

Код: Выделить всё

[root@dell-notebook ~]# [root@dell-notebook ~]# update-alternatives --config gl_conf
There are 3 choices for the alternative gl_conf (providing /etc/ld.so.conf.d/GL.conf).

  Selection    Path                                Priority   Status
------------------------------------------------------------
  0            /etc/ld.so.conf.d/GL/ati.conf        1000      auto mode
  1            /etc/fglrx/pxpress-free.ld.so.conf   50        manual mode
  2            /etc/ld.so.conf.d/GL/ati.conf        1000      manual mode
* 3            /etc/ld.so.conf.d/GL/standard.conf   500       manual mode

Press enter to keep the current choice[*], or type selection number: 3
update-alternatives: warning: forcing reinstallation of alternative /etc/ld.so.conf.d/GL/standard.conf because link group gl_conf is broken
update-alternatives: warning: not removing /etc/X11/XvMCConfig since it's not a symlink
что лучше выбрать? в последнее время пытался поиграть настройками XFdrake
кроме того самое обидное, что в XFdrake в Vendor нет драйвера для Radeon HD 7500M/7600M (у проприетарных драйверов будет отмечено 3D ускорение?):
Изображение
из lspci...

Код: Выделить всё

VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Thames [Radeon HD 7500M/7600M Series]
Вернуться к началу
xruss
Сообщения: 169
Зарегистрирован: 24 апр 2013, 15:38
Operating system: ROSA DESKTOP

Re: После обновления не запускаются X-ы.

Сообщение xruss » 29 окт 2013, 13:54

а по x`ам есть еще варианты как исправить их загрузку? или я один такой счастливый обладатель ноутбука dell? :(
может Rosa Marathon с моим ноутом будет работать норм? что мне лучше делать?
Вернуться к началу
Аватара пользователя
akdengi
Сообщения: 1381
Зарегистрирован: 12 сен 2011, 13:44

Re: После обновления не запускаются X-ы.

Сообщение akdengi » 29 окт 2013, 14:25

Не надо запускать Xfdrake - видеокарта ATI работать не будет, так как до сих пор нет работающей перключалки для гибрида в ядрах для блобов. То есть ставите систему и живете на Интеле и возможно будет задействана ATI карта через свободные драйвера. Вы же пытаетесь поставить драйвера AMD, причем проприетарные, и ломаете иксы.
Вернуться к началу
xruss
Сообщения: 169
Зарегистрирован: 24 апр 2013, 15:38
Operating system: ROSA DESKTOP

Re: После обновления не запускаются X-ы.

Сообщение xruss » 29 окт 2013, 14:30

в том то все и дело, что я в руте сижу от intell`a, а пользователь под тем же интелом запустить иксы не может((
Вернуться к началу
Аватара пользователя
akdengi
Сообщения: 1381
Зарегистрирован: 12 сен 2011, 13:44

Re: После обновления не запускаются X-ы.

Сообщение akdengi » 29 окт 2013, 14:42

xruss писал(а):в том то все и дело, что я в руте сижу от intell`a, а пользователь под тем же интелом запустить иксы не может((
Тут только переустановить. Просто непонятно где права сбились :(
Вернуться к началу
xruss
Сообщения: 169
Зарегистрирован: 24 апр 2013, 15:38
Operating system: ROSA DESKTOP

Re: После обновления не запускаются X-ы.

Сообщение xruss » 29 окт 2013, 15:12

а если после переустановки, получится таже самая фигня, что нужно будет сделать?
(я уже делал переустановку несколько раз) :(. после обновлений системы иксы перестают загружаться.
Вернуться к началу
xruss
Сообщения: 169
Зарегистрирован: 24 апр 2013, 15:38
Operating system: ROSA DESKTOP

Re: После обновления не запускаются X-ы.

Сообщение xruss » 29 окт 2013, 20:13

переустановка не решила проблемы.
сразу после установки системы:
Изображение
а это сразу после установки обновлений :(
Изображение

и самое интересное, от рута запустил XFdrake в терминале, выбрал Intell и выбрал АВТОМАТИЧЕСКИ ЗАПУСКАТЬ ГРАФИЧЕСКИЙ ИНТЕРФЕЙС (Xorg).
В этом варианте он грузит иксы и предлагает вход под пользователем. :)

вот только как сделать так, чтобы можно было работать от пользователя с командой startx в терминале, как раньше? а не загружаться автоматом в иксы :(
Вернуться к началу
Ответить

Вернуться в «Обсуждение ROSA Fresh R2, R3 (платформа 2012.1)»